X1002

X1002 pcie to nvme shield bottom

File:X1002-IMG-7128.jpg

X1002 pcie to nvme shield bottom

X1002 supports official active cooler also

Overview

The X1002 V1.0 shield is an bottom NVME M2 2280 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting.

Model	Compatible with	Position	NVMe M2 SSD Support
X1000	Raspberry Pi 5	Top	Support 2230/2242 NVMe M2 SSD
X1001	Raspberry Pi 5	Top	Support 2230/2242/2260/2280 NVMe M2 SSD
X1002	Raspberry Pi 5	Bottom	Support 2230/2242/2260/2280 NVMe M2 SSD

Features

• Full Compatible with other HAT shield;
• Customized FPC cable for easy use of TF card
• Supports installation of official active coolers also;
• With ACT LED Indicators;
• Supports 2230/2242/2260/2280 NVME M2 SSD.
• Can Power the X1002 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)

PS:

1. The X1002 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS.
2. Do not reserve the nut column to fix the 2230/2242/2260 SSD, users need to find proper way to fix them.

Test Reviews

Reter to X1001#Test Reviews

Packing List

• 1 x X1002 V1.0 NVMe SSD Shield bottom
• 1 x PCIe FPC Cable
• 4 x M2.5x5mm F/F Spacers
• 4 x M2.5x10mm Screws
• 1 x M2x4mm Screws (to fix NVMe M2 SSD)

User Manual

• X1002 hardware description: X1002 Hardware
• X1002 software tutorials: NVMe SSD boot with the Raspberry Pi 5
• Raspberry pi 5 pcie connector pin out

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #16

8 days ago

Score 0

Crucial P3 Plus 500 GB works after update to eeprom firmware 2024 - 04 - 20

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #14

2 months ago

Score 0

Just purchased and discovered the mess with the screws... SHAME ON YOU! people are complaining about this since a month and you still sell this kit with wrong screws! Please provide detailed specs on what screws should I buy now. I can't wait for sending back the item and search for an alternative!

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

one month ago

Score 0

Hi,Sorry for the inconvenience, could you tell us your order number? Where did you buy it? It may be a problem with the mounting holes of the X1002 board. Please contact us via email and we will provide a solution. support@geekworm.com

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #15

15 days ago

Score 0

We apologize, but if you find the wrong screws, please simply request a refund.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #13

2 months ago

Score 0

I had to drill out the holes in the standoffs on the board to get the screws through the raspi and the X1002...used the brass nuts to secure the screws on the X1002 side. Worked and X1002 functions.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Harry

2 months ago

Score 0

We are very sorry, this is our mistake, we have also discovered this problem and are working on it. You can return it for a refund

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #12

2 months ago

Score 0

Same here screws will not fit

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #11

2 months ago

Score 0

How to fix a 2240 nvme ssh.. there is a hole but no fix for the screw

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #11

2 months ago

Score 0

I mean 2230 or 2242

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #10

2 months ago

Score 0

Would this support the Coral M.2 Accelerator B+M key, aka Edge TPU?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #8

2 months ago

Score 0

Just received my unit and the M2.5x10mm screws do not fit in the X1002--it seems like the integrated standoffs were tapped incorrectly.

The screws fit fine in the M2.5x5mm gold standoffs.

Anybody else have this issue--am I crazy? I've done many M2.5 projects.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #9

2 months ago

Score 0

Same here: those 4 standoffs have been implemented as M2. That will no longer fit the screws and / or the 4 5mm feet.

In my delivery it says X1002 V1.1 - maybe te problem is in all deliveries with V1.1 ??

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #7

3 months ago

Score 0

Pi nub here. Just installed one of these with an XPG SX8200 Pro 1TB SSD and it doesn't seem to work. Amended config.txt OK.

What should I be seeing with lspci, or what other way can I check its installed ok?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #7

3 months ago

Score 0

Found a solution to my XPG SSD not installing... From terminal I ran: sudo rpi-eeprom-config -e Added PCIE_PROBE=1 to the end of the file, saved file, rebooted. Blue light now on on X1002 and drive recognised by Pi.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

3 months ago

Score 0

Thanks for sharing!

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #6

3 months ago

Score 0

Does this support PCIe 3.0?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #7

3 months ago

Score 0

Found a solution to my XPG SSD not installing... From terminal I ran: sudo rpi-eeprom-config -e Added PCIE_PROBE=1 to the end of the file, saved file, rebooted.

Blue light now on on X1002 and drive recognised by Pi.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #7

3 months ago

Score 0

Whoops. Replied to wrong post. But in answer to your question...Yes, the X1002 supports 3.0, though Pi doesn't officially support more than 2.0. Its a matter of trying your SSD at 3.0 and seeing if its stable.

Personally, I wouldn't risk it.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #12

2 months ago

Score 0

Same here screws will not fit

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #6

3 months ago

Score 0

Samsung PM981A will work with this?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

3 months ago

Score 0

Hi, we haven't tested this SSD, but according to buyers' feedback, the X1002 is compatible with Samsung 970 evo m.e nvme

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #4

3 months ago

Score 0

is the fikwotfsn501 pro its a pci gen3x4 compatable

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

3 months ago

Score 0

Hi, since we can't test all SSD models, we've only tested which SSDs may be incompatible at this time!

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

3 months ago

Score 0

Does X1002 support: Kingston NV2 M.2 NVMe Gen 4 1TB

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

3 months ago

Score 0

Confirmed kingston NV2 not work in X1002.

Usually nvme works 3.3v 2.8A but Kingston NV2 may take more amps.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

3 months ago

Score 0

Kingston NV2 M.2 1TB works fine for me. Not sure what "Gen" is it. Received today X1002 and migrated everything on SSD and made it bootable without an issue. If you are struggled with driver not recognized in "lspci" check if you made everything right in "/boot/configuration.txt" by enabling PCIe port.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #5

3 months ago

Score 0

I also have Kingston NV2 on X1002. No problems

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Harry

3 months ago

Score 0

Permalink