Difference between revisions of "T208-Software"
Jump to navigation
Jump to search
Line 16: | Line 16: | ||
7. Create a python file with the code sample below - For i2c battery voltage & percentage reading | 7. Create a python file with the code sample below - For i2c battery voltage & percentage reading | ||
sudo nano t208bat.py | sudo nano t208bat.py | ||
+ | [[File:Bat.py]] | ||
Revision as of 15:07, 10 August 2020
1. Update software source on Ubuntu, refer to Update software source on Ubuntu
2. To install pip for Python 3 on Ubuntu, run the following commands as root or sudo user in your terminal:
sudo apt-get update sudo apt-get install python-pip
3. To install Jetson GPIO library:
sudo pip install Jetson.GPIO
4. To install I2C dev library
sudo apt-get install libi2c-dev i2c-tools pip install smbus
5. To check what i2c devices connected
sudo i2cdetect -y -r 1 (T208 used the I2C address 0x36)
6. To install Nano editor on Ubuntu
sudo apt-get install nano
7. Create a python file with the code sample below - For i2c battery voltage & percentage reading
sudo nano t208bat.py
Return to T208
Enable comment auto-refresher
Anonymous user #2
Permalink |
Lisa
Anonymous user #1
Permalink |
Lisa