5,154
edits
Changes
T208
,* Improved power-path management avoids batteries discharging when power adapter connected
* Improved Auto power-on reliability
* Adds jumper selection (FON， '''FON'''， Force ON) to disable auto power-off when Jetson Nano is not detected (see note1)* Removed jumper secleciton for '''PLD ''' (Power loss detection), '''PLD ''' is always enabled
* Adds battery Reverse polarity protection circuit & LED indiciators
Note1: If '''FON ''' is enabled (jumper inserted), T208 cannot turn off automatically when Jetson Nano is turned off
===T208 V1.2===
* Intelligent automatic charging and discharging
* On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
* On-board blue LED show the status of power on/off(blue LED for T208 V1.2 and previous version, green LED for T208 V2.0)
'''Intelligent and safe power management'''
==FAQ==
'''Q1: Can I turn ON and use a jetson nano power by the T208 while the T208 is charging?'''
A: Yes, OK, the T208 is support charging while discharing.
'''Q2: Is there any possibility to change the I2C address of the T208 ?'''
A: Sorry, no, not support to change the I2C address of the T208.
'''Q3: What battery is recommended for X708?'''
A:
* Pls use high quality batteries from PANPASONIC, Toshiba, etc.
* Lithium battery need to meet following 2 conditions: 1. Working voltage: 3.6V-3.7V; 2. Maximum voltage after full: 4.2V
* Do not use the battery with built-in protection circuit
[[File:18650_battery_size-2.jpg|400px]]
<!--Add review function! -->