Difference between revisions of "NASPi Lite"
| Line 1: | Line 1: | ||
{{GD Template Impl}} | {{GD Template Impl}} | ||
| − | [[File: | + | [[File:IMG-2385.jpg|thumb|right|NASPi Lite front view]] |
Revision as of 19:02, 27 October 2021
Contents
Overview
Power supply
Power supply: 5Vdc +/-5% , ≥3A (Via Type-C Port of X-C1)
We recommend that you use our 20W 5V 4A Type-C power adapter USB C PSU.
Amazon US: https://www.amazon.com/dp/B09J856PND
Document
- How to Run Raspberry Pi 4 or 3 Off an SSD or Flash Drive: Does the X825/X855 support USB boot
- Tutorial – How to Initialize, Partition and Format a Brand New SSD in Windows: File:Tutorial Initalize New SSD.pdf
- How to set up OpenMediaVault on Raspberry Pi 4
Some Tips
- Properly Mount USB Storage on Raspberry Pi
- Auto Mount an NTFS USB Drive on Raspberry Pi
- Difficulty booting from SSD drive
Features
FAQ
Q0. The SSD cannot start or is very slow
A： If you have a Raspberry Pi 4 and are getting bad speeds transferring data to/from USB3.0 SSDs, read this https://www.raspberrypi.org/forums/viewtopic.php?t=245931
Q1. Will the Alu case affect the WIFI?
A: As our test, 2.4G WIFI AP was usable. But different Raspberry Pi individuals have different degrees of WIFI interference. As well as aluminum alloy case will interfere with pi 4’s WIFI to a certain extent. So it is strongly recommend to use Ethernet or 5G AP. You can refer to video test of 5G WIFI AP: https://youtu.be/LKJVIBQFYXs
Q2: What is the thickness of a 2.5" HDD/SSD that can be accommodated?
A: The thickness of 2.5" HDD/SSD on the market is generally 7mm, 9.5mm, 12.5 and 15mm，You only can choose 7mm or 9.5mm thickness HDD/SSD, NASPi is not compatible with 12.5mm and 15mm thickness 2.5" HDD/SSD.The thickness of 2.5" HDD/SSD should not exceed 9.8mm. In fact, most 2.5" HDD/SSD on the market are only 7mm thick.
Q3: How to find and use the Raspberry Pi 4 5G wifi?
A: Please refer to: Raspberry pi 4 can't find 5ghz wifi
Q7: What is the read/write performance when used as a NAS?
A:The read and write performance is determined by the speed of the Raspberry Pi’s USB 3 bus and SSD. It should be noted that the Raspberry Pi’s USB3 bandwidth is only 3Gbps. Normally, the R/W speed is about 300MB/S.
Q8: Does the NASPi support PoE?
A: According to the customer feedback(based on 2021-05-07-raspios-buster-arm64-lite), the NASPi is OK to use with PoE splitter, but make sure to use high quality PoE splitter, or the power maybe not enough to power the NASPi kit.
Packing List
- 1 x NASPi Lite alu case
- 1 X X823 Shield
- 1 x X-C2 adapter board
- 1 x X823-A3 metal bracket with PWM fan
- Scews pack accessories;
Installation Video
5G AP WIFI Test
Thanks for the Video from ETA Prime.
Collect Feedback
https://geekworm.com/community/forum/topic/33043/solicit-naspi-user-experience-feedback-solutions
Enable comment auto-refresher