X855

X855 V1.3 mSATA SSD Shield

X855 v1.3 mSATA SSD Shield

Overview

In December 2019, the X855 has been updated to X856.

The X855 V1.3 mSATA SSD Shield expansion board provides a complete storage solution for Raspberry Pi 4 Model B, only mSATA interface SDD hard disk is suitable for X855 mSATA SSD extension board; Support up to 1TB mSATA solid-state drive (SSD); With this module, user can build a mobile hard disk with a mSATA SSD for Raspberry Pi 4 Model B.

Features

• Supports upto 1TB mSATA solid-state drive (SSD)
• Ideal storage solution for Raspberry Pi 4 Model B
• USB 3.1 Gen1（ Support USB 3.0） to SATA 6Gb/s Bridge Controller
• Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac
• Bus powered, No additional AC adapter required
• Ultra compact size
• Power supply: USB connection with raspberry pi.
• Additional power may be required only when using a large capacity hard disk
• All use patch processing technology, product quality is more reliable;

Power supply

• Powered by the Raspberry Pi motherboard (only requires extra power when the SSD can't be recognized or low power)

Installation Guide

Matching Metal Case for X855

The case for Raspberry Pi 4 with X855 hasn't released yet, but it will release in the near future.

Packing List

1 x X855 V1.3 Expansion Board

1 x USB 3.1 connector

1 x Install Screws pack (6x M2.5*6 ;4xM2.5*12+6 ; 4x 2.5*5)

Test Data

Test results based on SAMSUNG MSATA 860EVO 250G SSD. We used 3 different software to test it, since this is transferred via USB, it cannot read and write 500M/S.

[x850&x855 performance test 1]

[x850&x855 performance test 2]

[x850&x855 performance test 3]

[x850&x855 performance test 4]

The result of https://jamesachambers.com/raspberry-pi-storage-benchmarks/

FAQ

Q1: Does the X855 support USB boot?

• Please refer to Does the X825/X855 support USB boot

Feedback from user

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #18

52 months ago

Score 0

Does X855 support TRIM command for mSATA drives?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #17

61 months ago

Score 0

So far terrible. Cannot get it to continuosly recognise the msata drive. Have modified the module to enable quirks but still nothing reliable. No idea how to progress right now. Probably will send it back to supplier.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #16

61 months ago

Score 0

Hello,

I now have 6 of these boards. They are connected to rPi4b/4G with the supplied jumper and have Samsung 860 EVO 1TB SSD's in them.

Two appear to work fine, but the other 4 keep logging :

[Thu Oct 31 15:46:02 2019] sd 0:0:0:0: [sda] tag#20 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT [Thu Oct 31 15:46:02 2019] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 00 cb 0c 5e 00 00 08 00

at random intervals in syslog, accompanied by freezes of the system as I/O is blocked.

I've swapped the SSD's around between working and non working cards, but the problem stays with the non-woring one.

I'm trying to build a HPC cluster here, and this is really letting me down.

Orders 2019-1702, 2019-1891, 2019-2032.

The 2 cards from 2019-1702 appear to be working fine.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #15

62 months ago

Score 0

This unit does not work (X855) as advertised!! Please recall this unit and provide one that works, nothing short of this is acceptable!!

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #13

62 months ago

Score 0

Where is the list of GPIO pins it uses? I think it has a conflict with the Fe-Pi audio card.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #11

63 months ago

Score 0

One more problem, even while using a USB 3 cable the drive has to be unplugged and plugged back in several times after reboot to be recognized by the Pi.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #12

63 months ago

Score 0

I see questions about issues with the 855 but no responces from the company? Why?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

63 months ago

Score 0

Hello friend, Sorry for the delay reply, please attach the order number, problem details and contact us at support@geekworm.com for more destails,t hanks! Best regards,

Geekworm Team

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #11

63 months ago

Score 0

I have just received the x855 for the pi 4b and the card works fine with a usb cable but the USB 3.1 Gen 1 usb bridge does not work. is there a fix for this so I can put this unit into a case without having a USB cable hanging out?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

63 months ago

Score 0

Hello sir, Thanks for your feedback. Do you try to not use the WIFI function to have a try? Please attach the order number and emial us at support@geekworm.com to discuss more details, thanks! Best regards,

Geekworm Team

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #9

63 months ago

Score 0

1. I have no idea where and how they could get this result. I only could get 237/204 MB/s (USB 3 male-to-male cable) I have about 200MB/s for USB stick. 2. I could install the system on the drive, but the board kept blinking with LED during upgrade at 17% until I unplugged Pi 3. There is no return on product bought from China (I bought on newegg.com), there is only my comment so far on this product.

4. Yes, SupTronics X850 works without any problem, unfortunatyely you have to use cable.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #10

63 months ago

Score 0

Hi, which SSD do you use for testing ? if the same SSD used, I think you should get the same result.

we used the same circuit and same chipset for both X850 and X850 but adding a shild can to improve RF interference. FYI, if using X850 with Pi4, The 2.4GHz wifi is not stable and cannot connect automatically after booting.

Anyway, thanks for your valuable feedback. we will look into this and we might remove this shield can for next version.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #7

63 months ago

Score 0

I received 2x x855. Connect with usb3 cable does not light anything. Also no recognition of device in w10. Same cable runs other external ssd fine. Samsung T5.

Connecting power to small USB shows leds. But no device recognition neither.

Is it necessary to connect 5v on white plug?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #8

63 months ago

Score 0

Hi, Are you using an USB.30 A to Type-C cable ? or using an USB3.0 A male-to-male cable ? convenient to send a photo of the cable you used to me at feli@suptronics.com ? thanks

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #8

63 months ago

Score 0

sorry. correct mailbox is felix@suptronics.com

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #14

62 months ago

Score 0

In the meantime I got it working. You should write that u definitively need a USB 3 cable with 2x type A connectors to connect to a pc. Second the Pi4 does give power to USB 3 only after boot. U can read that new boot is initializing some chips(like the USB controller) I tried without sdhc card -> no boot up = no Usb3 supply = no lights on x855. So now we just have to wait for network boot and everything will be fine. By the way: Thx for your mailed support

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #4

63 months ago

Score 0

Hi,

today received X855 and equipped it with EVO860 256 GB.

1st Try: I connect via USB2.0 cable to Ubuntu 18.04 PC.

The blue LED on X855 turns on I hear a strange noise from the device (like a bee, comes from the metal box) -> I think this should not be the case Device is listed in lsusb fdisk returns "no media found"

2nd Try: I connect an USB Power cable with the micro USB plug on the X855 and connect via USB2.0 to Ubuntu 18.04 PC

The blue LED on X855 turns *not* on The device is not shown in lsusb

3rd try: I connect X855 on Windows 10 PC with USB2.0 cable

device is not shown

Can you please advise, if something is wrong with the device? I assume, when I connect the adapter with an normal PC and USB cable, I would be able to write and read from the device as a normal USB storage.

Attached output from Ubuntu:

usb-devices T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=03 Dev#= 35 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0855 ProdID=0001 Rev=01.00 S: Manufacturer=SupTronics S: Product=X855 V1.3 S: SerialNumber=201908000003 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

syslog: Aug 27 22:02:17 donald kernel: [ 5936.241300] usb 1-6: new high-speed USB device number 27 using xhci_hcd Aug 27 22:02:18 donald kernel: [ 5937.134699] usb 1-6: New USB device found, idVendor=0855, idProduct=0001 Aug 27 22:02:18 donald kernel: [ 5937.134705] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1 Aug 27 22:02:18 donald kernel: [ 5937.134709] usb 1-6: Product: X855 V1.3 Aug 27 22:02:18 donald kernel: [ 5937.134713] usb 1-6: Manufacturer: SupTronics Aug 27 22:02:18 donald kernel: [ 5937.134717] usb 1-6: SerialNumber: 201908000003 Aug 27 22:02:18 donald kernel: [ 5937.135762] usb-storage 1-6:1.0: USB Mass Storage device detected Aug 27 22:02:18 donald kernel: [ 5937.136070] scsi host7: usb-storage 1-6:1.0 Aug 27 22:02:19 donald kernel: [ 5938.158027] scsi 7:0:0:0: Direct-Access SupTroni X855 V1.3 0 PQ: 0 ANSI: 6 Aug 27 22:02:19 donald kernel: [ 5938.158804] sd 7:0:0:0: Attached scsi generic sg8 type 0 Aug 27 22:02:19 donald kernel: [ 5938.159946] sd 7:0:0:0: [sdi] Attached SCSI removable disk -> there is no mapping to e.g. sdi1 :-(

lsblk does not list sdi

fdisk:

no medium found

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #5

63 months ago

Score 0

The problems with the X855 remembers me to the desaster with the first versions of the X850. Up to hardware version 1.3 they used the JMS578. This controller is known to be a piece of junk. From hardware revision 3.0 they used ASM1153E. Everything was fine then.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #5

63 months ago

Score 0

At least you should test the connection to the host system with a USB3-cable (its blue colored). Make sure to plug into a USB3-port.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #6

63 months ago

Score 0

Hi, we receive your mail, and reply you via mail.

Regards,

Geekworm Team

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

63 months ago

Score 0

Finally, I got one in my hands. My impressions: I run it with a SAMSUNG 860 EVO mSATA 250GB. I did this already with a X850 (via blue cable). On X850 everything was fine. Got a score of 9354 with benchmark-tool from https://jame...-benchmarks/ After connection to the new X855 the device did not start. After replace of jumper with blue cable, the device started. Did an apt-update and apt-upgrade. Device run very very hot. In order to prevent damage, I disconnect power supply. Device did not start after repowering. Unplugged the X855, reconnected to X850. Everything was fine then.

Summarize: X855 may be buggy?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

64 months ago

Score 0

What is the extra power specificacions ?

What cases would need, extra power ?

Tnks... xD

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

64 months ago

Score 0

Why is there a 1TB limit?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

64 months ago

Score 0

Hello friend, On theory, it isd ok to use other capacity big than 1tb. We do not test it, maybe you can do a test, thanks! Best regards,

Geekworm

Permalink