X303
Contents
Overview
X303 is a Gigabit Ethernet expansion board with USB HUB specially designed for Raspberry Pi Zero 2 W / Pi Zero / Zero W / Zero WH.
It equipped with a Gigabit Ethernet, 3 standard USB-A 2.0 ports, and a USB Type C to power.
The USB-A port can be used to connect external devices such as mouse, keyboard etc.
Note:
- The Raspberry Pi board, power adapter are not included in the packing list.
- Raspberry pi micro OTG port cannot be used as it is occupied by USB HUB
Features
- Onboard USB2.0 to 10/100/1000M Gigabit Ethernet
- Upgrade to fast, wired Ethernet speeds via USB
- Improve speed and reliability over faster networks
- Practical speeds of 200300Mbps on a Gigabit network. Supports auto MDIX
- Powered by the Realtek RTL8153 chipset that provides better performance, and stability, than most WiFi networks
- Onboard three USB 2.0 Ports - No more external USB hub
- Gain 3 USB2.0, downstream ports which offer HighSpeed (480Mbps), FullSpeed (12Mbps), and LowSpeed (1.5Mbps)
- Powers the Raspberry Pi via Pogo Pins - no wiring & soldering required
Port & Connectors
- 1 x Gigabit Ethernet to provides high-speed transmission
- 3 x USB-A 2.0 Port to support external USB device
- 1 x UPS-C Port to power in
How to Power
Power via USB C 5V In port of X303
Power supply requirement: 5Vdc +/-5% , ≥3A
How to Cool
Recommend to use with Geekworm C296 aluminum heatsink for Raspberry Pi Zero 2 W.
C296 also compatible with raspberry pi zero w by using thermal pads of different thicknesses, thermal pads for raspberry pi zero w is not included.
Packing List
- 1 x X303 V1.1 Expansion Shield
- 4 x CM2.5*5mm Screws
Enable comment auto-refresher