X825-C8

X825-C8 Front

X825-C8 Back

X825-C8 Inner

X825-C8 Dimensions

X825-C8 Packing List

Overview

This is a new X825-C8 metal case with power control switch and mute cooling fan which is designed for Raspberry Pi 4 Model B with the latest X825 V2.0 2.5 inch SATA HDD/SSD storage board, it is a perfect choice for X825 V2.0 SSD/HDD storage board user. Recommend to use the X735 safe shutdown&Cooling fan board over Raspberry Pi.

Note:

1. The X825-C8 only support the X825 V2.0 version, does not support X825 V1.5 version.
2. The WiFi or Bluetooth signal will be affected if use the metal case, we advice that you use ethernet network or 5.8G wifi AP to replace the 2.4G wifi to test.

Features

• Power switch with beautiful LED indicator to control the power of X825 V2.0 with X735 and the Raspberry Pi 4 Model B;
• Support super mute cooling fan, round cooling holes on both side of the case, provides good heat dissipation;
• Support Max 9.5MM thickness 2.5 inch SATA HDD/SSD(Do not support 15mm thickness 2.5 inch SATA HDD/SSD)
• Reserved Side Slot(Interface) for GPIO/FFC Cable
• Reserved Slot for X735 DC power Port and X735 microusb and Type-C port
• High quality metal material with surface galvanized process;
• Support super mute dc 5v cooling fan;

4010 Fan

• Bearing: Sleeve
• Voltage: 5V DC
• Working Current: 0.06A
• Noise Level: 23.1dBA-26.1dBA
• Speed: 4200 RPM
• Dimensions:40x40x10mm
• Cable length: 11cm/4.33inch
• Net Weight:13g
• Temperature range: -10+80°C

For Use With

• X825 V2.0 Version 2.5" SATA HDD/SSD Shield (Not Support X825 V1.5 Version)

Packing List

• 1 x X825-C8 Metal Case for X825 V2.0
• 1 x Power Control Switch
• 1 x 4010 Cooling Fan (Noise: 18dB)(with 4 pieces of screws)

User Manual

Installation Video for X825 V2.0

https://youtu.be/JxUNhIxXgj4

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #6

28 months ago

Score 0

吉安666

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #5

35 months ago

Score 0

will this case work with x829?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

35 months ago

Score 0

Hello，

X825-C8 not support X829.

The matching case is x829-C1, but it has been discontinued.

Please note that there is no case for x829 board now！

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #4

36 months ago

Score 0

is there a way to safely remove and insert the micro SD card through the provided X825 V2.0 case Micro SD card slot?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

36 months ago

Score 0

Hi， you can use tweezers as an auxiliary tool

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

36 months ago

Score 0

Well I like this case and am using the option 1 configuration. My issue is when I want to shut it down the OS does not turn off the rest of the hardware and I have to unplug it to make the on switch work. I am running Kali on it if that makes any difference.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

36 months ago

Score 0

Hi，Does the switch not work? Please check the wiring of the switch is correct first.please refer PSW19

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

38 months ago

Score 0

Bought this a while back is there a way to have it Auto Power On after a loss of power?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

38 months ago

Score 0

Hi，For Auto Power On function, please refer to X735 V2.5 Hardware；X825-C8 just metal case，no Auto Power On function.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

40 months ago

Score 0

Hello, Why do hat support raspberry pi 3 ie the x735. And the board it sits on, which is this supports only pi 4.

I am lost in this act of finding a suitable case board and hat that goes with pi 3 and 4

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

40 months ago

Score 0

Hello, Because the interface is different； for Pi4+2.5 inch SATA SSD: ①x825 V2.0 Storage expansion board + x735 Power management board + X825-C8 metal case.

for Pi3+2.5 inch SATA SSD: x820 Storage expansion board + x735 Power management board + X820 metal case.

For more matching suits,please refer hereGEEKWORM NAS Family

Permalink