Main public logs

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 23:42, 18 September 2023 5.20.159.89 talk performed unknown action "comments/add" on X728 (It would be a perfect UPS if there was some sort of thermal monitoring present (mainly for safety: stop charging and low and high temp). Please consider adding temperature sensors for batteries in your next board revision.)
• 11:19, 28 August 2023 Walker talk contribs performed unknown action "comments/add" on X728 (Hello, the maximum support of x728 is 5V, and the voltage of 12V cannot be used)
• 03:42, 28 August 2023 84.52.228.93 talk performed unknown action "comments/add" on X728 (can the unit handle 12V input on the USB C port?)
• 16:20, 11 August 2023 Walker talk contribs performed unknown action "comments/add" on X728 (Hello, X728 we have designed a shell, you can buy it directly: https://www.aliexpress.com/item/3256804044629965.html?gatewayAdapt=4itemAdapt ''' ''')
• 00:31, 11 August 2023 73.240.5.34 talk performed unknown action "comments/add" on X728 (Hello, another user who wishes to design a custom enclosure, who requests a STEP model file to reference the dimensions and component placement.)
• 15:29, 19 May 2023 Walker talk contribs performed unknown action "comments/add" on X728 (Hello, in the FAQ on the X728 WIKI page, it is written that we suggest to use the NCR18650B from Panasonic. We have read the battery specifications of 18650 LiFePO4 batteries, and it should be usable. If this LiFePO4 batteries are safer, it is ok It is used, but it needs to be noted that when using batteries and power supply, be careful)
• 03:03, 13 May 2023 90.167.51.168 talk performed unknown action "comments/add" on X728 (Hello again, Previous 18650 LiFePO4 comment extended: For X708 model there is the Key Features (wiki-geekworm-com/X708#Features) saying that it "supports 3.7V 18650 lithium battery and 3.7V lithium polymer battery. No capacity limit, only request 3.7V lithium battery". However, on this wiki I couldn't find such information for X728 regarding the kind of batteries supported and the voltage. I just found the recommendation for Panasonic NCR18650B batteries which have 3.6v. I discovered tha...)
• 14:52, 11 May 2023 Walker talk contribs performed unknown action "comments/add" on X728 (Hello, it is possible in theory, I suggest you take a look at our SAFETY INSTRUCTIONS AND WARNINGS on X728, there are suggestions about using batteries, precautions, and battery recommendations for X728 boards)
• 05:23, 8 May 2023 88.21.133.154 talk performed unknown action "comments/add" on X728 (Hello! Can I use 18650 LiFePO4 3.2V 1800mAh? Thanks!)
• 16:12, 31 March 2023 Cindy talk contribs performed unknown action "comments/add" on X728 (Hi,please provide the order number and photos of the burnt part to contact us at support@geekworm.com, thanks!)
• 16:08, 31 March 2023 Cindy talk contribs performed unknown action "comments/add" on X728 (Hi, we have the guide about how to use the buzzer, please refer to X728-Software. Any more issue, please contact us at support@geekworm.com.)
• 18:56, 26 March 2023 91.22.77.68 talk performed unknown action "comments/add" on X728 (How can I deactivate the buzzer? I use a Homematic radio adapter (). Each time there is a service or error message, the buzzer beeps. I really need to deactivate the buzzer. Please advise!)
• 23:09, 16 March 2023 131.225.56.39 talk performed unknown action "comments/add" on X728 (The WSP4407 next to the RPi connector burned out. The unit is still functional. Do you know what could be causing this?)
• 11:19, 29 January 2023 Lisa talk contribs performed unknown action "comments/delete" on X728
• 07:10, 27 January 2023 20.254.152.175 talk performed unknown action "comments/add" on X728 (1) Tags: Mobile edit Mobile web edit
• 00:56, 26 December 2022 37.19.221.52 talk performed unknown action "comments/add" on X728 (Oh well, strike 2. The code is all there, you just may have to clean up the formatting.)
• 00:54, 26 December 2022 37.19.221.52 talk performed unknown action "comments/add" on X728 (Sorry, the code did not paste nicely when copied directly from Linux. I'll try again with a copy from windows. #!/usr/bin/env python import RPi.GPIO as GPIO import time import os import datetime import struct import smbus import sys #################################### # Start Config #################################### SHUTDOWN_TRIGGER = "All" # (AC Power,Capacity,Voltage,All) - determines what settings will trigger a shutdown. AC_LOSS_WAIT_MINUTES = 15 # Number of...)
• 00:44, 26 December 2022 37.19.221.52 talk performed unknown action "comments/add" on X728 (As others have mentioned, I was finding that the provided scripts were immediately shutting down the x728 but were not doing a safe shutdown of the raspberry pi. The power was immediately being cut to the raspberry pi resulting in a crash. See the last command for an example pi@raspberrypi:~ $ last ... reboot system boot 5.15.76-v7l+ Wed Dec 31 18:00 - 10:22 (19348+16:22) pi pts/0 192.168.68.70 Thu Dec 22 09:48 - crash (-19348+15:48) pi tty7 :0...)
• 16:52, 6 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Yes，you can refer V2.1 script *[https://wiki.geekworm.com/File:X728_SAFE_SHUTDOWN.png])
• 16:49, 6 December 2022 Lisa talk contribs performed unknown action "comments/delete" on X728
• 16:48, 6 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Yes，you can refer V2.1 scriptFile:X728 SAFE SHUTDOWN.png)
• 16:46, 6 December 2022 Lisa talk contribs performed unknown action "comments/delete" on X728
• 16:45, 6 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Yes，you can refer V2.1 scriptX728 SAFE SHUTDOWN.png)
• 15:59, 6 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (please refer toX728-hardware#Pins and GPIO used)
• 19:22, 5 December 2022 95.223.75.133 talk performed unknown action "comments/add" on X728 (Mit was sind die GPIO5, 6 und 13 belegt und wie lassen sich diese als normal weiter nutzen?)
• 18:44, 5 December 2022 79.61.249.53 talk performed unknown action "comments/add" on X728 (is it possible to safe shutdown Raspberry just after AC power OFF and NOT when batteries are low charge? how to do?)
• 21:00, 17 November 2022 161.69.108.11 talk performed unknown action "comments/add" on X728 (Hello Lisa. Your documentation is wrong. Is pin 1 and 3 with a single button. Thanks)
• 10:38, 17 November 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi，The x728 supports the connection of a 4pin momentary switch, but the safe shutdown function requires an installation script to be realized. Please refer to here for the switch：X728-hardware#Connector for External Power Switch)
• 01:50, 17 November 2022 87.217.220.23 talk performed unknown action "comments/add" on X728 (Can you share wire connection of switch to button? I want to connect another button with C-NC-NO. With the small blue button it works to restart with 3 seconds press. But I have tried all combinations with a button in switch and not works to shutdown and power on. Thanks)
• 16:57, 31 August 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (If the voltage there still present, then the X728 cannot implement auto-on. we can change the script or a resistor to match your applicaiton but will need to know the timing from 5V to 0V after key off. for this new verison, we changed the MCU and auto-on shoud be more reliable as long as the timing is confirmed. <gallery>X728-out on.png|for X728 V2.2 auto-on</gallery>)
• 16:57, 31 August 2022 Lisa talk contribs performed unknown action "comments/delete" on X728
• 16:54, 31 August 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (If the voltage there still present, then the X728 cannot implement auto-on. we can change the script or a resistor to match your applicaiton but will need to know the timing from 5V to 0V after key off. for this new verison, we changed the MCU and auto-on shoud be more reliable as long as the timing is confirmed. <gallery>X728-out on.png|for X728 V2.2 out on</gallery>)
• 16:50, 31 August 2022 Lisa talk contribs performed unknown action "comments/delete" on X728
• 16:50, 31 August 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (If the voltage there still present, then the X728 cannot implement auto-on. we can change the script or a resistor to match your applicaiton but will need to know the timing from 5V to 0V after key off. for this new verison, we changed the MCU and auto-on shoud be more reliable as long as the timing is confirmed. X728-out on.png)
• 15:44, 27 August 2022 126.255.64.184 talk performed unknown action "comments/add" on X728 (Thank you for your prompt reply. I understood the content. However, since we were considering and implementing an automatic startup and shutdown of the Raspberry Pi linked to the motorcycle key (main power), it is difficult to unplug the power supply. Therefore, I gave up on 1). We believe that a set of 1) and 2) will be effective, but (2) alone. So, after detecting AC off, I waited 15 seconds before shutting down the system. After shutdown, I waited 30 seconds to turn AC on, but there was...)
• 15:28, 25 August 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hello， This should be related to discharging time of your power adapter. once removed the power supply from AC outlet, there is still voltage output but will reduce slowly. in this perid, the X728 can detect the voltage so it cannot turn on automatically. You can try 1) Remove the power supply and wait for a longer time (normally 10~15 seconds) then plug in again. 2) Change the script and adjust the time to be longer to shut down after AC power loss. the time is subject to dicharging time...)
• 07:47, 25 August 2022 39.110.199.102 talk performed unknown action "comments/add" on X728 (Hello. I have been using multiple versions of v1.0v -> v1.3 -> v2.0 -> v2.2. I am currently using v2.2. Thanks for a great product. I have ASD enabled. I have CHG enabled. In this state ...Power supply from AC ON -> Startup. This is OK. Power supply from AC is turned off → shutdown by detection in the script. This is also OK. However... The next timing, "power supply ON from AC -> startup" does not go well. The red LED on the board lights up for a moment. It does not turn on automatically....)
• 09:53, 11 May 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi， ①Please refer X728-Software#FAQ--Raspberry Pi Tutorial: How to Use a Buzzer ②AC FALL(AC Power Loss LED)----When AC power supply is not connected or power supply fails, the red indicator light is always on. If connected to AC power, the red indicator will not light up.)
• 09:50, 11 May 2022 Lisa talk contribs performed unknown action "comments/delete" on X728
• 09:50, 11 May 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi， ①Please refer to FAQ information：[Raspberry Pi Tutorial: How to Use a Buzzer] ②AC FALL(AC Power Loss LED)----When AC power supply is not connected or power supply fails, the red indicator light is always on. If connected to AC power, the red indicator will not light up.)
• 16:28, 10 May 2022 217.91.14.75 talk performed unknown action "comments/add" on X728 (Hello, I want the buzzer to work when AC power fails, but buzzer should not go on indefinitely, I want to use a button to switch off the buzzer sound. Which pins i can use to execute this functionality ?)
• 15:33, 10 May 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hello， Yes， you can block buzzer in the script.)
• 22:17, 9 May 2022 217.91.14.75 talk performed unknown action "comments/add" on X728 (Hello, Is it possible to stop the buzzer using a button (Hardware interruption)?If yes, How can it be achieved . Thanks)
• 10:51, 27 April 2022 Harry talk contribs performed unknown action "comments/add" on X728 (Hi, check the x728pld.py file, try to comment out the following python code: GPIO.output(BUZZER_PIN, 1) time.sleep(0.1) GPIO.output(BUZZER_PIN, 0) time.sleep(0.1))
• 04:50, 27 April 2022 189.217.0.185 talk performed unknown action "comments/add" on X728 (by the way, is there a sequence we have to follow to unassmble the hat to avoid damagin itsel or the raspberry?)
• 04:26, 27 April 2022 189.217.0.185 talk performed unknown action "comments/add" on X728 (Finally got it working, are there any other commands that could be useful? is there a way to disable te buzzer?)
• 18:11, 24 April 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi，Miguel ①Please do not use USB Type-C and DC Jack power to X728 at the same time. ②When the input voltage is lower than about 4.2~4.5, gradually switch to battery power supply)
• 15:17, 24 April 2022 189.202.90.169 talk performed unknown action "comments/add" on X728 (Good day, Can both input power supplies (USB Type-C and DC Jack) be used at the same time? What would happen if one (or both) of the input's voltage or current drops below the specification? I believe in the event where both the first, and second power supply inputs requirements fail, the AC FAIL LED will light up and the board will now use it's 18650 batteries. Is it safe for the board to receive an input below the requirements? e.g. solar panels outputting 0V at night, or below 5V and be...) Tags: Mobile edit Mobile web edit
• 12:12, 22 April 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi， Short the AON pin； after shutting down, the Raspberry Pi will not restart automatically if the power supply is not replugged in or unplugged. But AON function detection is more sensitive, if it detects a voltage, it will automatically turn on.and we will improve this feature in the future.Thanks~)
• 10:58, 22 April 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi， The size of the button top batteries may be a bit large. you can use flat top batteries. please refer to：X728-hardware#18650 battery dimension;Please buy the correct size battery.)