Main public logs

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

02:21, 6 January 2023 81.14.205.62 talk performed unknown action "comments/add" on X728-hardware (I noticed, when USB peripherals are connected to the raspberry, the AC FAIL LED flashes together with the battery indicator. Any suggestions why and if this is harmful? In my case its a NFC card reader, which should not draw that much power. Same happens with an USB Relay.)
17:55, 27 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Yes, you can use it.)
00:55, 22 December 2022 131.225.56.39 talk performed unknown action "comments/add" on X728-hardware (can I power through 11 5VIn XH2.54?)
21:41, 8 December 2022 82.75.181.168 talk performed unknown action "comments/add" on X728-hardware (The UPS is acting strange. The 4 led's indicating the loadlevel has stopped, they stay out. Domoticz (raspberry pi) shows a loadlevel of 140% !!! The battery voltage shows 4,66V. I immidiately performed a shutdown and detached the UPS. An external voltmeter shows indeed 6.6V The ups has become to dangerous to use. Is there any chance to ever get it in proper acting again?)
18:24, 7 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Thnaks for your feedback.there is no smart momentary switch like that.but you can see the indicator light on X728 ups board.)
11:08, 7 December 2022 100.0.115.192 talk performed unknown action "comments/add" on X728-hardware (I paired this with the X728-C1 Case which has a momentary switch with blue LED ring. Any chance the button LED is connected to GPIO pins to control it (turn on, off, flash, etc). Next update would be a good idea to have it be an RGB LED to give unlimited feedback to user. (red means error, green all success, etc).)
10:48, 7 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (The operating system is Raspberry PI OS, not UPS. If you upgrade it, reinstall the UPS script to test.)
18:38, 6 December 2022 82.75.181.168 talk performed unknown action "comments/add" on X728-hardware (Hi Lisa, can I upgrade the OS, I mean is there upgradable software on the UPS? Where can I find it?)
16:55, 6 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi,1/Please unplug the batteries, leave it for a few minutes and then test again; 2/Have you upgraded the OS? If you have upgraded the OS, it is recommended to UNINTALL first and then reinstall.)
23:51, 5 December 2022 82.75.181.168 talk performed unknown action "comments/add" on X728-hardware (hi, I bought a x728 V1.2 exactly 24 months ago. It worked fine until I decided to make a copy of my sc-card and so shut down my Raspberri Pi. When powering up again, the Pi started a few seconds and then the power got cut by the UPS. all led's stoppped blinking exept for the charging ones. I pressed the switch shortly and the power coma back on, for a few seconds and the power got cut again. Long story short: I cannot get the UPS started again, why?)
09:53, 27 September 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi，You don't have to use the batteries we recommend, but please make sure to use genuine, high-quality batteries. And note the X728's requirements for battery size--[18650 battery dimension] . Thank you.)
12:42, 26 September 2022 186.96.100.60 talk performed unknown action "comments/add" on X728-hardware (Hi, I'm unable to find the recommended battery Panasonic NCR18650B, as a replacement, the seller recommends the Panasonic NCR18650GA, 3450mAh battery. Is it ok to use that model? Thank you very much!)
11:04, 20 May 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi， Please pay attention to the size requirements of the 18650 battery（Max.65.3mm length）, it is recommended that you buy flat batteries.)
15:05, 19 May 2022 152.115.72.36 talk performed unknown action "comments/add" on X728-hardware (Hello, the batteries referenced in user manual (Panasonic NCR18650B) don't fit in the the X728 v2.1, are there any other batteries that would definitely fit in the UPS?)
09:54, 11 May 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Yes, you can use X708 UPS HAT with X728-A2 2-cell battery holder)
23:04, 10 May 2022 39.109.159.9 talk performed unknown action "comments/add" on X728-hardware (can x728-a2 be used together with x708?)
10:23, 23 March 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi， You can also refer to this link for X728 v2.0/2.1/2.2 versions；http://www.suptronics.com/miniPCkits/x728_v2.2-software.html)
01:57, 18 March 2022 174.32.160.19 talk performed unknown action "comments/add" on X728-hardware (I have a V 2.1)
01:56, 18 March 2022 174.32.160.19 talk performed unknown action "comments/add" on X728-hardware (Hi, RPi4/4GB, all updates & upgrades; cloned and installed files from Git this morning (20220317). Blue button only works to force shutdown (>8 seconds press), and when I run the battery monitor script (I moved it to a "Scripts" directory in my Pi/Home), I get this error: pi@raspberrypi:~ $ sudo python /home/pi/Scripts/x728bat.py /home/pi/Scripts/x728bat.py:14: RuntimeWarning: This channel is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings. GPIO.setup(G...)
16:59, 2 March 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hello， UPS output : 5.1V ±5% Max 6A Depending on the specific usage scenario, the output current will fluctuate.)
14:56, 2 March 2022 84.131.156.70 talk performed unknown action "comments/add" on X728-hardware (I'd also like to know more about the behavior of the 5V output (pins 2, 4). How much current can be drawn at stable 5V operation? Does it have a short-circuit detection. I would like to use this port to power a GoPro camera.)
18:47, 22 February 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hello， X728 --Automatic safe shutdown when battery low (voltage <3.0V)； If you are worried about data loss, we recommend that you make a backup.)
03:46, 19 February 2022 212.205.238.85 talk performed unknown action "comments/add" on X728-hardware (Hello, How safe it is the code for safe shutdown if volt is under 3.00? I am having a web server and i am worry of losing data or corrupt data. I am using sudo sync && sudo shutdown -h now. The puthon code is using gpio for shut down.) Tags: Mobile edit Mobile web edit
10:38, 17 February 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hello， Yes, V2.0 / V2.1 version--the battery polarity directions are the same. Please install the battery according to the direction printed on the board. The installation manual is the previous version V1.2 / V1.3 Best regards)
03:50, 17 February 2022 81.5.230.149 talk performed unknown action "comments/add" on X728-hardware (Hello, just got the X728 Board, V2.1 is printed on the side looking to the raspberry when installed. The direction of polarity in battery compartments are facing in the same direction. In the installation manual the batteries are facing in contrary directions, just to be sure and not to destroy anything: the v2.1 wants the polarity of the batteries like its printed: same direction, right? Thanks in advance and regards, Max)
04:15, 15 February 2022 2.86.128.107 talk performed unknown action "comments/add" on X728-hardware (Hi Lisa, yes the AUTO ON is shorted, as i need to power on when the power returned. I will test first power adaptor but i think i have test it without any luck. Any another idea? I am writing a python code with all functions and email alert if power is OFF - ON - %. I will post it on github.)
18:15, 14 February 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Please remove the power adapter directly instead of the power cable to test.)
18:00, 14 February 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hello， This may happen if [Auto ON] is shorted. Please check whether the [Auto ON] is shorted.)
04:41, 13 February 2022 62.74.22.124 talk performed unknown action "comments/add" on X728-hardware (Hi, I am having v2.0. My problem is that every time i use "x728off" command to shutdown my Pi and then remove the power cable from the board, it is boot up. Any idea how to fix this?)
18:03, 22 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi， Yes, you can use batteries with a protection circuit, but please pay attention to the battery size requirements--X728-hardware#18650 battery dimension. However, many batteries with protection circuits are too large to be installed. To avoid this problem, we require the use of batteries without protection circuits. And please use quality 18650 batteries, inferior batteries will damage the ups board.)
05:37, 22 January 2022 186.118.201.192 talk performed unknown action "comments/add" on X728-hardware (Is it possible to use 18650 batteries with a protection circuit integrated? because it seems I can't find them without it)
10:22, 21 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hello You mean that RPI is not powered off, but x728 is still running? This doesn't happen because the Raspberry Pi is powered off via the x728.)
20:36, 19 January 2022 82.193.67.129 talk performed unknown action "comments/add" on X728-hardware (#28 - Thanks for your reply, but regarding your "2.[when the external power is restored while RPi is still under Battery power]--The external power supply powers both the battery and Raspberry Pi." - if RPi is still under battery power after shutdown (but not Poweroff), we need to issue a Bootup via GPIO5. How can we configure X728 to do this after AC is restored (without the button)? Or jouu mean that RPI is powered down just after Shutdown? Thanks in advance.)
10:18, 18 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi, 1.The new version cancels the ASD(Auto shutdown) jumper, you can achieve a safe shutdown through software.please referX728-Software. 2.[when the external power is restored while RPi is still under Battery power]--The external power supply powers both the battery and Raspberry Pi.)
01:39, 18 January 2022 82.193.67.129 talk performed unknown action "comments/add" on X728-hardware (Hi, could you please advise about the ability of X728 to operate in unattended mode (without button)? I see it has an Auto Shutdown, but what about Auto Bootup in situation, when the external power is restored while RPi is still under Battery power? Thanks in advance & best regards.)
10:03, 17 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi， Please refer to the two pictures at the top right of X728. Thanks~)
17:45, 16 January 2022 95.90.238.7 talk performed unknown action "comments/add" on X728-hardware (Hi could you update the pictures to show the newest X728 v2.1 model? Thank you Best regards)
10:06, 10 January 2022 Harry talk contribs performed unknown action "comments/add" on X728-hardware (Hi, Thanks. Refer to X728-hardware#PCB_Layout)
09:25, 10 January 2022 193.36.225.213 talk performed unknown action "comments/add" on X728-hardware (Do you happen to have 3D models available for your boards (STP or STEP files)? I am busy developing a main board, where I plan to use your X728 as well as another board of yours, in my design. Having the 3D models means I can produce a high quality 3D rendering of my completed board, with your board located on it too!)
17:45, 15 December 2021 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hello, We are sorry for that, and x728 does not support adjusting the brightness of the LED light, you can cover it with tape. Best regards Geekworm)
16:27, 15 December 2021 217.118.78.86 talk performed unknown action "comments/add" on X728-hardware (Hi! How to decrease brightness of four Fuel gauge LEDs in my X728 v1.3? They burns my eyes.)
00:50, 27 August 2021 97.126.34.24 talk performed unknown action "comments/add" on X728-hardware (Does anyone among the user group have an insight on this. I emailed the Geekworm support account, and their response was completely unhelpful.)
14:19, 26 August 2021 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi， please refer herePH2.0 Conector Specification； and we also replied to your email. Regards)
07:38, 26 August 2021 97.126.34.24 talk performed unknown action "comments/add" on X728-hardware (I'm trying to connect a momentary switch to the External Power Switch, but I'm not sure how to connect the wires. I have an image of the wiring guidance for the switch itself. Is there a way I can email it to you for guidance?)
15:34, 17 August 2021 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi，If you want to return and replace V2.0, please email us. Please tell us your order number；thanks 【support@geekworm.com】)
13:31, 17 August 2021 188.73.194.161 talk performed unknown action "comments/add" on X728-hardware (Hi Lisa, i tried twice your simple fix but still all led flashing. Tried different chargers and still no luck. I am sure the hardware is malfunction. I can't use it in my project and the horst is that i spent 105$ to buy it(x728, x728-A1, x728-A2, x857).)
12:44, 17 August 2021 94.64.235.66 talk performed unknown action "comments/add" on X728-hardware (Hi Lisa, can i return the hardware and get v2.0? I bought it last month from aliexpress official store.) Tags: Mobile edit Mobile web edit
10:07, 17 August 2021 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi，Unplug the power, reinstall the batteries, no need to reinstall the software.)
22:26, 16 August 2021 188.73.194.161 talk performed unknown action "comments/add" on X728-hardware (Hi Lisa, reinstall only batteries or you mean and the software? Can i return the hardware and get v2.0? I have it for 1month and never managed to make it work fine.) Tags: Mobile edit Mobile web edit
19:13, 16 August 2021 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi，Please take out the batteries, unplug the power supply, and reinstall it. Sorry for the inconvenience, we have improved this problem in V2.0)