X883
Overview
This is an ultra-compact raspberry pi 4 dual 2.5 inch sata hdd/ssd storage board X883, it allows two 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds.
The built-in LED light indicates the reading or writing status – no more guesswork again.
Features
- Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield
- Supports dual 2.5 SATA HDDs/SSDs working at the same time
- Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying
- Function to power the RPI via XH2.54 only needing a single power supply
- Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers
- Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac
- LED blue indicator indicates each drive status
- Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
- Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
- Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)
Power Supply Requirement
- Power supply: 5Vdc +/-5% , ≥4A
- Ports & Connectors: DC jack - 5.5x2.5mm
Pls use high quality power adapter, or the HDD/SSD may cannot be recognized.
Packing List
- 1 x X883 Shield (Support Dual 2.5 inch SATA HDD/SSD)
- 1 x Carrier Board (To mount raspberry pi on X883)
- 1 x USB 3-D Connector
- 1 x 2-Pin Power Connection Wire
- 6 x Spacer F/F M2.5 x 14mm
- 2 x Spacer M/F M2.5 x 14+5mm
- 12 x Screw M2.5 x5mm
- 4 x Screw M3 x 6mm
Enable comment auto-refresher
Anonymous user #11
Permalink |
Harry
Anonymous user #10
Permalink |
Lisa
Anonymous user #9
Permalink |
Lisa
Anonymous user #8
Permalink |
Lisa
Anonymous user #7
Permalink |
Lisa
Anonymous user #6
Permalink |
Lisa
Anonymous user #5
Permalink |
Lisa
Anonymous user #4
Permalink |
Lisa
Anonymous user #3
Permalink |
Lisa
Anonymous user #1
Permalink |
Anonymous user #2
Anonymous user #1
Lisa