Main public logs

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

15:14, 16 June 2021 Lisa talk contribs performed unknown action "comments/add" on X728 (Hello, Sorry for the late reply. please follow the steps to test if the X728 issue: a:Take the X728 off from the Raspberry Pi, remove all the batteries, power supply, and all jumper caps. Then connect the battery or power supply, press the blue power button on X728, the blue LED should be on, and then press and hold the power button for more than 8 seconds, the blue LED should be off.(These steps indicate that the X728 has no issue.) b:Please check and confirm if other device occupy the GPI...)
14:52, 16 June 2021 Lisa talk contribs performed unknown action "comments/add" on X728 (Hello, Sorry for the late reply. for the automatically shuts down： 1/Remove all jumper cap, 2/Remove all 18650 battery 3/Place 18650 battery again and wait a few seconds before testing. 4/Please check and confirm if other device occupy the GPIO with X728. I noticed your steps, please do not supply power through the USB-C port of the RPi. If your x728 is V1.2 version； Please check if enable the ASD function (shorted the ASD header), if you enable the ASD function, please make sure your opera...)
11:44, 16 June 2021 Lisa talk contribs performed unknown action "comments/add" on X728 (Hello，no limit. If you want to use more batteries, we recommend X708-A1, which supports 18650 batteries/8pcs ；please refer here：https://wiki.geekworm.com/X708-A1#/media/File:X708-A1-05.jpg)
11:38, 16 June 2021 Lisa talk contribs performed unknown action "comments/add" on X728 (Hello，We do not recommend this，and we have not tested like that. Please refer the software of X728 V1.3；regards)
19:44, 15 June 2021 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi,please refer here:https://wiki.geekworm.com/X728#/media/File:X728-IMG-7976-%E8%B7%B3%E7%BA%BF%E8%AF%B4%E6%98%8E.jpg)
19:44, 15 June 2021 Lisa talk contribs performed unknown action "comments/delete" on X728
19:37, 15 June 2021 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi,please refer here:https://wiki.geekworm.com/X728#/media/File:IMG_9490-Interface.jpg)
23:10, 11 June 2021 45.232.93.190 talk performed unknown action "comments/add" on X728 (Hello, Can I use gpio6 directly in gpio13 to shut it down immediately in case of AC failure? using the script x728pwr.sh ?? I have a x728 v1.3 greetings)
18:48, 5 June 2021 134.202.32.28 talk performed unknown action "comments/add" on X728 (How to enable 'AUTO POWER ON' or 'AUTO ON' function?)
07:35, 1 June 2021 98.45.0.80 talk performed unknown action "comments/add" on X728 (Is there a maximum number of A2 battery packs that can be chained together?)
08:54, 21 May 2021 142.179.5.186 talk performed unknown action "comments/add" on X728 (Thank you! You save my time!)
15:53, 11 May 2021 Cindy talk contribs performed unknown action "comments/add" on X728 (Hi friend, Sorry for the delay reply, for the X728 V1.3 version, ASD function by hardware has been removed, it need to control by software to implement the fucntion.)
01:08, 10 May 2021 2.36.82.2 talk performed unknown action "comments/add" on X728 (same problem here, this UPS is very buggy, i consider returning to the seller...)
01:06, 10 May 2021 2.36.82.2 talk performed unknown action "comments/add" on X728 (Assuming everything is installed correctly: When i call x728off nothing happens... maintenance@solarstream:~ $ x728off X728 Shutting down... maintenance@solarstream:~ $ if i bash directly the script x728softsd.sh i get: maintenance@solarstream:~ $ bash /usr/local/bin/x728softsd.sh /usr/local/bin/x728softsd.sh: line 6: /sys/class/gpio/gpio13/direction: Permission denied /usr/local/bin/x728softsd.sh: line 7: /sys/class/gpio/gpio13/value: Permission denied X728 Shutting down... /usr/local/bi...)
03:13, 6 May 2021 174.95.128.12 talk performed unknown action "comments/add" on X728 (OK, friends. I guess I found a workaround. My X728 had a problem with turning off 3 seconds after power up, and the problem still existed after I completely reset my Raspberry Pi 4. However, when I connected my X728 to 'another Raspberry Pi', it worked, and again confirmed that it works on the original Raspberry Pi as well. I didn't understand this logic at all, but anyway, I'm glad to find it works again. There's still a lot to say about the company not supporting customers....)
12:23, 4 April 2021 174.95.128.95 talk performed unknown action "comments/add" on X728 (Same here. Excluding X728, my RPi4 works perfectly. However, if I re-install it, the power is automatically cut off after 3 seconds. I'm not sure if they can really give us an answer. But we must remember. It's Made in China.)
02:12, 1 April 2021 181.115.128.188 talk performed unknown action "comments/add" on X728 (x728 ver 1.3 does not shutdown when battery voltage is 3.0V. How to get safe shutdown when battery voltage drops bellow threshold?)
05:04, 12 February 2021 97.113.140.29 talk performed unknown action "comments/add" on X728 (Tired your suggestion, but no success. I even drained both batteries completely and the tried again. Oddly, that worked at first, but once the batteries got charged up to a certain point, the x728 shut down the RPi. I have no idea what's going on, but no one from Geekworm is responding on their dedicated forum. I'm not inclined to purchase any more of their products.)
22:09, 11 February 2021 87.19.206.239 talk performed unknown action "comments/add" on X728 (I have an issue with the RTC clock and can’t find a solution. I tried to install a brand new OS from the official Raspbian Buster Lite, and did a clean install of the x728.sh script from github. The error code at startup of raspberry is: [ 22.027235] rc.local[621]: hwckock: ioctl(RTC_RD_TIME) to /dev/rtc0 to read the time failed: Invalid argument [FAILED] Failed to start /etc/rc.local Compatibility See ‘systemctl status rc-local.service’ for details. I think the problem goes around “hwc...) Tags: Mobile edit Mobile web edit
17:35, 10 February 2021 82.6.0.80 talk performed unknown action "comments/add" on X728 (For anyone wondering. setting GPIO 13 as out and high will turn off the x728. Would be really helpful to have that listed here as not everyone can install the soft as lifted in this wiki. I am using it on a pi running android.)
23:33, 7 February 2021 95.90.215.5 talk performed unknown action "comments/add" on X728 (had the same problem, the Raspberry starts briefly and switches off again. After trying for a long time, it worked again using the following procedure. 1. Disconnect the X728 from the Raspberry and remove the batteries 2. Put the X728 back on the Raspberry 3. Insert the batteries (Raspberry must not start, it did it for me every now and then, then start all over again) 3. USB-C charger on connect the X728 4. Switch on X728. Since then everything has been working normally again. Hope it h...) Tags: Mobile edit Mobile web edit
23:19, 7 February 2021 95.90.215.5 talk performed unknown action "comments/add" on X728 (I found a solution for everyone who wants to shut down the Raspberry Pi and the X728 via a Python script. - import subprocess - subprocess.call(["sudo", "/usr/local/bin/x728softsd.sh"]) so it should work.) Tags: Mobile edit Mobile web edit
07:04, 5 February 2021 97.113.140.29 talk performed unknown action "comments/add" on X728 (I installed and used an x728 hat on an RPi4 a few months ago, and it worked great. Unfortunately, I had to do a complete reinstall of the operating system on that Pi, and when I went to reinstall the x728... I can't get it to work. When I try to boot it up (by applying power from the power brick via the usb-c port on the x728), I can see the red and green lights on the RPi start to flash as they would during startup, but then it simply shuts down after about three seconds. This happens every...)
22:53, 1 February 2021 31.12.59.80 talk performed unknown action "comments/add" on X728 (Hello, on my x728 the RTC clock works, but does not continue to run when it is switched off. The Raspberry 4 has the time from the last shutdown after switching on. The fake hwclock has been uninstalled. Already had another x728 and there was no problem. Can someone help?)
11:58, 23 January 2021 35.134.21.24 talk performed unknown action "comments/add" on X728 (Im experiencing an issue with starting up this UPS.I have tried charging my batteries with an efest battery pack charger and in the hat itself but when i try to power on the board it shuts down within 3 seconds. I have followed the troubleshooting tips above but i have yet to fin a problem. The Power light turns on and the 5v power led does as well, but then they both shut off. Id like to assume my board isnt broken and my batteries work, so is there a schema or effective way to test points w...)
19:30, 1 January 2021 80.130.146.104 talk performed unknown action "comments/add" on X728 (Hi there, the x728 works fine. The command "x728off" works wonderfully via the lxterminal, but I would like to use this command in a Python script so that I don't have to press the power button for 8 seconds after shutting down. Have already tried the subprocess module but without success. Does somebody has any idea? Thanks...)
14:12, 10 December 2020 Xiali talk contribs performed unknown action "comments/add" on X728 (It should be caused by the HDMI input resolution higher than 1080p25fps (the resolution supported by the Raspberry Pi is 1080p25fps)，By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
00:49, 10 December 2020 66.193.168.10 talk performed unknown action "comments/add" on X728 (Never mind, one of the TPS61088 Synchronous Boost Converters had a cold solder joint. I was able to flex the board and make the problem come and go. When I reflowed solder to and around the converter the problems went away. Unfortunately due to the quality of construction I will not be able to use it for my intended purpose. Bummer!)
00:21, 10 December 2020 66.193.168.10 talk performed unknown action "comments/add" on X728 (Mine seems to be defective, it's outputting 13.4v and the 5v out led flashes regardless of the condition. it seems to charge ok. I was planning on using this in an embedded application with an rpi 4b but I now have concerns about reliability. Anything to try?)
17:02, 19 November 2020 Xiali talk contribs performed unknown action "comments/add" on X728 (Hi dear，for the NUT & X728, As it is a DIY project, we dont know the details, please refer to x728-Software to read the voltage and power)
16:51, 19 November 2020 Xiali talk contribs performed unknown action "comments/add" on X728 (Hi dear ,The general environmental operation is no problem, the specific temperature range cannot be informed because the high and low temperature reliability test is not done. You can read the battery voltage and power through I2C There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
16:47, 19 November 2020 Xiali talk contribs performed unknown action "comments/add" on X728 (Hi dear ,The battery chip need a continuous learning process during reading the battery capacity, we suggest that the battery should be fully charged at first, and then put off the electricity fully. Repeat like that after many times, the battery capacity will be gradually accurate. Note: When you trying, DON'T remove the battery plug , If you do, you need to retry again. By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us h...)
01:58, 6 November 2020 50.196.4.117 talk performed unknown action "comments/add" on X728 (How can we configure the X728 with NUT? Using this unit with Home Assistance server and would like it to be able to communicate the Battery Status. NUT is the Linux UPS Manager, and Home Assistance has support for that.)
14:42, 23 October 2020 203.125.27.78 talk performed unknown action "comments/add" on X728 (Hi, what is the operating temperature and humidity range for this ? Thanks)
05:15, 8 October 2020 69.130.77.204 talk performed unknown action "comments/add" on X728 (I also had this issue, have you found an answer?)
05:07, 3 October 2020 86.165.211.19 talk performed unknown action "comments/add" on X728 (Hello, your x728 board is excellent! I was just wondering though how can I get servos to move position when I shutdown when I press the power switch?) Tags: Mobile edit Mobile web edit
21:09, 1 October 2020 AndreK talk performed unknown action "comments/add" on X728 (After charging, the battery capacity measurement is no longer correct and only slowly recovers when the Raspberry Pi has been running for a while? Furthermore, the volt measurement shows 3.6 V but the capacity measurement already shows only 5 percent. What could that be?)
18:42, 21 September 2020 5.67.105.38 talk performed unknown action "comments/add" on X728 (Although this device "supports 3A fast charging", how can you configure it to not fast charge? I want to use a battery but it has a max-charge-current of 2.6A.)
05:07, 21 September 2020 5.67.105.38 talk performed unknown action "comments/add" on X728 (How much current (max) does the ups draw for charging? While plugged in, can the device still output over 3amps if the supply is only 3amps?) Tags: Mobile edit Mobile web edit
19:39, 20 August 2020 Cindy talk contribs performed unknown action "comments/add" on X728 (Hello sir,Sorry, do design case but you caan use the HAT size acrylic case or N300 for X728, please refer to https://geekworm.com/.)
21:18, 18 August 2020 122.249.183.92 talk performed unknown action "comments/add" on X728 (Is there a case of the just size?)
11:52, 17 July 2020 Cindy talk contribs performed unknown action "comments/add" on X728 (Hi friend, Sorry, X728 is not compatible with X835, as the X835 requires 12V power supply.)
22:26, 7 July 2020 Natalka1122 talk performed unknown action "comments/add" on X728 (Is it compatible with X835? https://raspberrypiwiki.com/X835 If so, how it should be powered?)
17:21, 25 June 2020 125.136.173.179 talk performed unknown action "comments/add" on X728 (Why does the Raspberry Pi turn on and off repeatedly? The power turns on and turns off after 3 seconds, and turns on again. Is it because the battery is not fully charged? X750 had the same error...)
19:10, 17 June 2020 JesseArmand talk performed unknown action "comments/add" on X728 (I'm running https://raspap.com/ to use the Pi as a wireless hotspot. There was an issue with bringing up the wireless interface on RaspberryPi 3B+, if I short the jumper pin for ASD (Auto Shutdown). If I don't short the jumper, it becomes normal. Has anyone else encountered the same issue?)
17:23, 27 April 2020 Cindy talk contribs performed unknown action "comments/add" on X728 (Hi friend, The X728-A1 and X728-A2 will release later in May.)
02:42, 22 April 2020 76.164.52.114 talk performed unknown action "comments/add" on X728 (Cindy, When do you expect the X728-A1 and X728-A2 boards to be available? Is there a X728 Case in the pipeline?)
15:38, 21 April 2020 Cindy talk contribs performed unknown action "comments/add" on X728 (Hi friend, The X728 has just been releasded today, please refer to: https://geekworm.com/products/raspberry-pi-x728-max-5-1v-8a-18650-ups-power-management-board Best regards, Cindy/Geekworm)
11:52, 19 April 2020 142.112.172.114 talk performed unknown action "comments/add" on X728 (When will this item be released?)
14:28, 15 April 2020 Abby talk contribs created page X728 (Created page with "{{GD Template Impl}} thumb|right|X735 Metal Case ==Overview== ==Features== ==Packing List== ==Document== ==FAQ== ...")

Main public logs

Navigation menu

Search