-
Main public logs
Jump to navigation
Jump to search
Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 18:43, 16 July 2024 176.200.80.175 talk performed unknown action "comments/add" on X1202 (Yes, we know that it can be turned off with the external switch but since the Raspberry Pi is installed in an inconvenient position and is used as a dash in the car that connects to the ECU to display its data, we would like it to turn off on its own after a certain time that the power was turned off. Since X1202 communicates when there is no more power, on this event you could start a countdown, close open applications and turn off the system, without using a keyboard, mouse and external swi...)
- 16:06, 15 July 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi，On-board push button performs the same actions as the Pi's power button. Turn off X1202 and pi5 at the same time by using an external switch)
- 20:47, 13 July 2024 185.21.248.71 talk performed unknown action "comments/add" on X1202 (hi, how can I close all applications and turn off the Raspberry pi after 5 minutes after the external power supply has been turned off?? I don't want to drain the batteries to make it shut down)
- 12:25, 8 July 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hello，X1202 only supports 18650 Flat Top batteries,please refer to X1202#FAQ---[Q: What battery is recommended for this ups shield].)
- 12:24, 8 July 2024 Lisa talk contribs performed unknown action "comments/delete" on X1202
- 12:20, 8 July 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hello，X1202 only supports 18650 Flat Top batteries,please refer to FAQ---[Q: What battery is recommended for this ups shield].)
- 12:45, 7 July 2024 124.122.125.98 talk performed unknown action "comments/add" on X1202 (You say to not use batteries with built in protection circuit, but I want to use LiFePo4 cells. Can I use these well known cells? For safety I only use this type. What is the problem?)
- 11:24, 2 July 2024 Harry talk contribs performed unknown action "comments/add" on X1202 (Hello Refer to X1202#FAQ Q1)
- 08:50, 2 July 2024 98.13.9.168 talk performed unknown action "comments/add" on X1202 (I'm getting the same thing... my screen works but my keyboard doesn't light up)
- 11:18, 27 June 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi,X1202 UPS not compatible with X708-A1 Battery Holder.)
- 09:28, 27 June 2024 175.116.49.141 talk performed unknown action "comments/add" on X1202 (Can this be used with the X708-A1 board?)
- 14:49, 24 June 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (You can consider the X-UPS1 with 12V output)
- 14:38, 24 June 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hello,X1202 does not support X1009. X1009 requires DC12V power in, X1202 UPS only provides 5V output,)
- 07:16, 22 June 2024 185.211.32.105 talk performed unknown action "comments/add" on X1202 (Can this power 5, 3.5" drives on the x1009, through the board? can the x1009 power through the second barrel for the HD power? or would i use an ATX for the drives and leave the boards powered through the ups?)
- 03:54, 7 June 2024 23.93.48.84 talk performed unknown action "comments/add" on X1202 (I get warning in Ubuntu 24.04 on start: Raspberry pi PMIC Monitor: "This power supply is not capable of supplying 5A; power to peripherals..." screen seems to work...)
- 18:35, 31 May 2024 Harry talk contribs performed unknown action "comments/add" on X1202 (Hello, x1202 can meet your need. Refer to File:X1202-commnt1.png)
- 18:28, 31 May 2024 Harry talk contribs performed unknown action "comments/add" on X1202 (Sorry, No 3D file, only dxf file.)
- 18:28, 31 May 2024 Harry talk contribs performed unknown action "comments/delete" on X1202
- 18:28, 31 May 2024 103.192.225.57 talk performed unknown action "comments/add" on X1202 (Sorry, No 3D file, only dxf file.)
- 23:21, 30 May 2024 119.13.153.231 talk performed unknown action "comments/add" on X1202 (Does it have 3d file ?) Tags: Mobile edit Mobile web edit
- 03:31, 30 May 2024 144.223.86.230 talk performed unknown action "comments/add" on X1202 (Is it possible to turn off the 5V output on the XH2.54-2P ports or the USB-A connectors when the pi5 is shutdown? I want to use them to power an LCD display and speakers but they continue to draw power when the pi is shut off.)
- 10:34, 22 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hello，yes, you can use 1~4 18650 batteries.)
- 10:29, 22 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi，if you don't want to power Pi5 via pigo pins, you can use X728.)
- 06:47, 22 May 2024 23.93.48.84 talk performed unknown action "comments/add" on X1202 (Will this provide power if only 2 batteries are installed? I don't need the capacity of 4 18650s, but having a place to store and charge spares would be nice.)
- 04:14, 21 May 2024 23.114.212.80 talk performed unknown action "comments/add" on X1202 (Is there a way to run the pi5 off of the 5v out XH connector? Due to size constraints I cannot use the pogo pins. If I need to solder connectors from the GPIO to the Pogo pins, which ones are necessary for minimal function?)
- 17:13, 11 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi,Please remove X1202 from Pi5, wipe the pogo pin with alcohol,then reinstall it. please adjust the position of the pigo pin appropriately so that it contacts the Pi5 well.)
- 14:37, 10 May 2024 172.114.135.75 talk performed unknown action "comments/add" on X1202 (I noticed that the x1202 always said "AC Power OK" even with power plug disconnected. As the pld.py code ran I could press down on the Pi board and the x1202 would say "AC Power Loss". When I let up it would go back to "AC Power OK". Seems like a pogo is not making good contact. Any suggestions?)
- 11:15, 7 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (pogo pins is power to Pi 5)
- 11:09, 7 May 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi,①momentary switch port: XH2.54-2P; ②the functions of external switche and onboard switche are the same.)
- 09:07, 7 May 2024 23.114.212.80 talk performed unknown action "comments/add" on X1202 (One of the pogos looks like it contacts the area for the Real-time battery. Does this also supply power for that port?)
- 09:06, 7 May 2024 23.114.212.80 talk performed unknown action "comments/add" on X1202 (What are the specs on the momentary switch port? Does this work like one on the board?)
- 11:50, 19 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi，If you want to disable auto power on, you need to remove a resistor on the board. Please refer to X1202#FAQ--how to disable auto power on?)
- 11:49, 19 April 2024 Lisa talk contribs performed unknown action "comments/delete" on X1202
- 11:49, 19 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi，If you want to disable auto power on, you need to remove a resistor on the board. Please refer to FAQ--how to disable auto power on?)
- 08:43, 19 April 2024 69.251.186.62 talk performed unknown action "comments/add" on X1202 (THE disable power on modification does not work. when power is applied to the dc port or usb c the pi still auto boots.)
- 19:08, 17 April 2024 Harry talk contribs performed unknown action "comments/add" on X1202 (Refer to X1202#FAQ Q: How to disable auto power on)
- 19:08, 17 April 2024 Harry talk contribs performed unknown action "comments/delete" on X1202
- 19:08, 17 April 2024 Harry talk contribs performed unknown action "comments/add" on X1202 (Refer to [X1202#FAQ] Q: How to disable auto power on)
- 01:51, 17 April 2024 96.73.134.142 talk performed unknown action "comments/add" on X1202 (When you charge battery via USB C, pi boots if turned off. how to disable so charge battery without pi booting.)
- 11:02, 12 April 2024 172.56.33.198 talk performed unknown action "comments/add" on X1202 (Can you disable auto-boot if you plug power in? In some situation you do not want to boot only charge. Hardware or software modification needed?) Tags: Mobile edit Mobile web edit
- 16:17, 8 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi，When the load is heavy and the USB-C power supply is insufficient, the UPS will draw power from the battery. But if the USB-C power supply does not have overcurrent protection, it may be damaged. It is recommended to use 5V 5A power supply.)
- 02:06, 5 April 2024 37.201.195.203 talk performed unknown action "comments/add" on X1202 (What happens, if I connect a USB C power supply that does not provide 5V 5A but for example 5V 3A. Will the UPS use the batteries to make up for the missing power? Is it possible to charge the UPS with 5V 3A when the PI is turned off? Thank you)
- 15:09, 3 April 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hi,The usual 18650 batteries can be used, but please use high quality batteries.)
- 00:42, 2 April 2024 192.77.184.26 talk performed unknown action "comments/add" on X1202 (Manual says "Note: the voltage range must be 3.00~4.10vdc." 18650's can go down to 2.5V per cell. Can the minimum be 2.5-2.7V or is 3.0V min a hardware limitation?)
- 22:11, 12 March 2024 213.167.121.42 talk performed unknown action "comments/add" on X1202 (I've got the same issue. I'm using the official RPI 27W power supply through usb-c)
- 15:56, 7 March 2024 103.192.227.240 talk performed unknown action "comments/add" on X1202 (Hi,We have tested X1201 and there is no problem. Could you please provide more detailed information? send some pictures or videos to us, support@geekworm.com)
- 00:35, 6 March 2024 173.239.224.146 talk performed unknown action "comments/add" on X1202 (After using the USB C port on the x1202 I heard the board making small ticking noises. After I pulled the plug the entire unit lost power. Is the USB C port not the preferred port?)
- 15:33, 5 March 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (NOT support.)
- 04:50, 5 March 2024 192.77.184.26 talk performed unknown action "comments/add" on X1202 (Can this board tolerate being powered on DC jack AND USB-C simultaneously?)
- 17:52, 2 January 2024 Abby talk contribs created page X1202 (Created page with "{{GD Template Impl}} ==Overview== ==Features== ==Packing List== ==User Manual== <!--Add review function! --> <comments /> <!--Please choose the --> <!--Remove other cate...")
