Difference between revisions of "X301"
Jump to navigation
Jump to search
Line 19: | Line 19: | ||
* Power the raspberry pi and X301 via test pins - No additional wire required | * Power the raspberry pi and X301 via test pins - No additional wire required | ||
* Supports operating system installation and booting from your HDD/SSD | * Supports operating system installation and booting from your HDD/SSD | ||
+ | |||
+ | ==How to Power== | ||
+ | Power via USB C 5V In port of X301 | ||
+ | |||
+ | Power supply requirement: 5Vdc +/-5% , ≥3A | ||
+ | |||
+ | ==How to Cool== | ||
+ | Recommend to use with Geekworm [[C296]] aluminum heatsink for Raspberry Pi Zero 2 W. | ||
+ | [[C296]] also compatible with raspberry pi zero w by using thermal pads of different thicknesses, thermal pads for raspberry pi zero w is not included. | ||
==Packing List== | ==Packing List== | ||
+ | * 1 x X301 V1.0 Expansion Board | ||
+ | * 4 x F/F M2.5*12 mm Spacers | ||
+ | * 4 x CM2.5*5mm Screws | ||
+ | * 2 x CM2.5*10mm Screws | ||
+ | * 2 x M3*5mm Screws (to fix HDD) | ||
==User Manual== | ==User Manual== |
Revision as of 18:34, 10 May 2022
Overview
This X301 is a 2.5-inch SATA HDD/SSD storage expansion board for the raspberry pi zero 2 w or raspberry pi zero w.
Geekworm has provided X-series storage solutions for Raspberry Pi since 2017, our storage expansion boards have been continuously improved with the upgrade of Raspberry Pi. Many Geekworm users contacted us to inquire about the Zero 2 W storage expansion board, that is why the X301 is born.
Note:
- X301 is not compatible with raspberry pi zero.
- Since the X301 expands the Micro OTG port of the pi zero motherboard into a USB HUB, the Micro OTG port of the pi zero motherboard can no longer be used.
Features
- Ideal storage solution for Raspberry Pi Zero 2 W / Zero W - 2.5" SATA HDD/SSD Shield
- USB Hub for Raspberry Pi
- Power the raspberry pi and X301 via test pins - No additional wire required
- Supports operating system installation and booting from your HDD/SSD
How to Power
Power via USB C 5V In port of X301
Power supply requirement: 5Vdc +/-5% , ≥3A
How to Cool
Recommend to use with Geekworm C296 aluminum heatsink for Raspberry Pi Zero 2 W. C296 also compatible with raspberry pi zero w by using thermal pads of different thicknesses, thermal pads for raspberry pi zero w is not included.
Packing List
- 1 x X301 V1.0 Expansion Board
- 4 x F/F M2.5*12 mm Spacers
- 4 x CM2.5*5mm Screws
- 2 x CM2.5*10mm Screws
- 2 x M3*5mm Screws (to fix HDD)
Enable comment auto-refresher
Anonymous user #2
Permalink |
Walker
Anonymous user #2
Permalink |
Walker
Anonymous user #1
Permalink |
Lisa