Difference between revisions of "X862 V1.0"
Jump to navigation
Jump to search
Line 55: | Line 55: | ||
==Packing List== | ==Packing List== | ||
− | * | + | * X862 M.2 NGFF SATA SSD Shield x 1 |
− | * USB3.1 jumper x 1 | + | * USB3.1 jumper x 1 |
− | * Screw M2.5 *6mm x | + | * Screw M2.5 *6mm x 4 |
− | * Spacer M/F M2.5 *12mm x 4 | + | * Spacer M/F M2.5 *12mm x 4 |
− | * Spacer F/F M2.5 *8mm x 4 | + | * Spacer F/F M2.5 *8mm x 4 |
− | * Screw driver x 1 | + | * Screw driver x 1 |
− | * Screw M2.5 * | + | * Screw M2.5 *4mm x 1 |
==Matching Metal Case== | ==Matching Metal Case== |
Revision as of 18:36, 13 May 2020
Overview
This is the X862 M.2 NGFF SATA SSD Shield for Raspberry Pi 4 model B, it provides a complete storage solution for raspberry pi 4. It supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230.
Important NOTE:
This X862 is not fit to ROCK64 and Raspberry Pi 3B+ /3B because the difference of USB 3 position. Please refer to X860 if you want use M.2 NGFF SATA SSD on the Raspberry Pi 3B+/3B or ROCK64 board.
Features
FOR USE WITH |
Raspberry Pi 4 Model B |
Operating System |
All Raspberry Pi operating systems |
KEY FEATURES |
|
SPECIFICATION |
|
NOTES |
|
Packing List
- X862 M.2 NGFF SATA SSD Shield x 1
- USB3.1 jumper x 1
- Screw M2.5 *6mm x 4
- Spacer M/F M2.5 *12mm x 4
- Spacer F/F M2.5 *8mm x 4
- Screw driver x 1
- Screw M2.5 *4mm x 1
Enable comment auto-refresher
Anonymous user #3
Permalink |
Walker
Anonymous user #3
Permalink |
Anonymous user #3
Anonymous user #1
Permalink |
Cindy
Anonymous user #2