Difference between revisions of "Template:HDMI to CSI"
Jump to navigation
Jump to search
(No difference)
|
Latest revision as of 17:16, 24 July 2024
Geekworm HDMI to CSI Module Series:
Convert HDMI signal acquisition into CSI signal and I2S audio signal. The maximum capture resolution depends on the HDMI to CSI converter board as well as the Raspberry Pi hardware.
Raspberry Pi hardware are primarily divided into two series, one supporting a maximum of 1080P60Hz and the other supporting a maximum of 1080P50Hz.
- Raspberry Pi versions that support up to 1080P60Hz: CM3, CM4, Pi 5B
- Raspberry Pi versions that support up to 1080P50Hz: zero, zero2, Pi3B, Pi4B, etc.
Picture | Model | Description | Max Input Resolution | I2S Audio | HDMI Capture Chip | PCB Dimension | CSI-2 Connector | Supported SOC |
---|---|---|---|---|---|---|---|---|
C779 | HDMI to CSI-2 | 1080p50fps | NO | Toshiba TC358743XBG | 35 x 50 mm | 15-PIN FPC (pitch 1.0 mm) | Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W | |
C790 | HDMI to CSI-2 | 1080p60fps | Yes | Toshiba TC358743XBG | 30 x 45 mm |
|
Pi 5B / 4B / 3B+ / 3B / 3A+ / Zero / Zero W/ Zero 2W / CM3 / CM4 | |
X630 | HDMI to CSI-2 | 1080p50fps | Yes, but I2S wiring or the X1300-A2 accessory board is necessary | Toshiba TC358743XBG | 30 x 42.4 mm | 15-PIN FPC (pitch 1.0 mm) | 4B / 3B+ / 3B / 3A+ / Zero W / Zero 2W | |
X1300 | HDMI RX to MIPI CSI-2-TX | 1080p60fps | Yes, but I2S wiring or the X1300-A2 accessory board is necessary | Toshiba TC358743XBG | 30 x 37.5 mm | 22-PIN FPC (pitch 0.5 mm) | Pi 5B / CM4 IO | |
X1301 | HDMI RX to MIPI CSI-2-TX HDMI loop output | 1080p60fps | Yes | Toshiba TC358743XBG | 57 x 85.5 mm | 22-PIN FPC (pitch 0.5 mm) | Pi 5B / 4B / 3B / 3B+ / 3A+ / CM4 IO | |
X1300-A2 | I2S audio accessory board for X630 / X1300 | 1080p60fps | This is a I2S audio accessory board | - | 57 x 65 mm | - |