Difference between revisions of "X306"
Line 87: | Line 87: | ||
* Max output current: 4000mA | * Max output current: 4000mA | ||
|} | |} | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
==How to Power== | ==How to Power== |
Revision as of 17:48, 28 May 2024
Contents
Updated
X306 is updated to V1.3 on May 28th, 2024.
Please check the information on the page on the sales platform to confirm the version you will get.
- Only compatible with Raspberry Pi Zero 2W now
- Removed 3 standard USB-A 2.0 ports (Users have less need for this. Can directly use OTG port on the Raspberry Pi motherboard)
- Removed 4-pin header for external power swtich and always-on power option(Users have less need for this. Can can solder it yourself if needed)
- Smaller size, simplified use
Overview
X306 is a one cell 18650 UPS shield designed for Raspberry Pi Zero W / 2W.
It equipped with 3 standard USB-A 2.0 ports, and a USB Type C to power. The USB-A port can be used to connect external devices such as mouse, keyboard etc.
Do not connect any device to the Micro USB, OTG port of Raspberry Pi Zero 2W when use with X306, or the USB2.0 ports of X306 is not available to use.
Note:
- BOOKWORM does not require any setup and can be used directly with a keyboard and mouse.
- The Raspberry Pi board, power adapter are not included in the packing list.
- Raspberry pi micro OTG port cannot be used as it is occupied by USB HUB of X306
- Do not connect any device to the Micro USB, OTG port of Raspberry Pi Zero 2W when use with X306, or the USB2.0 ports of X306 is not available to use.
4 Pin header function description:
Pin | Function |
---|---|
AL ON: Pin 1&2 | Short: Power always on, power button disabled; |
AL ON: Pin 1&2 | Open: Power button Press to switch on, Hold 3 seconds to switch off |
PWR SW: Pin 3&4 | for external 2-pin momentary switch |
"AL ON" enable, "PWR SW" will be disable.
"PWR SW" enable, "AL ON" will be disable.
Features
Key Features |
|
---|---|
Specification |
|
How to Power
Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X306 NOT Pi zero 2W)
How to Cool
Aluminum Heatsink for raspberry pi zero 2 w, please refer to C296
Packing List
- 1 x X306 18650 UPS Shield
- 4 x M2.5 x 5mm Screws
PCB dimention
- X306 V1.1 Dimensions source file (DXF): File:X306-pcb-v1.3.dxf or File:X306V1.1.dxf - You can view it with Autodesk Viewer online
FAQ
Q2. What is the power output for each usb port?
A: It is 5V, all ports share 4A, not limited to 500mA.
Q3. Is there any way I can check from the raspberry pi if it's connected to the power or the battery from the UPS?
A: When connected to the power supply to X306, the power supply supplies power to the Raspberry Pi; remove the power supply, it is powered by the battery.
Q4. No data on the usb ports?
A: There is a feedback from buyers that solved this problem. Please refer to go to:X306#comment-4545
in config.txt comment out: dtoverlay=dwc2 and in cmdline.txt remove: modules-load=dwc2,g_ether reboot and it works!
Enable comment auto-refresher
Anonymous user #18
Permalink |
Lisa
Anonymous user #16
Permalink |
Lisa
Anonymous user #17
Lisa
Anonymous user #17
Lisa
Anonymous user #15
Permalink |
Anonymous user #14
Permalink |
Lisa
Anonymous user #13
Permalink |
Anonymous user #11
Permalink |
Walker
Anonymous user #9
Permalink |
Anonymous user #10
Anonymous user #12
Anonymous user #8
Permalink |
Anonymous user #7
Permalink |
Walker
Anonymous user #6
Permalink |
Walker
Anonymous user #5
Permalink |
Walker
Anonymous user #3
Permalink |
Anonymous user #4
Anonymous user #2
Permalink |
Lisa
Anonymous user #1
Permalink |
Lisa