5,266
edits
Changes
'''PCB Size:''' 87mm x 56mm
|}
==User Manual==
* Hardware Installation： [https://suptronics.com/Raspberrypi/Storage/x1012-v1.2_hardware.html X1012 Hardware]
* Configuration Tutorial：
1. Enable PCIe to make nvme ssd work, please refer to [[NVMe SSD boot with the Raspberry Pi 5]]
2. Tell the Pi that the X1012 POE is capable of 5A, so the USB current will get the full 1.6A
sudo rpi-eeprom-config -e
Add PSU_MAX_CURRENT=5000 at the end of the file that reads like this:
Save and exit. In nano, you do that by hitting CTRL + X, answering Y and hitting Enter when prompted.
Reboot your Raspberry Pi 5 to make the change take effect.
* Introduction to Implementing Auxiliary Power on POE: [[File:AN3472-Implementing-Aux-Power-in-PoE.pdf]]
==Test & Reviews==
* 1 x M2.5* 7 F/F Spacer (And two M2.5*5 screws to fix the 2230/2242/2260 SSDs)
* 1 x CM2x3 screw (sliver color, to fix 2280 SSD only)
==FAQ==