5,353
edits
Changes
X876
,{{GD Template Impl}}
[[File:X876-V1.1-IMG_4635-Interface-Schematic.jpg|thumb|right|X876 Shield Interface]]
[[File:X876-V1.1-IMG_4625.jpg|thumb|right|X876 Assemble]]
<!--
[[File:X863-K-acce.jpg|thumb|right|X876-K Packing List]]
-->
[[File:X876-Supported-SSD.jpg|thumb|right|X876 Supported SSD]]
[[File:X876-V1.1.jpg|thumb|right|X876 Read & Write Speed Test]]
[[File:X863-C1-Inner.jpg|thumb|right|X876-K Inner View]]
==Features==
* Ideal storage solution for Raspberry Pi 4 - NVME M.2 SSD Shield
* Integrated high efficiency step-Down Converter, 3.3V max 3.5A to power the SSD
* USB bus-powered AND Raspberry Pi 4 direct 5V power via onboard pogo pins
* Supports up to 2TB NVME M.2 SSD solid-state drive
* Supports multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230,additional spacer required for SSD lengths 2260, 2242 and 2230but '''only 2280 holes are already threaded'''* UASP supported for Raspberry Pi 4(Not support TRIM)
* LED blue indicator indicates drive status
* Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying
* Fully compatible with X732 for power management and cooling your Raspberry Pi 4
* PCB Size:87x82mm/3.42x3.22inch
==How to Power==
* Power supply: 5Vdc +/-5% , ≥3A (Via Type-C port of '''Raspberry Pi 4''' or '''[[X732]]''')
==Document==
* [[File:Usb3-frequency-interference-papers.pdf]]
* 1x USB3 Connector
* 1x USB3.0 Cable
* 4x M2.5 *5+3mm M/F Spacers
* 4x M2.5 *5mm Screws
* 1x M2 *4mm Screw
* 1x Screw driver
[[File:X876-V1.1-acce-size.jpg|800px|X876 Packing List & Dimension]]
==Match Metal Case==
==User Manual==
* X876 Dimensions source file (DXF): [[File:X876-PCB-v1.dxf|X876 Dimensions source file (DXF)]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online
===Installation Video===
Please refer to X863-K, it is the same!
https://youtu.be/fapPM632OOI
{{#ev:youtube|https://youtu.be/fapPM632OOI}}
==FAQ==
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q1： Can I power use the official RaspberryPi POE Hat to power the Raspberry Pi 4, X876 V1.1 NVME M.2 SSD Storage Expansion Board Support Key-M 2280 SSD ?
</div>
<div class="mw-collapsible-content">
A: Yes, it is OK.
</div>
</div>
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q2：IS the X876 compatible with PCIE 4.0 or 3.0?
</div>
<div class="mw-collapsible-content">
A: The X876 is only compatible with PCIE 3.0
</div>
</div>
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0; color:red;">
Q3: Why is the X876 SSD not recognized?
</div>
<div class="mw-collapsible-content">
A: It is recommended that you troubleshoot the following points:
# Check if you are using the correct SSD, X876 supports M.2 NVME ssd only but not sata/ngff SSD, please refer to the picture below:
[[File:X876-Supported-SSD.jpg|600px]]
# Use the '''black USB 3.0 cable''' in the box to replace the USB connector to check if the USB connector is faulty.
# Check the pogo pins on the X876 board are damaged.
# Startup the Raspberry Pi and enter the teminal window, then run the command <code>lspci</code> to check if there is an x876 device? (or send the result to '''support@geekworm.com''')
# consider partitioning the SSD, formatting it, etc. refer to to the documentation: [[File:Tutorial Initalize New SSD.pdf]]
# Finally, please let us know the store you purchased it from and your order number so we can check if we need to update the firmware for x876.
</div>
</div>
<!--Add review function! -->