Difference between revisions of "KVM-A4"
Line 53: | Line 53: | ||
==User Manual== | ==User Manual== | ||
+ | ===Software Guide=== | ||
+ | Download here: https://pikvm.org/download/ | ||
+ | |||
+ | For Raspberry Pi Zero 2W/Zero W, please use the follow V2 OS. | ||
+ | [[File:Pi-Zero-V2.png|none|PiKVM V2]] | ||
+ | |||
+ | |||
+ | Firstly, we recommend carefully reading official documentation from website: https://docs.pikvm.org/faq/. | ||
+ | |||
+ | If you run into any issues you can check the following Q&A. If that still doesn't help you you're welcome to raise an issue ticket at https://geekworm.com/community/forum/topic/78220/pikvm-faq or email to us (support@geekworm.com) | ||
+ | |||
+ | (<span style="color:red;">Please be sure to provide installation pictures or videos to contact us, which can effectively solve the problem.Thanks.</span>) | ||
+ | |||
+ | blog sharing for reference: https://www.andysblog.de/kvm-over-ip-pikvm-als-bausatz | ||
+ | |||
<!--Add review function! --> | <!--Add review function! --> |
Revision as of 12:27, 21 November 2022
Contents
Overview
PiKVM-A4 is one of the members of PiKVM family, it only supports Raspberry Pi zero 2 W without a matching metal case.
The PiKVM-A4 is composed of follow parts:'
- X630 HDMI to CSI-2 Board (for video capture)
- X630-A4 HAT Board (for ethernet, RTC, ATX Control power in etc)
- X630-A5 Adapter Board (it is installed inside the PC case, and it connect the computer motherboard and IO panel cabe of PC case))
- 0.96 inch OLED (for display, Resolution: 128×64 pixel)
- Ethernet Cable (TIA/EIA-568.B connection, and it's ATX control signal cable)
- Important Note: The OLED screen will not work if you use PI ZERO image, because pikvm OS has not fixed this problem. If it is fixed in the future, the screen will work fine.
How to Power
- Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X630-A3 / X630-A4 / X630-A8)
How to Cool
- For use with raspberry pi zero 2 w, X630-A4 (PiKVM-A4) allows to use C296 aluminum heatsink with your raspberry pi zero 2 w, but user need to prepare 4pcs M2.5*7mm screws yourself.
Packing List
- 1 x 0.96 inch OLED: Resolution: 128×64 pixel, with 2 piece of M2*6 screws
- 1 x Ethernet Cable (Cable length: 100cm)
- 1 x X630 HDMI to CSI-2 Module
- 1 x FPC Cable(8cm length)
- 1 x X630-A4 Expansion Board
- 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
- 8 x M2.5x3mm Screw
- 3 x M2.5x4+4mm Spacers
- 1 x M2.5x10+4mm Spacer
- 1 x M2.5x15+4mm Spacer
- 2 x M2.5x15mm F/F Spacers
- 1 x X630-A5 V1.0 Adapter Board
- 1 x M3.5x6mm Screw
- 4 x ATX Control Cable(2pin Female to Female Dupont Cables) (Cable Length: 47cm / 18.50 inch)
Hardware Parameters
Connection Diagram
Note:
- The X630-A5 adapter board will be install into the PC Case.
- The wire group ① connect to X630-A5 comes from the PANEL of PC Case.
- The black and red wires(wire group ②) come from X630-A5 accessories.
Installation Video
PiKVM-A4 Kit: https://youtu.be/a2oYTEh7QC0
User Manual
Software Guide
Download here: https://pikvm.org/download/
For Raspberry Pi Zero 2W/Zero W, please use the follow V2 OS.
Firstly, we recommend carefully reading official documentation from website: https://docs.pikvm.org/faq/.
If you run into any issues you can check the following Q&A. If that still doesn't help you you're welcome to raise an issue ticket at https://geekworm.com/community/forum/topic/78220/pikvm-faq or email to us (support@geekworm.com)
(Please be sure to provide installation pictures or videos to contact us, which can effectively solve the problem.Thanks.)
blog sharing for reference: https://www.andysblog.de/kvm-over-ip-pikvm-als-bausatz
Enable comment auto-refresher