Difference between revisions of "CM4 to CM3 Adapter"
Jump to navigation
Jump to search
Line 19: | Line 19: | ||
* Raspberry Pi Compute Module 4 interface | * Raspberry Pi Compute Module 4 interface | ||
* 1 x CM3 interface | * 1 x CM3 interface | ||
− | * 1 x System status led indicator | + | * 1 x Boot led(System status led indicator) |
* 1 x Reboot Button | * 1 x Reboot Button | ||
* Operating temperature: 0℃~80℃ | * Operating temperature: 0℃~80℃ |
Revision as of 17:39, 17 August 2021
Contents
Overview
Since the Raspberry Pi Compute Module 3 (CM3) module is in short supply, the CM4 to CM3 adapter is designed to convert CM4 module to CM3 interface.
This adapter board converts the latest Raspberry Pi Compute Module 4 (CM4) to CM3 interface, allowing CM4 to adapt to the old CM3+/CM3/CM3L series baseboard. Also Support to use CM4 with Geekworm 12mm aluminum alloy heatsink C235.
When install the CM4 module into CM4 to CM3 adapter board, please pay attention to the CM4 install directions.
Note:
- Make sure that the CM4 module is installed on the expansion board correctly before power on.
- Please pay attention to the CM4 install directions.
- The Raspberry Pi Compute Module 4 or heatsink is not included in the packing list.
Features
- Raspberry Pi Compute Module 4 interface
- 1 x CM3 interface
- 1 x Boot led(System status led indicator)
- 1 x Reboot Button
- Operating temperature: 0℃~80℃
- Dimensions: 67.6x46.5mm/2.66x1.83inch
Packing List
1x CM4 to CM3 Adapter
Enable comment auto-refresher
Anonymous user #8
Permalink |
Lisa
Anonymous user #7
Permalink |
Anonymous user #6
Permalink |
Lisa
Anonymous user #5
Permalink |
Anonymous user #5
Lisa
Anonymous user #4
Permalink |
Lisa
Anonymous user #4
Lisa
Anonymous user #3
Permalink |
Anonymous user #3
Anonymous user #2
Permalink |
Lisa
Anonymous user #2
Permalink |
Anonymous user #1
Permalink |
Lisa
Lisa