T300

Jetson Nano 2.5 inch SATA SSD/HDD Shield

Jetson Nano 2.5 inch SATA SSD/HDD Shield - Front

Jetson Nano 2.5 inch SATA SSD/HDD Shield - Back

Jetson Nano 2.5 inch SATA SSD/HDD Shield - How to power

T300 V1.1 Packing List

T300-C3 Packing List

T300 PCB Layout

Overview

NVIDIA Jetson Nano 2.5 inch SATA SSD/HDD Shield Storage Expansion Board USB 3.1 T300 V1.0 for NVIDIA Jetson Nano Developer Kit

This is an expansion board designed specifically for NVIDIA Jetson nano developer kit that supports up to 4TB 2.5-inch ssd/hard drives, it allowing you to expand your storage with high-speed SSD drives on NVIDIA Jetson nano developer kit.

Please refer to NVMe M.2 SSD Shield if you want use extrem high performance NVMe M.2 SSD on jetson nano.

How to boot the rootfs from external drive: https://www.jetsonhacks.com/2019/04/25/jetson-nano-run-on-usb-drive/

Features

	ITEM	DESCRIPTION
	FOR USE WITH	Jetson Nano
	OPERATING SYSTEM	All operating systems
	KEY FEATURES	· Ideal storage solution for Jetson Nano - 2.5"" SATA HDD/SSD Shield · Supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) · USB 3.1 Gen1 to SATA 6Gb/s bridge controller · USB 3.1 Gen1 connectivity offers plug-and-play functionality on your Jetson Nano · Quick file transfer with high-speed USB3.1 Gen1 connectivity  from a PC or a Mac · Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed · On-board DC power jack allows to provide enough power to HDD/SSD · Intelligent power management - Automatic powering off when system shutdown · With 1 Female to 2 Male DC cable supplied to power both T300 and Jetson Nano · USB bus-powered or powered by external power adapter · LED blue indicator indicates drive status
	POWER SUPPLY	· Power supply via DC jack :  5VDC ±5%. · A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down.THIS IS VERY IMPORTANT!!
	I/O PORTS	· USB Type-A socket x 1 · DC Jack  5.5x2.1mm x 1 · 22Pin SATA socket x 1
	DIMENSION	PCB Size: 123mm x 79mm

Power supply

There are 3 power supply methods:

• Directly power the motherboard is acceptable if use a good quality DC 5V 4A power adapter.(otherwise the current is not enough to 2.5 inch sata ssd)
• Power the jetson nano and T300 vith 1 female to 2 male DC cable, require a good quality DC 5V 4A power supply, otherwise jetson nano will be automatically shut down.
• Can power the T300 separately, but will lose the power management function.

Packing List

• 1 x T300 V1.1 2.5 inch SATA SSD/HDD Shield
• 1 x USB 3.1 Bridge
• 1 x 1 Female to 2 Male DC cable (length: 15cm)
• 1 x installaton screw pack

Installation Guide

Matching Case

Please refer to T300-C3.

FAQ

Q: How to boot the rootfs from external drive?

A: Please refer to https://www.jetsonhacks.com/2019/04/25/jetson-nano-run-on-usb-drive/

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

47 months ago

Score 0

Please let me know hole layout?

Permalink | Reply