8,941
edits
Changes
Jump to navigation
Jump to search
X300
,Created page with "Full Function Expansion Board X300 + Antenna Set (SKU:370656) KEY FEATURES: Input Voltage: *6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspber..."
Full Function Expansion Board X300 + Antenna Set (SKU:370656)
KEY FEATURES:
Input Voltage:
*6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspberry Pi
SATA:
*Allows you to connect SATA devices to your Raspberry Pi
Audio
*3.5mm MIC in jack
*3.5mm stereo audio jack
*SPDIF output
*Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
Wireless:
*WiFi (IEEE 802.11b/g/n) with external antenna
*IR sensor (38KHz)
*Bluetooth serial communication
USB Storage:
*Self-powered USB hub with 3 ports
Real-time clock (RTC):
*Based on DS3231SN with included CR2032 battery
Misc:
*Power output socket
*Camera flex slot so camera can still be used with the expansion board attached
*DIP switch to remove connection from RPi’s pin header
*Directly connected on top of the Raspberry Pi using the board GPIO header pins
*No wiring nor soldering is required
*Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
*Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
Dimensions:
*85 x 56mm (Same size as Raspberry Pi)
PACKING LIST:
*1 x Expansion board (Includes 1 x CR2032 battery)
*1 x 2.4GHz Wi-Fi antenna
*1 x USB male to male adapter
*1 x Pack of plastic screws
KEY FEATURES:
Input Voltage:
*6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspberry Pi
SATA:
*Allows you to connect SATA devices to your Raspberry Pi
Audio
*3.5mm MIC in jack
*3.5mm stereo audio jack
*SPDIF output
*Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
Wireless:
*WiFi (IEEE 802.11b/g/n) with external antenna
*IR sensor (38KHz)
*Bluetooth serial communication
USB Storage:
*Self-powered USB hub with 3 ports
Real-time clock (RTC):
*Based on DS3231SN with included CR2032 battery
Misc:
*Power output socket
*Camera flex slot so camera can still be used with the expansion board attached
*DIP switch to remove connection from RPi’s pin header
*Directly connected on top of the Raspberry Pi using the board GPIO header pins
*No wiring nor soldering is required
*Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
*Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
Dimensions:
*85 x 56mm (Same size as Raspberry Pi)
PACKING LIST:
*1 x Expansion board (Includes 1 x CR2032 battery)
*1 x 2.4GHz Wi-Fi antenna
*1 x USB male to male adapter
*1 x Pack of plastic screws