From Geekworm Wiki
Jump to navigation Jump to search

Full Function Expansion Board X300 + Antenna Set (SKU:370656)

KEY FEATURES: Input Voltage:

  • 6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspberry Pi


  • Allows you to connect SATA devices to your Raspberry Pi


  • 3.5mm MIC in jack
  • 3.5mm stereo audio jack
  • SPDIF output
  • Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)


  • WiFi (IEEE 802.11b/g/n) with external antenna
  • IR sensor (38KHz)
  • Bluetooth serial communication

USB Storage:

  • Self-powered USB hub with 3 ports

Real-time clock (RTC):

  • Based on DS3231SN with included CR2032 battery


  • Power output socket
  • Camera flex slot so camera can still be used with the expansion board attached
  • DIP switch to remove connection from RPi’s pin header
  • Directly connected on top of the Raspberry Pi using the board GPIO header pins
  • No wiring nor soldering is required
  • Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
  • Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!


  • 85 x 56mm (Same size as Raspberry Pi)


  • 1 x Expansion board (Includes 1 x CR2032 battery)
  • 1 x 2.4GHz Wi-Fi antenna
  • 1 x USB male to male adapter
  • 1 x Pack of plastic screws