Changes

# The P165<span class="tb_red">(P165-A 2026 Ver.)</span> Embedded Armor Aluminum Alloy Heatsink stands <span class="tb_red">8mm</span> Radiator is 7mm high , which is designed with a negative tolerance design, and comes . And it is equipped with M2.5*5+5 copper spacers for a ; so the total assembled height of is 12mm. This setup is compatible with , which can support most of Raspberry Pi 4 expansion boards (excluding not support PoE expansion boardsboard); simply if you use expansion board with other height, you only need to replace the copper spacers with ones of the correct right height for fitting other-sized expansion boards. <span class="tb_red">Contact us directly if (If you require custom-need a special height copper spacers.</span># The raspberry pi hat positioning hole has internal thread for easy fixing from above or below; Compared to the raspberry pi PCB, the entire heat sink shrinks inward by 0.5 mmplease contact us.)