2,917
edits
Changes
Jump to navigation
Jump to search
X729
,{{GD Template Impl}}
[[File:X729-acce+size.jpg|thumb|right|X729 V1.3]]
[[File:X729-size.jpg|thumb|right|X729 V1.3 Dimension]]
[[File:X728-Interface-Schematic.jpg|thumb|right|X729 V1.3 Interface Schematic]]
[[File:X729-IMG-4918-jumper.jpg|thumb|right|X729 V1.3 Jumper Cap Function]]
[[File:X729-IMG-4971.jpg|thumb|right|X729 V1.3 + OLED + External Momentary Switch]]
[[File:X729-Oled.jpg|thumb|right|X729]]
==Overview==
'''[NOTE]''': X729 supports also Raspberry Pi 5 hardware, the installation script is updated. Refer to [[X729-script]]
This X729 is an ultra-compact advanced uninterruptible power supply expansion board for all current models of the Raspberry Pi using a 40 pin header.
It provides Max. 5.1V 6000mA Power Backup for even the most demanding Raspberry Pi set ups, intelligent and safe power management, safe shutdown, auto power-on, battery reverse polarity protection circuit, AC power loss detection, battery capacity reading, low battery automatic shutdown, real- time clock(RTC), OLED display, Buzzer alarm, PWM Fan and Wide Voltage 6-24V Input.
The X729 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications. The X729 can also be used with the [[X825]] (2.5" HDD/SSD Shield) and [[X857]] / [[X862]] (MSATA/M.2 NGFF SSD shield) for safe data backup.
==For Use With==
* Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+ / 4 Model B
==SAFETY INSTRUCTIONS AND WARNINGS==
* <span style="color:red;">You must read these safety instructions and warnings before charging your batteries.
* <span style="color:red;">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
* <span style="color:red;">Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".
* <span style="color:red;">Do not mix and use old batteries and new batteries, or batteries with different brand names.
* <span style="color:red;">Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
* <span style="color:red;">When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X729 on the wood material or carpet and unattended.
* <span style="color:red;">Must keep the X729 away from children.
* Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebattery.com/en/
==Features==
'''UPS Output'''
* Provides continuous operations for up to 10~30hours (depending on battery type and qty used)
* Max 5.1V 6000mA Power Backup for even the most demanding RPi set ups
* Integrated TI INA219 12-bit current/voltage/power monitor
* Measure both output voltage and current draw over I2C with high precision
* Integrate Advanced Power MOSFET with Equivalent of 7mΩ RDS(ON) to reduce power loss
'''Battery Charging'''
* Supports 3000mA fast battery charging
* Battery over current protection and over voltage protection
* Protection of battery cell Reverse Connection
* Integrated Maxim's fuelgauge systems (Reading battery voltage and percentage over i2c)
* Onboard 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
* 18650 two cells lithium Ion holder
'''Power Input'''
* Integrated highefficiency stepdown DCDC converter
* '''Wide 6V to 24V operating input range'''
* Up to 95% Efficiency
* Up to 10A output current to keep 3A fast charging and powering Raspberry Pi at the same time
* Allows powering from a car, a solder pannel and other power sources
* Most common power input jack: 5.5x2.1mm
'''Power Management'''
* Onboard push button to control power on, safe shutdown, reboot and force shutdown
* Supports full poweroff from software
* Onboard blue LED shows the status of power on, reboot and shutdown
* AC power loss or power adapter failure detection (LED, GPIO and buzzer alarm)
* Jumper setting to enable Auto power on when power applied or restored
* Automatic safe shutdown when battery low (voltage programmable)
* Onboard buzzer alarm for power loss and low battery
* Ultralow standby power consumption to maximize battery life
* Advanced system powerpath management avoids batteries frequent charging and discharging
'''RTC'''
* Integrated Hardware Real Time Clock (RTC) with Battery BackUp
* Keeps track of the time while the Raspberry Pi is switched off
* Uses the most common DS1307 RTC real time clock
* Uses the 18650 battery to maintain the date and time no additional battery required
'''FAN'''
* Dedicated PWM cooling fan for Raspberry Pi
* Air flow up to 6.01CFM and maximum speed of 5000 RPM
* Smooth PWM adjustment provides a quiet experience
* RealTime fan speed reading
* Programmable temperature and fan speed
'''Misc'''
* Powers the Raspberry Pi via the 40pin header no additional cabling required
* Reserved 40pin stackable Header for AddOn Boards
* 1x4 Pin header and Screw holes for OLED display
* Works with all current models of the Raspberry Pi using a 40 pin header
* XH2.54 connectors for extra battery x1, 5V output x2
* PH2.04P for external power switch
==Specification==
* '''Power input: 6-24Vdc , ≥3A'''
* '''UPS output : 5.1V ±5% Max 6A'''
* UPS charging current: 2.3~3.2A
* Terminal Battery Voltage : 4.24V
* Battery Recharge Threshold : 4.1V
==How to Power==
* Please use '''6-24''' power adapter with DC5521 jack to power via X729 DC port.
Important Note: Please use a <span style ="color: red>high quality power supply with surge protection and overvoltage protection!!!</span> Otherwise it is easy to burn the DC chip!
Recommend to use [[PSU60 | Geekworm DC5521 12V/5A Power adapter US/EU plug]]
<span class="tb_red ">Warning about power supply:</span>
# Don't use that adjustable voltage power supply.
# Don't use the same power supply used on LED strips.
The above two are absolute garbage power supply, can not be used!!!
==Match Metal Case==
There is no match metal case for X729 now!
==Packing List==
* 1 x X729 V1.3 UPS Shield
* 2 x Jumper link Pitch 2.54mm
* 5 x M2.5 *4mm Screws
* 4 x M2.5 *7+6mm Spacers
* 4 x M2.5 *12mm Spacers
* 1 x M2.5 *20mm Spacers
==User Manual==
* [[X729-hardware]]: Provides some hardware parameter information
* How to get X729 work: [[X729-script]]
==PCB dimention==
X729 Dimensions source file (DXF): [[File:X729-PCB-v1.dxf]] - You can view it with Autodesk Viewer online
==FAQ==
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q: Can X829 extend X728-A2 (2 cells) / X708-A1(8 cells) battery holder?
</div>
<div class="mw-collapsible-content">
A: YES. You can connect X708-A1 / X728-A2 battery holder via [BAT: XH2.54 Port to External Battery] of X729 board. But please pay attention to the correct wiring method, if it is reversed, it will burn the X729.
</div>
</div>
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q: Does the X729 support SSD1327 OLED Display or LCD 12864?
</div>
<div class="mw-collapsible-content">
A: A: NO, the X729 does not support SSD1327 OLED Display or LCD 12864, only support ssd1306 OLED.
</div>
</div>
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q: Why does the message "This power supply is not capable of supplying 5A" appear??
</div>
<div class="mw-collapsible-content">
A: Please refer to [https://wiki.geekworm.com/X1201#FAQ X120x FAQ]
</div>
</div>
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[File:X729-acce+size.jpg|thumb|right|X729 V1.3]]
[[File:X729-size.jpg|thumb|right|X729 V1.3 Dimension]]
[[File:X728-Interface-Schematic.jpg|thumb|right|X729 V1.3 Interface Schematic]]
[[File:X729-IMG-4918-jumper.jpg|thumb|right|X729 V1.3 Jumper Cap Function]]
[[File:X729-IMG-4971.jpg|thumb|right|X729 V1.3 + OLED + External Momentary Switch]]
[[File:X729-Oled.jpg|thumb|right|X729]]
==Overview==
'''[NOTE]''': X729 supports also Raspberry Pi 5 hardware, the installation script is updated. Refer to [[X729-script]]
This X729 is an ultra-compact advanced uninterruptible power supply expansion board for all current models of the Raspberry Pi using a 40 pin header.
It provides Max. 5.1V 6000mA Power Backup for even the most demanding Raspberry Pi set ups, intelligent and safe power management, safe shutdown, auto power-on, battery reverse polarity protection circuit, AC power loss detection, battery capacity reading, low battery automatic shutdown, real- time clock(RTC), OLED display, Buzzer alarm, PWM Fan and Wide Voltage 6-24V Input.
The X729 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications. The X729 can also be used with the [[X825]] (2.5" HDD/SSD Shield) and [[X857]] / [[X862]] (MSATA/M.2 NGFF SSD shield) for safe data backup.
==For Use With==
* Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+ / 4 Model B
==SAFETY INSTRUCTIONS AND WARNINGS==
* <span style="color:red;">You must read these safety instructions and warnings before charging your batteries.
* <span style="color:red;">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
* <span style="color:red;">Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".
* <span style="color:red;">Do not mix and use old batteries and new batteries, or batteries with different brand names.
* <span style="color:red;">Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
* <span style="color:red;">When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X729 on the wood material or carpet and unattended.
* <span style="color:red;">Must keep the X729 away from children.
* Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebattery.com/en/
==Features==
'''UPS Output'''
* Provides continuous operations for up to 10~30hours (depending on battery type and qty used)
* Max 5.1V 6000mA Power Backup for even the most demanding RPi set ups
* Integrated TI INA219 12-bit current/voltage/power monitor
* Measure both output voltage and current draw over I2C with high precision
* Integrate Advanced Power MOSFET with Equivalent of 7mΩ RDS(ON) to reduce power loss
'''Battery Charging'''
* Supports 3000mA fast battery charging
* Battery over current protection and over voltage protection
* Protection of battery cell Reverse Connection
* Integrated Maxim's fuelgauge systems (Reading battery voltage and percentage over i2c)
* Onboard 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
* 18650 two cells lithium Ion holder
'''Power Input'''
* Integrated highefficiency stepdown DCDC converter
* '''Wide 6V to 24V operating input range'''
* Up to 95% Efficiency
* Up to 10A output current to keep 3A fast charging and powering Raspberry Pi at the same time
* Allows powering from a car, a solder pannel and other power sources
* Most common power input jack: 5.5x2.1mm
'''Power Management'''
* Onboard push button to control power on, safe shutdown, reboot and force shutdown
* Supports full poweroff from software
* Onboard blue LED shows the status of power on, reboot and shutdown
* AC power loss or power adapter failure detection (LED, GPIO and buzzer alarm)
* Jumper setting to enable Auto power on when power applied or restored
* Automatic safe shutdown when battery low (voltage programmable)
* Onboard buzzer alarm for power loss and low battery
* Ultralow standby power consumption to maximize battery life
* Advanced system powerpath management avoids batteries frequent charging and discharging
'''RTC'''
* Integrated Hardware Real Time Clock (RTC) with Battery BackUp
* Keeps track of the time while the Raspberry Pi is switched off
* Uses the most common DS1307 RTC real time clock
* Uses the 18650 battery to maintain the date and time no additional battery required
'''FAN'''
* Dedicated PWM cooling fan for Raspberry Pi
* Air flow up to 6.01CFM and maximum speed of 5000 RPM
* Smooth PWM adjustment provides a quiet experience
* RealTime fan speed reading
* Programmable temperature and fan speed
'''Misc'''
* Powers the Raspberry Pi via the 40pin header no additional cabling required
* Reserved 40pin stackable Header for AddOn Boards
* 1x4 Pin header and Screw holes for OLED display
* Works with all current models of the Raspberry Pi using a 40 pin header
* XH2.54 connectors for extra battery x1, 5V output x2
* PH2.04P for external power switch
==Specification==
* '''Power input: 6-24Vdc , ≥3A'''
* '''UPS output : 5.1V ±5% Max 6A'''
* UPS charging current: 2.3~3.2A
* Terminal Battery Voltage : 4.24V
* Battery Recharge Threshold : 4.1V
==How to Power==
* Please use '''6-24''' power adapter with DC5521 jack to power via X729 DC port.
Important Note: Please use a <span style ="color: red>high quality power supply with surge protection and overvoltage protection!!!</span> Otherwise it is easy to burn the DC chip!
Recommend to use [[PSU60 | Geekworm DC5521 12V/5A Power adapter US/EU plug]]
<span class="tb_red ">Warning about power supply:</span>
# Don't use that adjustable voltage power supply.
# Don't use the same power supply used on LED strips.
The above two are absolute garbage power supply, can not be used!!!
==Match Metal Case==
There is no match metal case for X729 now!
==Packing List==
* 1 x X729 V1.3 UPS Shield
* 2 x Jumper link Pitch 2.54mm
* 5 x M2.5 *4mm Screws
* 4 x M2.5 *7+6mm Spacers
* 4 x M2.5 *12mm Spacers
* 1 x M2.5 *20mm Spacers
==User Manual==
* [[X729-hardware]]: Provides some hardware parameter information
* How to get X729 work: [[X729-script]]
==PCB dimention==
X729 Dimensions source file (DXF): [[File:X729-PCB-v1.dxf]] - You can view it with Autodesk Viewer online
==FAQ==
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q: Can X829 extend X728-A2 (2 cells) / X708-A1(8 cells) battery holder?
</div>
<div class="mw-collapsible-content">
A: YES. You can connect X708-A1 / X728-A2 battery holder via [BAT: XH2.54 Port to External Battery] of X729 board. But please pay attention to the correct wiring method, if it is reversed, it will burn the X729.
</div>
</div>
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q: Does the X729 support SSD1327 OLED Display or LCD 12864?
</div>
<div class="mw-collapsible-content">
A: A: NO, the X729 does not support SSD1327 OLED Display or LCD 12864, only support ssd1306 OLED.
</div>
</div>
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q: Why does the message "This power supply is not capable of supplying 5A" appear??
</div>
<div class="mw-collapsible-content">
A: Please refer to [https://wiki.geekworm.com/X1201#FAQ X120x FAQ]
</div>
</div>
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]