Changes

Jump to navigation Jump to search

X630-A8

2,821 bytes added, 08:45, 8 December 2023
{{GD Template Impl}}
[[File:X630-A8-Compare-IMG-6284.jpg|thumb|right|X630-A8 V1.7 VS V1.8]]
[[File:X630-A8-IMG-4948.jpg|thumb|right|X630-A8-Front]]
[[File:X630-A8-IMG-4949.jpg|thumb|right|X630-A8-Rear]]
[[File:X630-A8-Standard-height-PCIe-bracket.jpg|thumb|right|X630-A8 Standard height PCIe Add-in Card I/O Bracket]]
[[File:X630-A8-IMG-4942-Interface.jpg|thumb|right|X630-A8]]
[[File:X630-A8-IMG-4940-1.jpg|thumb|right|X630-A8]]
[[File:01-X630-A8-acce.jpg|thumb|right|PiKVM-A8: X630+X630-A8 for Pi 4]]

==Overview==
<span style="color:red;">X630-A8 is an accessory for [[PiKVM-A8]] (Raspberry Pi 4 based KVM over IP, PCIe version),the complete kit or other Geekworm PiKVM version, please refer to '''[[PiKVM]]'''</span>

PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level access with no dependency on any remote ports, protocols or services!

PiKVM-A8 PCIe Version allows user to realize a [[PiKVM]] / KVM project with Raspberry Pi 4.

NO extral connection wire require, easy to assemble and use.

==Features==
* Designed especially for PiKVM ('''Raspberry Pi 4'''-based KVM over IP)
* Installs justs like any PCI card into a tower / desktop PC
* Fully compatiblie with PiKVM OS
* Reliable remote network access to servers and computers
* HDMI Full HD capture based on the TC358743 chip (from X630)
* OTG Keyboard & mouse; Mass Storage Drive emulation
* Hardware Real Time Clock (RTC) with CR1220 coin battery socket
* Equipped with cooling fan that allows the heat from your Raspberry Pi to dissipate
* Equipped with photocoupler to protect RPi GPIO pins from computer and ESD spikes
* '''PoE Supported''' – Power over Ethernet for simplified installation
* Also supports for powering via USB-C
* Reserves the PH2.04P connector for I2C OLED display

==Packing List==
* '''1 x X630-A8 V1.7 Expansion Board'''
* 1 x FPC cable (Length: 5cm)
* 1 x ATX Control Cable (Length: 52cm)
* 1 x Motherboard Internal USB 2.0 9-pin Female Header to TYPE-C USB OTG Cable (Length: 50cm)
* 1 x USB3.0 IDC to TYPE-C (Length: 45cm)
* 1 x Standard height PCIe Add-in Card I/O Bracket
* 4 x M2.5x12mm F/F Spacers
* 8 x M2.5x6mm Screws
* '''1x X630-A8-CAB V1.1 Camera Adapter board'''
* 2 x PM3x6mm Screws

<!--Add review function! -->
<comments />

<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->

[[Category:Product Manual]]
[[Category:Raspberry pi]]

Navigation menu