2,960
edits
Changes
Jump to navigation
Jump to search
X832
,{{GD Template Impl}}
[[File:X832-V1.2-Interface-indication.jpg|thumb|right|X832 V1.2 Interface]]
[[File:X832 V1.2-IMG-2878.jpg|thumb|right|X832 V1.2+Pi4]]
[[File:X832 V1.2-IMG-2888.jpg|thumb|right|X832 V1.2+X735+Pi4]]
[[File:X832 V1.2-IMG-2874-acce.jpg|thumb|right|X832 V1.2 Packing List]]
[[File:X832-interface.jpg|thumb|right|X832 V1.0 Interface]]
[[File:X832-packing.jpg|thumb|right|X832 V1.0 Packing List]]
[[File:X832-V1.0-PSU-NOTE.jpg|thumb|right|X832 V1.0+X735 V3.0+Pi4]]
[[File:X832-PSU-NOTE.jpg|thumb|right|X832 V1.0+X735 V2.5+Pi4]]
[[File:X832-Pi4.jpg|thumb|right|X832 V1.0+Switch + Pi 4]]
[[File:X832-case.jpg|thumb|right|X832-c1 Case + X735 + X832 V1.2 Shield]]
==X832 V1.2 is released==
X832 V1.2 is released on 26th October 2021;
Update:
* New add 4pcs test pins on the board to power Pi 4 with X832 via test pins. Not need the 2pin cable with use X832 V1.2 with Raspberry Pi 4 Only.
* DC jack is changed from DC5525 to DC5521. (DC5525 is compatible with DC5521.)
* Jumper function updated, please refer to photo [X832 V1.2 Interface].
'''[Note]:'''
X832 have two version: v1.2 and v1.0;
Due to the change of the height of the nut column, the corresponding housing is different.
[[X832-C1]] case is only for V1.2
[[X835-C1]] case is only for V1.0.
Note when X832 V1.2 use with <span style="color:red;">X735 V3.0</span>:
* 1. When use X832 with Raspberry Pi 4 only, use the <span style="color:red;">latching switch</span> to connect on X832 PWR SW port.
* 2. When use X832&X735 V3.0 with Raspberry Pi 4, use the <span style="color:red;">momentary switch</span> to connect on momentary switch port of X735 V3.0.
[[File:X832-V1.2+X735-V3.0-1.jpg|700px|X832 V1.2+X735 V3.0]]
Note when X832 V1.0 use with <span style="color:red;">X735 V3.0</span>:
[[File:X832 V1.0+X735 V3.0.jpg|700px|X832 V1.0+X735 V3.0]]
If you need a dual hard drive solution, you can refer to [[X880]](out of stock),[[NASPi Gemini 3.5]]
==Overview==
The X832 is a 3.5" SATA HDD expansion board focused on providing a bigger storage solution for your Raspberry Pi 4. The board is a great way to give a desktop look, as you can connect multiple external hard drivers without having them "hanging" from the USB ports of your SBC.
If you are looking for building a Media Center or even a Network-attached storage (NAS), the X832 is the right board for it. You will be able to separate one hard disk only for operating system and the rest for media, games...etc.
If you need dual 3.5" sata board, please refer to [[X835]]（A longer USB 3.0 A Male to A-Male Data cable is needed）.
==Features==
{| class="wikitable"
|-
| FOR USE WITH ||
Raspberry Pi 4 Model B
|-
| Operating System ||
All Raspberry Pi operating systems
|-
| KEY FEATURES ||
* Ideal storage solution for Raspberry Pi - 3.5" SATA HDD Shield
* Supports up to 14TB 3.5-inch SATA hard disk drives (HDD)
* Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying<ref>A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition</ref>
* Function to power the RPI via XH2.54 only needing a single power supply
* Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
* USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4
* Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac
* LED red indicator indicates powered status and blue indicator indicates drive status
* LED blue indicator indicates drive status
* Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed
* On-board XH2.54 power connectors allows to power other devices
* On-board PH2.0 connector allows to use external latching power swtich
* Mounting holes and standoffs provide mechanical stability of the Raspberry Pi and X825 assembly
* Fully compatible with [[X735]] for intelligent power management and cooling your Raspberry Pi
* Fully compatible with [[X710]] for intelligent power management and cooling your Raspberry Pi
|-
| SPECIFICATION ||
* <span style="color:red;font-weight:bold">Power supply: 12Vdc +/-5% , ≥3A</span>
* Ports & Connectors:
# DC jack - 5.5x2.1mm
# USB socket - USB 3.0 type A
# Power connector - XH2.54 2-pin
# SATA socket - 7+15P Female
* PCB Size 162.8mm x 101.6mm
|-
| NOTES ||
<references />
* For use with original power supply unit only
* Don't power your Raspberry Pi via the Pi's 40-pin header and Type-C power socket at the same time.
* Power supply is very important to the hard disk, so please use a high quality power adapter, or you may encounter problems such as not recognizing the hard disk.
|}
===X832 V1.2===
* 1 x X832 V1.2 HDD expansion board
* 1 x USB3.1 jumper
* 1 x 2-Pin Power Connection Wire
* 4 x Spacer F/F M3 x 31mm
* 4 x Screw PM2. 5 x 5 mm (to fix Pi 4)
* 8 x Screw TM3 x 8 mm(to fix HDD)
* Matching Case is [[X832-C1]]
===X832 V1.0===
* X832 V1.0 HDD expansion board x 1
* USB3.1 jumper x 1
* 2-Pin Power Connection Wire with Power daughter board x 1
* Spacer F/F M2.5 x 12mm x 4
* Spacer F/F M3 x 32mm x 4
* Screw PM2.5 x5mm x 8 (to fix Pi 4)
* Screw TM3 x 6mm x 8 (to fix HDD)
* Matching Case is [[X835-C1]]
==X832-C1==
[[X832-C1]] metal case is only for '''X832 V1.2''', and '''DON'T''' support X832 V1.0. Please refer to [[X832-C1]].
[[X835-C1]] metal case can support [[X835]] and '''X832 V1.0''' version. Please refer to [[X835-C1]].
[[File:X832-X735-case.jpg|700px|X832 V1.0+X735+case]]
Installation video for Raspberry Pi 4 + X835/X832 V1.0 + X735 V2.5 + X835-C1: https://youtu.be/8jdNf4sYQkQ
{{#ev:youtube|https://youtu.be/8jdNf4sYQkQ}}
==User Manual==
About USB boot please refer to [[Does the X825/X855 support USB boot]]
==FAQ==
Q: What to do if HDD is not recognized?
A: Please refer to [[How to View/Partition/Format/Mount HDD/SSD]]
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[File:X832-V1.2-Interface-indication.jpg|thumb|right|X832 V1.2 Interface]]
[[File:X832 V1.2-IMG-2878.jpg|thumb|right|X832 V1.2+Pi4]]
[[File:X832 V1.2-IMG-2888.jpg|thumb|right|X832 V1.2+X735+Pi4]]
[[File:X832 V1.2-IMG-2874-acce.jpg|thumb|right|X832 V1.2 Packing List]]
[[File:X832-interface.jpg|thumb|right|X832 V1.0 Interface]]
[[File:X832-packing.jpg|thumb|right|X832 V1.0 Packing List]]
[[File:X832-V1.0-PSU-NOTE.jpg|thumb|right|X832 V1.0+X735 V3.0+Pi4]]
[[File:X832-PSU-NOTE.jpg|thumb|right|X832 V1.0+X735 V2.5+Pi4]]
[[File:X832-Pi4.jpg|thumb|right|X832 V1.0+Switch + Pi 4]]
[[File:X832-case.jpg|thumb|right|X832-c1 Case + X735 + X832 V1.2 Shield]]
==X832 V1.2 is released==
X832 V1.2 is released on 26th October 2021;
Update:
* New add 4pcs test pins on the board to power Pi 4 with X832 via test pins. Not need the 2pin cable with use X832 V1.2 with Raspberry Pi 4 Only.
* DC jack is changed from DC5525 to DC5521. (DC5525 is compatible with DC5521.)
* Jumper function updated, please refer to photo [X832 V1.2 Interface].
'''[Note]:'''
X832 have two version: v1.2 and v1.0;
Due to the change of the height of the nut column, the corresponding housing is different.
[[X832-C1]] case is only for V1.2
[[X835-C1]] case is only for V1.0.
Note when X832 V1.2 use with <span style="color:red;">X735 V3.0</span>:
* 1. When use X832 with Raspberry Pi 4 only, use the <span style="color:red;">latching switch</span> to connect on X832 PWR SW port.
* 2. When use X832&X735 V3.0 with Raspberry Pi 4, use the <span style="color:red;">momentary switch</span> to connect on momentary switch port of X735 V3.0.
[[File:X832-V1.2+X735-V3.0-1.jpg|700px|X832 V1.2+X735 V3.0]]
Note when X832 V1.0 use with <span style="color:red;">X735 V3.0</span>:
[[File:X832 V1.0+X735 V3.0.jpg|700px|X832 V1.0+X735 V3.0]]
If you need a dual hard drive solution, you can refer to [[X880]](out of stock),[[NASPi Gemini 3.5]]
==Overview==
The X832 is a 3.5" SATA HDD expansion board focused on providing a bigger storage solution for your Raspberry Pi 4. The board is a great way to give a desktop look, as you can connect multiple external hard drivers without having them "hanging" from the USB ports of your SBC.
If you are looking for building a Media Center or even a Network-attached storage (NAS), the X832 is the right board for it. You will be able to separate one hard disk only for operating system and the rest for media, games...etc.
If you need dual 3.5" sata board, please refer to [[X835]]（A longer USB 3.0 A Male to A-Male Data cable is needed）.
==Features==
{| class="wikitable"
|-
| FOR USE WITH ||
Raspberry Pi 4 Model B
|-
| Operating System ||
All Raspberry Pi operating systems
|-
| KEY FEATURES ||
* Ideal storage solution for Raspberry Pi - 3.5" SATA HDD Shield
* Supports up to 14TB 3.5-inch SATA hard disk drives (HDD)
* Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying<ref>A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition</ref>
* Function to power the RPI via XH2.54 only needing a single power supply
* Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
* USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4
* Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac
* LED red indicator indicates powered status and blue indicator indicates drive status
* LED blue indicator indicates drive status
* Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed
* On-board XH2.54 power connectors allows to power other devices
* On-board PH2.0 connector allows to use external latching power swtich
* Mounting holes and standoffs provide mechanical stability of the Raspberry Pi and X825 assembly
* Fully compatible with [[X735]] for intelligent power management and cooling your Raspberry Pi
* Fully compatible with [[X710]] for intelligent power management and cooling your Raspberry Pi
|-
| SPECIFICATION ||
* <span style="color:red;font-weight:bold">Power supply: 12Vdc +/-5% , ≥3A</span>
* Ports & Connectors:
# DC jack - 5.5x2.1mm
# USB socket - USB 3.0 type A
# Power connector - XH2.54 2-pin
# SATA socket - 7+15P Female
* PCB Size 162.8mm x 101.6mm
|-
| NOTES ||
<references />
* For use with original power supply unit only
* Don't power your Raspberry Pi via the Pi's 40-pin header and Type-C power socket at the same time.
* Power supply is very important to the hard disk, so please use a high quality power adapter, or you may encounter problems such as not recognizing the hard disk.
|}
===X832 V1.2===
* 1 x X832 V1.2 HDD expansion board
* 1 x USB3.1 jumper
* 1 x 2-Pin Power Connection Wire
* 4 x Spacer F/F M3 x 31mm
* 4 x Screw PM2. 5 x 5 mm (to fix Pi 4)
* 8 x Screw TM3 x 8 mm(to fix HDD)
* Matching Case is [[X832-C1]]
===X832 V1.0===
* X832 V1.0 HDD expansion board x 1
* USB3.1 jumper x 1
* 2-Pin Power Connection Wire with Power daughter board x 1
* Spacer F/F M2.5 x 12mm x 4
* Spacer F/F M3 x 32mm x 4
* Screw PM2.5 x5mm x 8 (to fix Pi 4)
* Screw TM3 x 6mm x 8 (to fix HDD)
* Matching Case is [[X835-C1]]
==X832-C1==
[[X832-C1]] metal case is only for '''X832 V1.2''', and '''DON'T''' support X832 V1.0. Please refer to [[X832-C1]].
[[X835-C1]] metal case can support [[X835]] and '''X832 V1.0''' version. Please refer to [[X835-C1]].
[[File:X832-X735-case.jpg|700px|X832 V1.0+X735+case]]
Installation video for Raspberry Pi 4 + X835/X832 V1.0 + X735 V2.5 + X835-C1: https://youtu.be/8jdNf4sYQkQ
{{#ev:youtube|https://youtu.be/8jdNf4sYQkQ}}
==User Manual==
About USB boot please refer to [[Does the X825/X855 support USB boot]]
==FAQ==
Q: What to do if HDD is not recognized?
A: Please refer to [[How to View/Partition/Format/Mount HDD/SSD]]
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]