5,105
edits
Changes
Jump to navigation
Jump to search
The built-in LED light indicates the reading or writing status – no more guesswork again.x883 will replace [[X829]]
* LED blue indicator indicates each drive status
Pls Please use '''high quality''' power adapter, or the HDD/SSD may cannot be recognized.
X883
,no edit summary
This is an ultra-compact raspberry pi 4 dual 2.5 inch sata hdd/ssd storage board X883, it allows two 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds.
Note:
* Raspberry pi, 2.5" SATA SSDs/HDDs, power adapter are all not included
* Due to installation restrictions, please pay attention to the thickness of the hard drive2.5" SSD/HDD* As with all SSDs, new media SSD/HDD must be formatted before use
* Older SSD drives with less efficient flash media may not perform as well as newer drives
==Features==
* Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield, support USAP NOT trim
* Supports dual 2.5 SATA HDDs/SSDs working at the same time.* Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying* Function to power the RPI via XH2The newly designed USB connector can transmit more reliably.54 only needing a single power supply
* Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers
* Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac
* Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
* Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
* Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A6A, smart power mgmt)
==Power Supply Requirement==
Since X883 can install two 2.5-inch hard drives, it needs a high-quality power supply to provide enough current.
* Power supply: '''5Vdc''' +/-5% , ≥4A
* Ports & Connectors: DC jack - 5.5x2.5mm1mm * (Note: DC5525 Jack is compatible with DC5521, so you can also use the PSU with DC5525 Jack)
[[File:X883-How-to-Power.jpg|600px]]
==Packing List==
* 1 x X883 Shield (Support Dual 2.5 inch SATA HDD/SSD)
* 1 x Carrier Board X883-A1 (To mount raspberry pi on X883)
* 1 x USB 3-D Connector
* 1 x 2-Pin Power Connection Wire