Changes

Jump to navigation Jump to search

T208

122 bytes removed, 12:03, 10 August 2020
| OPERATING SYSTEM || All operating systems
|-
| KEY FEATURES || "Smart and powerful Uninterruptible Power Supply (UPS)|-| Provides continuous operations for up to 10~30hours (depending on battery type and qty used)|-| Max 5.1V 8000mA Power Backup for even the most demanding Jetson Nano set ups|-| 6-cell 18650 lithium Ion holder|-| Can work with 1/2/3/4/5/6 18650 lithium Ion batteries|-| Supports 3A fast battery charging|-| Integrated battery protection circuit|-| Integrated over current protection and over voltage protection|-| Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c)|-| Integrated TI's 10-A fully-integrated synchronous boost converter|-| Intelligent automatic charging and discharging|-| On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%|-| On-board blue LED show the status of power on/off|-| Intelligent and safe power management|-| On-board push button to control power on /off - Press-ON, Hold the button pressed at least 3s -OFF)|-| AC power loss or power adapter failure detection (LED and GPIO indication)|-| Automatic powering off after system shutdown using the GUI|-| Optional to enable Auto power on when power applied or restored|-| Ultra-low standby power consumption of μA to maximize battery life|-| Integrated IN-to-SYS pass-through path to pass the input voltage to the system|-| Operate in both charge mode and boost mode to allow full system management and battery power management|-| Advanced system power path management avoids frequent charging and extend battery life|-| Advanced system power path management allows 3A fast charging and powering Jetson Nano at the same time|-| Powers the Jetson Nano via the 40-pin header - no additional cabling required|-| Power input jack (5.5*2.5mm) and XH2.54 connector convenient for power input|-| On-board PH2.0 connector allows to connect external power switch and DIY your perfect case|-| On-board XH2.54 power output connectors allow to power other devices|-| Mounting holes and standoffs provide mechanical stability of the Jetson Nano and T208 assembly|-| "
|-
| SPECIFICATIONS || "Power input?: 5Vdc ±5%, ≥4A
| "
|}
 
==Features==
{| class="wikitable"

Navigation menu