CommentStreams:39823785454e7117e08edc65fdd1b63d

Hello! I have a problem: 1- Feed the UPS and connect a Raspberry Pi. Everything works and indicates that the battery is charging (red LED flashes) - OK. 2- After a while, the red led stays fixed (battery charged) - OK. 3- After, the battery begins to discharge, but the red LED remains fixed and the charging is no longer started, so the battery is completely discharged and the Raspberry Pi stops - KO. All this with the 5V power supply (micro USB) permanently connected to the UPS. I can only avoid this if, when the battery is being discharged, I disconnect the 5V power supply (micro USB), wait for the red LED to turn off, and turn it on again. I think that in point 3, it should automatically start charging the battery again, right? Thanks and best regards