5,095
edits
Changes
Jump to navigation
Jump to search
Please use '''high quality''' power adapter, or the HDD/SSD may cannot be recognized[[File:X883-How-to-Power.jpg|600px]]
[[File:X883-How-to-Power.jpg|600px]]
X883
,[[File:X883-Packing-List.jpg|thumb|right|X883 Packing List]]
[[File:X883-Interface-Schematic.jpg|thumb|right|X883 Interface Schematic]]
[[File:X883-IMG-2492.jpg|thumb|right|X883]]
[[File:X883-with-pi-4.jpg|thumb|right|X883 with pi 4]]
[[File:X883-with-pi-4-X735.jpg|thumb|right|X883 with pi 4 & X735]]
[[File:X883-PCB.png|thumb|right|X883 PCB size]]
==Overview==
* Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 6A, smart power mgmt)
==How to Power Supply Requirement==Since X883 can install two 2.5-inch hard drives, it needs a high-quality power supply to provide enough current.<span style="color:red">Please use high quality power adapter that with inner protection, the low quality PSU may damage the X883 board and not recognized the HDD/SSD.</span>
* Power supply: '''5Vdc''' +/-5% , ≥4A
* Ports & Connectors: DC jack - 5.5x2.1mm
* (Note: DC5525 Jack is compatible with DC5521, so you can also use the PSU with DC5525 Jack)
==Packing List==
* 1 x X883 Shield (Support Dual 2.5 inch SATA HDD/SSD)
==User Manual==
* How to Run Raspberry Pi 4 or 3 Off an SSD or Flash Drive: [[Does the X825/X855 support USB boot]]
* Tutorial – How to Initialize, Partition and Format a Brand New SSD in Windows: [[File:Tutorial_Initalize_New_SSD.pdf]]
* [https://www.addictivetips.com/ubuntu-linux-tips/set-up-openmediavault-on-raspberry-pi-4/ How to set up OpenMediaVault on Raspberry Pi 4]
Some Tips
*[[Properly Mount USB Storage on Raspberry Pi]]
*[[Auto Mount an NTFS USB Drive on Raspberry Pi]]
* [https://github.com/raspberrypi/firmware/issues/1515 Difficulty booting from SSD drive]
* How to build a Raspberry Pi NAS: https://youtu.be/gyMpI8csWis
==PCB dimention==
Dimensions source file (DXF): [[File:X883-V1.2-DWG.dxf]] - You can view it with Autodesk Viewer online
==FAQ==
Q1: What to do if HDD/SSD is not recognized?
A: Please refer to [[How to View/Partition/Format/Mount HDD/SSD]]