393
edits
Changes
Jump to navigation
Jump to search
X882
,==Features==
{| class="wikitable"
|-
| FOR USE WITH ||
Raspberry Pi 4 Model B
|-
| Operating System ||
All Raspberry Pi operating systems
|-
| KEY FEATURES ||
*Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield, supports UASP NOT trim
*Supports dual 2.5 SATA HDDs/SSDs working at the same time
*Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying
*Function to power the RPI via XH2.54 only needing a single power supply
*Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers
*Integrated USB 3.1 Gen 1 Hub Controller
*USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4
*Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac
*Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed
*Specially-made X882-A1 connector to connect with Raspberry Pi - power Pi4 without additional cables
*Ultra-compact design allows for ease of use two HDD/SSD with Raspberry Pi 4
*LED blue indicator（HDD1,HDD2） indicates each drive status
*Support auto power on function
*Support connecting 3pin PWM Fan
*On board switch with LED light：
*Press button switch to turn on
*Press button switch and hold for 1~2 seconds to reboot
*Press button switch and hold for 3 seconds to implement safe shutdown
*Press button switch and hold for more than 8 seconds to force shutdown
|-
| SPECIFICATION ||
* <span style="color:red;font-weight:bold">Power supply: 5.1Vdc +/-5% , ≥4A</span>
* Ports & Connectors:
# DC jack - 5.5x2.1mm (DC5525 Jack is compatible with DC5521, you can also use the PSU with DC5525 Jack)
# Type-C port（Geekworm Type-C 5V 4A 20W power supply is recommended.）
# USB socket - USB 3.0 type A
# Power connector - 5V Out XH2.54 2-pin
# PWM Fan port 3-pin
# SATA socket - 7+15P Female
* PCB Size 160mm x 107mm
|-
| Power Supply Requirement ||
*Please use high quality power adapter, or the HDD/SSD may cannot be recognized.
*Since X883 can install two 2.5-inch hard drives, it needs a high-quality power supply to provide enough current.
| NOTES ||
<references />
* *Due to installation restrictions, please pay attention to the thickness of 2.5" SSD/HDD.
*We do not recommend using Samsung hard drives,Please use hard drives of other brands.
*As with all SSDs, new SSD/HDD must be formatted before use.
*Older SSD drives with less efficient flash media may not perform as well as newer drives.
*A microSD card is required for forceing the Raspbian OS to use the HDD/SSD for its "root" partition
*Additional USB3.0 A Male to A Male cable is required (not supplied)
* <span style="color:red;font-weight:bold">Do not power your Raspberry Pi via the Pi's 40-pin header and Type-C USB socket at the same time.</span>
|}
==Power Supply Requirement==