5,142
edits
Changes
Jump to navigation
Jump to search
【RAID setup and Jumper setting】 ＊'''Warning''' : Please backup your data before setup and switch, otherwise you maybe lost your data. 1. Install the HDDs 2. Please connect the X882 Refer to your PC or Raspberry Pi board and keep power on 3. Switch RAID mode* Set the switch button [[How to your preferred RAID mode(PM/RAID 0/RAID 1/SPAN) as per the RAID illustration table.* Press the '''SET''' button for about 5 seconds, and release it till the blue LED indicators starts flashing.* After RAID mode changed, please confirm that the PC can recognize the disk(s) properly and shows the right capacity. or you can run the fdisk -l command to view the hard drive on raspberry pi OS when you connect x880 to raspberry pi board: fdisk -lYou can found two hard drives if you select 'clear raid mode'(this is PM model) or You found only one hard drive if you select the RAID0/RAID1 model 4. Set CLEAR RAID mode (PM, factory default setup) * Press the SET button for about 5 seconds then and release it till blue LED indicators starts flashing.* After above processes, the setup for CLEAR Configure RAID is done.Setting]]
QQ1. Why did the second HDD is not recognized? You found only one hard drive if you select the RAID0/RAID1 mode. Please '''exit the RAID mode''' and check again after '''entering the PM mode(clear raid mode)'''. More details please refer to '''Set CLEAR RAID mode''' of [[NASPi_Gemini_2.5#How_to_configure_RAID|How to configure RAID]] Q2: What to do if HDD/SSD is not recognized?
X882
,{{GD Template Impl}}
[[File:X882 V2.0-INTERFACE.jpg|thumb|right|X882 V2.0Interface Indication]][[File:X882-IMG-5241.jpg|thumb|right|Connection diagram of GPIO connector and OLED screen]][[File:X882-V2.0-How to Power.jpg|thumb|right|How to Power X882 V2.0&Pi4]][[File:X882-V2.0-IMG-5034-acce.jpg|thumb|right|X882 V2.0 Packing List]]
[[File:IMG-3647-Packing_List.jpg|thumb|right|X882 V1.3 Packing List]]
[[File:X882-V1.3-socket-indication.jpg|thumb|right|X882 V1.3 Interface Indication]]
[[File:IMG_3492-How_to_Power.jpg|thumb|right|How to Power X882 V1.3&Pi4]]
==Overview==
<span style="color:red;font-weight:bold">X882 is not sold seperately, we have designed a case for X882 and sold it as a set, please refer to [[NASPi Gemini]]</span>
Update History:
In December 2022, the X882 V1.3 has been updated to X882 V2.0, remove the USB-C port on X882 V1.3, and update DC 5V power in to wide voltage input DC6-18V power in.
The new version completely solve the issue of I/O error.
[[File:X882-Compare.jpg|700px|X882 V2.0 VS X882 V1.3]]
==Features==
|-
| SPECIFICATION ||
* <span style="color:red;font-weight:bold">Power supply: 5.1Vdc +/-5% , ≥4A<(For X882 V1.3 Version)* Power supply: 6-18Vdc +/span>-5% , ≥4A(For X882 V2.0 Version)
* Ports & Connectors:
# DC jack - 5.5x2.1mm (DC5525 Jack is compatible with DC5521, you can also use the PSU with DC5525 Jack)
== Raid setup==
==Matching Metal Case==
X882-C1 metal case with 4010 PWM cooling fan will meet , you soon, it is worth your expectation!can refer to [[NASPi Gemini]].
==Packing List==
* 1 x X882 V1.3 Dual 2.5'' SATA HDD Shield(V2.0 or V1.3 Version)
* 1 x X882-A1 Connector
* 1 x USB Connector
For better system compatibility & performance, Please format your HDD/SSD to Ext4 file system.
* X882 Dimensions source file (DXF): [[File:X882-V2.1.dxf|X882 Dimensions source file (DXF)]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online
==Document==
==FAQ==
A: Please refer to [[How to View/Partition/Format/Mount HDD/SSD]]