5,152
edits
Changes
Jump to navigation
Jump to search
X880
,NOTE:
# The current X880 does not have standby function.(August 2022)
# Please use the same type of hard drive,HDD+HDD or SSD+SSD； an error will be reported when using SSD+HDD.
# We do not recommend using Samsung hard drives,Please use hard drives of other brands.
# Not supported for use with the [[X735]] Power Management Board or X708/X728 UPS board.
* After RAID mode changed, please confirm that the PC can recognize the disk(s) properly and shows the right capacity.
or you can run the <code>fdisk -l </code> command to view the hard drive on raspberry pi OS when you connect x880 to raspberry pi board:
fdisk -l
You can found two hard drives if you select 'clear raid mode'(this is PM model)
A: Please refer to [[How to View/Partition/Format/Mount HDD/SSD]]
Q2: Does the X880 work on Raspberry Pi 3 B+/3B?
A: Sorry, the X880 does '''not support''' Raspberry Pi 3 B+/3B.
Q3: Does the X880 support to use with UPS HAT?
A: No, the X880 does '''not support''' to use with UPS HAT.
Q4: What to do if HDD/SSD is not recognized?
A: Please refer to [[How to View/Partition/Format/Mount HDD/SSD]]
<!--Add review function! -->