5,152
edits
Changes
Jump to navigation
Jump to search
X880
,NOTE:
# The current X880 does not have standby function.(August 2022)
# Please use the same type of hard drive,HDD+HDD or SSD+SSD； an error will be reported when using SSD+HDD.
# We do not recommend using Samsung hard drives,Please use hard drives of other brands.
# Not supported for use with the [[X735]] Power Management Board or X708/X728 UPS board.
Please note: x880 is a hardware RAID. It supports RAID at the hardware level and does not require any software configuration. This has nothing to do with software, even if OMV does not support RAID settings;
'''Important!!'''
For better system compatibility & performance, Please format your HDD/SSD to Ext4 file system.
==Features==
* After RAID mode changed, please confirm that the PC can recognize the disk(s) properly and shows the right capacity.
or you can run the <code>fdisk -l </code> command to view the hard drive on raspberry pi OS when you connect x880 to raspberry pi board:
fdisk -l
You can found two hard drives if you select 'clear raid mode'(this is PM model)
A: Please refer to [[How to View/Partition/Format/Mount HDD/SSD]]
Q2: Does the X880 work on Raspberry Pi 3 B+/3B?
A: Sorry, the X880 does '''not support''' Raspberry Pi 3 B+/3B.
Q3: Does the X880 support to use with UPS HAT?
A: No, the X880 does '''not support''' to use with UPS HAT.
Q4: What to do if HDD/SSD is not recognized?
A: Please refer to [[How to View/Partition/Format/Mount HDD/SSD]]
<!--Add review function! -->