5,150
edits
Changes
Jump to navigation
Jump to search
X880
,* Supports installation of X880-A1 A2 2.5 "/ 3.5" SATA SSD/HDD Shield
== Raid setupSetting==
[About Raid]
4. Set CLEAR RAID mode (PM, factory default setup)
* Press the SET button for about '''5 seconds ''' then and release it till blue LED indicators starts flashing.
* After above processes, the setup for CLEAR RAID is done.
'''[NOTE]'''
Once you set the RAID mode successfully, you need to partition&format&mount the hdd/ssd, so that it can be recognized by your Raspberry Pi OS. please refer to [[How to View/Partition/Format/Mount HDD/SSD]]
==Power Supply Requirement==