5,154
edits
Changes
X876
,<div class="mw-collapsible-content">
A: It is recommended that you troubleshoot the following points:
# Check if you are using the correct SSD, X876 supports M.2 NVME ssd only but not sata/ngff SSD, please refer to the picture below: [[File:X876-Supported-SSD.jpg|800px600px]]# Use the '''black USB 3.0 cable ''' in the box to replace the USB connector to check if the USB connector is faulty.
# Check the pogo pins on the X876 board are damaged.
# Startup the Raspberry Pi and enter the teminal window, then run the command <code>lspci</code> to check if there is an x876 device? (or send the result to support@geekworm.com)