2,869
edits
Changes
Jump to navigation
Jump to search
AAnswer: 1. Please use latching switch only and not use momentary switch; The jumper socket fitted for "PWR ON" must be removed when using an external latching power switch. 2.All the board, cable, jumper connections must be under power-off station.
Answer: Whatever to use with X735 or not, the PSU must be connected to X835 DC 12V IN port, not X735 or Raspberry Pi.
Answer:
Answer: The "L-SW" pin must be shorted when use X735 latching switch port to connect an external latching switch.
Answer: Connect the power switch to X735 "Latching Switch" port when use with X735.
X835
,1. How to use external power switch for X835 board?
2. What power supply requires for X835?
3. Where to connect the power supply?
4.How to connect the X735 with X835?
Connect the 2pin power cable from X835 "5V OUT" to X735 "5V IN".
Connect another 2 pinc power cable from X835 "PWR Ctrl" to X735 "5V OUT".
5. How to set the Jumper cap on X735?
6. How to connect the power switch in the X835 metal case?
<!--增加评论功能！ -->