[[File:X832-Pi4.jpg|thumb|right|X832 V1.0+Switch + Pi 4]]
[[File:X832-case.jpg|thumb|right|X832-c1 Case + X735 + X832 V1.2 Shield]]
Due to the change of the height of the nut column, the corresponding housing is different.
[[X832#X832-C1]] case is only for V1.2
[[X835-C1]] case is only for V1.0.
Note when X832 V1.2 use with <span style="color:red;">X735 V3.0</span>:* 1. When use X832 with Raspberry Pi 4 only, use the <span style="color:red;">latching switch</span> to connect on X832 PWR SW port.* 2. When use X832&X735 V3.0 with Raspberry Pi 4, use the <span style="color:red;">momentary switch</span> to connect on momentary switch port of X735 V3.0.[[File:X832-V1.2+X735-V3.0-1.jpg|700px|X832 V1.2+X735 V3.0]] Note when X832 V1.0 use with <span style="color:red;">X735 V3.0</span>: [[File:X832 V1.0+X735 V3.0.jpg|700px|X832 V1.0+X735 V3.0]] If you need a dual hard drive solution, you can refer to[[X880]](out of stock),[[NASPi Gemini 3.5]]
* 1 x USB3.1 jumper* 1 x 2-Pin Power Connection Wire* 4 x Spacer F/F M3 x 31mm8 x Screw PM3 x 8* 4 x Screw PM2. 5 x 5mm (to fix Pi 4)* 8 x Screw TM3 x 8 mm(to fix HDD)* Matching Case is [[X832#X832-C1]]
===X832 V1.0===
* X832 V1.0 HDD expansion board x 1 * USB3.1 jumper x 1 * 2-Pin Power Connection Wire x 1 * with Power daughter board x 1
* Spacer F/F M2.5 x 12mm x 4
* Spacer F/F M3 x 32mm x 4 * Screw M2PM2.5 x5mm x 8 (to fix Pi 4) * Screw M3 TM3 x 8mm 6mm x 8(to fix HDD)
* Matching Case is [[X835-C1]]
==X832-C1==
[[X832-C1 ]] metal case is only for '''X832 V1.2''', and '''DON'T''' suuport support X832 V1.0. Please refer to [[X832-C1]].
[[X835-C1]] metal case can support [[X835]] and '''X832 V1.0''' version. Please refer to [[X835-C1]].