Difference between revisions of "X825v"
Jump to navigation
Jump to search
Line 2: | Line 2: | ||
==Overview== | ==Overview== | ||
+ | The X825v V2.0 Version is updated from [[X825]] V1.5 Version. | ||
+ | |||
+ | ① Add 4 test pins to achieve powered between X825 V2.0 and Pi4 without additional cable. But just noly power from the PI4's Type-C port ,NOT support power via X825v DC JACK. | ||
+ | |||
+ | ② Removed the on-board power button and 4-pin external switch interface. You can connect the X735 board for software safe shutdown & power management . | ||
+ | |||
+ | ③ Use more shorter USB 3.0 jumper/connector, so the matching metal case is X825-C8 NOT X825-C6. | ||
==Features== | ==Features== |
Revision as of 19:50, 18 October 2021
Overview
The X825v V2.0 Version is updated from X825 V1.5 Version.
① Add 4 test pins to achieve powered between X825 V2.0 and Pi4 without additional cable. But just noly power from the PI4's Type-C port ,NOT support power via X825v DC JACK.
② Removed the on-board power button and 4-pin external switch interface. You can connect the X735 board for software safe shutdown & power management .
③ Use more shorter USB 3.0 jumper/connector, so the matching metal case is X825-C8 NOT X825-C6.
Features
- Supports upto 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) (Theoretically it can work with 6TB or 8TB as well. But actually we do not test the X825 board with 6tb or 8tb HDD, you can have a try.)
- Ideal storage solution for Raspberry Pi 4 Model B
- UASP supported for Raspberry Pi 4, NOT support TRIM
- Use a shorter USB 3 connector to reduce the overall height
- Use new 4pcs test pins to power each other with raspberry pi 4, no additional wire required
- LED blue indicator indicates drive status
- USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller
- Quick file transfer with high-speed USB 3.1 connectivity from a PC or a Mac
User Manual
Packing List
- 1 x X825v V2.0 2.5" SATA HDD Shield
- 1 x USB 3.1 connector
- 2 x M3x6 Screws
- 8 x M2.5x6 Screws
- 4 x Spacer F/F M2.5x14mm
Enable comment auto-refresher