Difference between revisions of "X825v"
Jump to navigation
Jump to search
Line 17: | Line 17: | ||
==Packing List== | ==Packing List== | ||
− | + | * 1 x X825v V2.0 2.5" SATA HDD Shield | |
+ | * 1 x USB 3.1 connector | ||
+ | * 2 x M3x6 Screws | ||
+ | * 8 x M2.5x6 Screws | ||
+ | * 4 x Spacer F/F M2.5x14mm | ||
==FAQ== | ==FAQ== |
Revision as of 19:46, 18 October 2021
Overview
Features
- Supports upto 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) (Theoretically it can work with 6TB or 8TB as well. But actually we do not test the X825 board with 6tb or 8tb HDD, you can have a try.)
- Ideal storage solution for Raspberry Pi 4 Model B
- UASP supported for Raspberry Pi 4, NOT support TRIM
- Use a shorter USB 3 connector to reduce the overall height
- Use new 4pcs test pins to power each other with raspberry pi 4, no additional wire required
- LED blue indicator indicates drive status
- USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller
- Quick file transfer with high-speed USB 3.1 connectivity from a PC or a Mac
User Manual
Packing List
- 1 x X825v V2.0 2.5" SATA HDD Shield
- 1 x USB 3.1 connector
- 2 x M3x6 Screws
- 8 x M2.5x6 Screws
- 4 x Spacer F/F M2.5x14mm
Enable comment auto-refresher