5,142
edits
Changes
Jump to navigation
Jump to search
* Replace the latching switch connector with a XH2.54 5V OUT connector.[[File:X735-V30-V25-compare-1.jpg|800px]]
* [https://github.com/geekworm-com/x730-script Github]
X735
,{{GD Template Impl}}
[[File:X735-V3.0-01.jpg|thumb|right|X735 V3.0 Packing List]]
[[File:X735-V2.5-01.jpg|thumb|right|X735 V2.5 Packing List]]
[[File:X735-V2.5-IMG-9568.jpg|thumb|right|X735 V2.5]]
[[File:X735-V2-IMG 6726.jpg|thumb|right|X735 V2.0]]
[[File:X735-V2-IMG-6538.jpg|thumb|right|X735 V2.0]]
[[File:X735-IMG-5912.jpg|thumb|right|X735V1.0]][[File:X735-IMG-5914.jpg|thumb|right|X735V1.0]]
[[File:X735-IMG-5915.jpg|thumb|right|X735]]
[[File:X735 and X820 board.jpg|thumb|right|X735+X820 board]]
==Foreword==
X735 V3.0 V2.5 supports Raspberry Pi 5 hardware also. There are 5 version of X735: V1V3.0, V2.05, V2.1, V2.5 V30, V1.0:
<span style="color:red;">Version 3.0</span>(Updated on Mar. , 2022):
* Support width voltage DC 6V-30V input (only DC port), you still can use 5V PSU via type-c or micro usb port.
* Remove the latching switch connector(the latching switches are no longer supported.), and add a XH2.54 5V OUT connector;
* Replace the L-SW jumper with FAN FS jumper to control the PWM fan;
Because we found that there are some beginner who don't know how to install the script to make the PWM fan run, or the installation script doesn't support 3rd party OS, at this time, you just need to remove the FAN FS jumper, the PWM fan will run at full speed.
'''Some new features of X735 v2.5:'''
The X735 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40-pin header. It provides intelligent and safe power management, safe shutdown and full poweroff through software, an automatic temperature controlled fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The X735 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.
At the same time, x735 reserve two kind of a 4PIN power switch (momentary switch and latching switch) port, you can connect the additional power switch to safe control the power on/power off;
==Important Note==
* Micro USB; Compatible with your original mirco usb power adapter
* XH2.54 2Pin Cable: This is a flexible power supply
Since X735 V3.0 is wide voltage input, so we have some advise to X735 V3.0:
Different voltages have different rated currents. Generally speaking, the lower the voltage, the larger the required rated current. For example, when the voltage is 12V, the rated current of 2A is enough, if the voltage is 36V, 1A is enough, but if the voltage is 6V, the rated current should be more than 3A.
That is to say, the output power of the power adapter should be greater than the normal working power of the Raspberry Pi;
Generally speaking, we require the output power of the power adapter to be above 20W;
==Function Description==
===X735 V3.0 ===
Refer to [http://www.suptronics.com/miniPCkits/x735_v3.0-hardware.html |X735 V3.0 Hardware]
===X735 V2.5 ===
Refer to [[X735 V2.5 Hardware]]
Please refer to [[X735 V1.0 Hardware]]
==Installation GuidePCB dimention==* X735 v3.0 Dimensions source file (DXF): [[File:X735-PCB-v3.0.dxf|X735 v3.0 Dimensions source file (DXF)]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online ==User Manual==
===Installation Video===
* Geekworm Video(X735 with X820): https://youtu.be/I1nnjh9HvGI
{{#ev:youtube|https://youtu.be/I1nnjh9HvGI}}
===X735 V1.0 Installation Guide ManualSoftware Installtion===[[File:X735安装说明You must install the script to enable PWM fan running and safe shutdown function.jpg|X735 installation guide]]
Please choose a different script according to the version number of X735 shield==Document=====for Version 3.0/2.5====
Please refer to [[X735 V2.5 Software]]
====for Version 2.1 or more low version====
Please refer to '''[http://www.suptronics.com/miniPCkits/x735-hardware.html Hardware]''' and '''[http://www.suptronics.com/miniPCkits/x730-software.html Software]''' and read them and follow the instructions before ask any questions, thank you!
The safe shutdown script is same with X730.
We test this shell script base official Raspbian '2018-11-13-raspbian-stretch.img' version;other operating systems not be tested!
<pre>
x730off
</pre>
===X735 V1.0 Installation Guide Manual===
[[File:X735安装说明.jpg|X735 installation guide]]
==Some Tips==
1. https://github.com/geekworm-com/x735-v2.5/issues/6
"/Home/pi/x735-v2.5" indicates the path where pwn_fan_control.py is located.
<span style='color:red;'>15. Is there any way to check or verify if X735 is physically connected to the Raspberry Pi?
* A: GPIO17=1, X735 connected, GPIO17=0 , X735 discontinued.
<!--增加评论功能！ -->