1,823
edits
Changes
Jump to navigation
Jump to search
X729
,==Features==
Smart and powerful Uninterruptible Power Supply (UPS)
'''UPS Output'''
* Provides continuous operations for up to 10~30hours (depending on battery type and qty used)
* Max 5.1V 6000mA Power Backup for even the most demanding RPi set ups
* Integrated TI INA219 12-bit current/voltage/power monitor
* Measure both output voltage and current draw over I2C with high precision
* Integrate Advanced Power MOSFET with Equivalent of 7mΩ RDS(ON) to reduce power loss
'''Battery Charging'''
* Supports 3000mA fast battery charging
* Battery over current protection and over voltage protection
* Protection of battery cell Reverse Connection
* Integrated Maxim's fuelgauge systems (Reading battery voltage and percentage over i2c)
* Onboard 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
* 18650 two cells lithium Ion holder
'''Power Input'''
* Integrated highefficiency stepdown DCDC converter
* Wide 6V to 24V operating input range
* Up to 95% Efficiency
* Up to 10A output current to keep 3A fast charging and powering Raspberry Pi at the same time
* Allows powering from a car, a solder pannel and other power sources
* Most common power input jack: 5.5x2.1mm
'''Power Management'''
* Onboard push button to control power on, safe shutdown, reboot and force shutdown
* Supports full poweroff from software
* Onboard blue LED shows the status of power on, reboot and shutdown
* AC power loss or power adapter failure detection (LED, GPIO and buzzer alarm)
* Jumper setting to enable Auto power on when power applied or restored
* Automatic safe shutdown when battery low (voltage programmable)
* Onboard buzzer alarm for power loss and low battery
* Ultralow standby power consumption to maximize battery life
* Advanced system powerpath management avoids batteries frequent charging and discharging
'''RTC'''
* Integrated Hardware Real Time Clock (RTC) with Battery BackUp
* Keeps track of the time while the Raspberry Pi is switched off
* Uses the most common DS1307 RTC real time clock
* Uses the 18650 battery to maintain the date and time no additional battery required
'''FAN'''
* Dedicated PWM cooling fan for Raspberry Pi
* Air flow up to 6.01CFM and maximum speed of 5000 RPM
* Smooth PWM adjustment provides a quiet experience
* RealTime fan speed reading
* Programmable temperature and fan speed
'''Misc'''
* Powers the Raspberry Pi via the 40pin header no additional cabling required
* Reserved 40pin stackable Header for AddOn Boards
* 1x4 Pin header and Screw holes for OLED display
* Works with all current models of the Raspberry Pi using a 40 pin header
* XH2.54 connectors for extra battery x1, 5V output x2
* PH2.04P for external power switch
==Specification==
* Power input: 624Vdc ±5%, ≥3A
* UPS output : 5.1V ±5% Max 6A
* UPS charging current: 2.3~3.2A
* Terminal Battery Voltage : 4.24V
* Battery Recharge Threshold : 4.1V
==Packing List==