Changes

Jump to navigation Jump to search

X728

173 bytes added, 15:15, 15 April 2020
no edit summary
==SAFETY INSTRUCTIONS AND WARNINGS==
* <span style="color:red;">You must read these safety instructions and warnings before charging your batteries. * <span style="color:red;">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly. * <span style="color:red;">Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-". * <span style="color:red;">Do not mix and use old batteries and new batteries, or batteries with different brand names. * <span style="color:red;">Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first. * <span style="color:red;">When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X728 on the wood material or carpet and unattended. * <span style="color:red;">Must keep the X728 away from children.
==Features==
* On-board XH2.54 power output connector allows to power other devices
* Reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards
 
===SPECIFICATION===
* Power supply via Type-C socket : 5Vdc ±5%, ≥3A, Via DC power jack : 5Vdc ±5%, ≥4A
* UPS output : 5.1V ±5% Max 8A
* UPS charging current: 2.3~3.2A
* Terminal Battery Voltage : 4.24V
* Recharge Threshold : 4.1V
<span style="color:red;font-weight:bold">Note:
* <span style="color:red;font-weight:bold">Do not apply power to your Raspberry Pi via the Micro USB socket or Type-C socket.
* <span style="color:red;font-weight:bold">Do not use 18650 battery with built-in protection circuit
==X728-A1==
* Ideal solution to increase battery capacity
* Integrated battery protection circuit
 
===SPECIFICATION===
* Power supply via Type-C socket : 5Vdc ±5%, ≥3A, Via DC power jack : 5Vdc ±5%, ≥4A
* UPS output : 5.1V ±5% Max 8A
* UPS charging current: 2.3~3.2A
* Terminal Battery Voltage : 4.24V
* Recharge Threshold : 4.1V
<span style="color:red;font-weight:bold">Note:
* <span style="color:red;font-weight:bold">Do not apply power to your Raspberry Pi via the Micro USB socket or Type-C socket.
* <span style="color:red;font-weight:bold">Do not use 18650 battery with built-in protection circuit
 
==Packing List==
* Spacer F/F M2.5 *20mm x 4
* Jumper link Pitch 2.54mm x 3
 
==Document==

Navigation menu