1,823
edits
Changes
Jump to navigation
Jump to search
X708
,==Features==
{| class="wikitable"
|-
| FOR USE WITH ||
Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+ / 4 Model B
|-
| Operating System ||
* Raspbian Stretch
* Safe shutdown function tested for Raspbian, other operating systems to be tested and advised
|-
| KEY FEATURES ||
<span style="font-weight:bold">Smart and powerful Uninterruptible Power Supply (UPS)</span>
* Provides continuous operations for up to 10~30hours (depending on battery type and qty used)
* Max 5.1V 8000mA Power Backup for even the most demanding RPi set ups
* Supports 2A/3A fast battery charging
* Integrated over current protection and over voltage protection
* Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c)
* Integrated 10-A fully-integrated synchronous boost converter
* Intelligent automatic charging and discharging
* Operate in both charge mode and boost mode to allow full system management and battery power mgt
* Integrated IN-to-SYS pass-through path to pass the input voltage to the system
* Advanced system power-path management avoids batteries frequent charging and discharging
* Advanced system power-path management allows 3A fast charging and powering Raspberry Pi at the same time
* On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
* Batteries attach via PH2.0-2P or XH2.54-2P
<span style="font-weight:bold">Intelligent and safe power management</span>
* Equipped with momentary button for easy power control
* Press the button to turn on
* Press the button and hold for 1~2seconds to reboot
* Press the button and hold for 3~7seconds to implement safe shutdown
* Press the button and hold for >8seconds to force shutdown
* Supports safe shutdown and full poweroff from software
* On-board blue LED shows the status of power on, reboot and shutdown
* AC power loss or power adapter failure detection (LED and GPIO indication)
* Optional to enable Auto power on when power applied or restored
* Automatic safe shutdown when battery low (voltage <3.0V)
* Ultra-low standby power consumption to maximize battery life
<span style="font-weight:bold">Integrated cooling fan that allows the heat from your Raspberry Pi to dissipate!</span>
* Completely solve the overheating problem of your Raspberry Pi
* Efficient drop temp of Raspberry Pi CPU
<span style="font-weight:bold">Misc</span>
* Powers the Raspberry Pi via the 40-pin header - no additional cabling required
* Standard Raspberry Pi extension interface, compatible with other expansion boards
* DC power jack (5.5*2.5mm) and Type-C socket convenient for power input
* On-board PH2.0 connector allows to connect external power switch and DIY your perfect case
* On-board XH2.54 power output connector allows to power other devices
* Mounting holes and standoffs provide mechanical stability of the Raspberry Pi and X708 assembly
|-
| SPECIFICATION ||
* <span style="color:red;font-weight:bold">Power supply via Type-C socket: 5Vdc ±5%, ≥3A; Via DC power jack: 5Vdc ±5%, ≥4A</span>
* UPS output : 5.1V ±5% Max 8A
* UPS charging current: 1.8~2.2A / 2.3~3.2A
* Terminal Battery Voltage : 4.24V
* Recharge Threshold : 4.1V
* Battery: 3.7 Lithium Battery
|-
| NOTES ||
* <span style="color:red;font-weight:bold">Do not apply power to your Raspberry Pi via the Micro USB socket or Type-C socket.</span>
* <span style="color:red;font-weight:bold">Do use the battery with built-in protection circuit</span>
|}
==Packing List==