5,123
edits
Changes
Jump to navigation
Jump to search
===Software & Hardware Guide===
* [[X708-Software]]
* [[X708-Hardware]]
* AutoCAD Drawing Interchange Format file: [[File:X708-PCB-V1.0.zip|none]]
X708
,[[File:X708-v2.0-01.jpg|thumb|right|X708+X728-A2]]
==Foreword==
<span style="color:red;"> NOTE: The X708 UPS DOES NOT support Raspberry Pi 5 hardware
===Why did X708 come out？===
==Working principle==
The GPIO13 is used to control the power button, It goes high for 3 seconds that means the power switch is pressed and held for 3 seconds. then the X708 will issue a pulse to inform the system to implement safeshutdown via GPIO5, and will monitor the GPIO12, once shutdown process is implemented, GPIO 12 will go to low and will be recognized by the X708, then the X708 will wait for 7-8seconds then fully cut off power.
The hardware and its firmware are verified. if you have a DMM, you can use it mesuare the GPIO voltage which will be helpful to understand above.
==Features==
==User Manual==
===Installation Video===
Installation Video for Raspberry Pi 4+X825 V1.5+X708/U100/X735+X825-C7 Case: https://youtu.be/kKIPf4AsiYY
{{#ev:youtube|https://youtu.be/HGPpfDbfyxM}}
===Software & Hardware Guide===
* [[X708-script]]: This script is required to install to enable safe shutdown function.
* [[X708-Hardware]]: Provides some hardware parameter information
* AutoCAD Drawing Interchange Format file: [[File:X708-PCB-V1.0.zip|none]]
==FAQ==