5,121
edits
Changes
Jump to navigation
Jump to search
Please refer to [[U100]] if you want a cheap version, [[U100]] provides enough voltage¤t output and AUTO Power ==Update History=====X708 V2.0 is released===x708 v2.0 is release on funtion, '''no extra programmable function'''April 2022.(PS: U100 has been discontinued.) <span style="color:red;font-weight:bold">[NOTE]</span>
Current Update:* Added protection circuit and alarm function when the battery is reversely connected (RESERVED will be on)* Supports the control of two fan speeds* Solved the problem that the old version can't charge when the battery is V1.2exhausted* Improved AUTO ON function* Added battery over-discharge function* Improved power path management function: when external AC power is supplied, there are the following change with V1AC PSU supplies power to the UPS shield and also charges the battery.0;
<span style="color:red;font==X708 V1.2(off-weight:bold">Some changesproduction)===Update:</span>
A: Is there a corresponding UPS NAS solution Firstly you have to get the script for power management well installed and run at boot. You can use the onboard power switch to verify , press and hold for 3seconds, the blue LED will flash slowly and the shutdown is going then all LEDs will be off. once this works, then you can use the GPIO13 control.5-inch hard drives?
Q: Sorry, There is no UPS NAS solution for 3The hardware and its firmware are verified.5-inch hard drive because the 3.5-inch hdd request 12V voltageif you have a DMM, so we have no plans to support this demand for the time being. BUT you can refer to [[X835]]//[[X832]], and they can solve some of your needs, they need external power supply. ==Safety Instructions and Warnings==You must read these safety instructions and warnings before charging your batteries. * <span style="color:red;">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly. * <span style="color:red;">Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-". * <span style="color:red;">Do not mix and use old batteries and new batteries, or batteries with different brand names. * <span style="color:red;">Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first. * <span style="color:red;">When charging Battery Pack, please put battery in a fire proof container. Please don't leave mesuare the X708 on the wood material or carpet and unattended. * <span style="color:red;">Must keep the X708 away from children. * Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebatteryGPIO voltage which will be helpful to understand above.com/en/
* [[X708-Software]]===Installation Video===* [[Installation Video for Raspberry Pi 4+X825 V1.5+X708/U100/X735+X825-Hardware]]C7 Case: https://youtu.be/kKIPf4AsiYY
AutoCAD Drawing Interchange Format file{{#ev: [[Fileyoutube|https:X708-PCB-V1//youtu.0.zip|none]]be/kKIPf4AsiYY}}
==FAQ==Q1:What battery is recommended Installation video for Raspberry Pi 4+X857 V1.2/X862 V1.0/X872 V1.1+X708?/U100+X857-C1 Case: https://youtu.be/HGPpfDbfyxM
A{{#ev:Please use big brand and high quality batteries, like PANPASONIC, Toshiba..youtube|https://youtu. be/HGPpfDbfyxM}}
Q3A: How to restart the pi board when AC Power supply is connected? A: Please enable 'AUTO POWER ON' or 'AUTO ON' function if you want restart when the AC Power supply is reapplied* Pls use high quality batteries from PANPASONIC, Toshiba, etc. Q4: Which lithium * Lithium battery can be used: A: need to meet the following 2 conditions : 1. Working voltage: 3.6V-3.7V ; 2. Maximum voltage after full: 4.2V Q5: What type connector to request for lithium battery? A: X708 provides two type battery connectors: PH2.0-2P and XH2.54-2P, you can connect two battery at the same time, BUT please use the same model batteries, also please pay attention that the polarity of the XH2.54 and PH2.0 connectors is different. Q6: About auto shutdown, found your board will auto shutdown. A: Please check if enable the ASD function (shorted the ASD header), if you enable the ASD function, please sure your oeration is right: first, place the battery into the battery holder, insert the jumper to ASD header <span style="color:red;">after 3 second</span>,this is very important!! Q7: Does the X708 support to use without any battery installed? A: Yes, it is ok to * Do not use the X708 without battery, but please note that do not use low quality power supply. Q8: Why the X708 does not work normally?with built-in protection circuitA: Please make sure you have install the script before use, please refer to [[X708File:18650_battery_size-Software2.jpg|400px]]
Q9'''Q3:If "AON" Is there a corresponding UPS NAS solution for 3.5-inch hard drives?'''* A: Sorry, There is shortedno UPS NAS solution for 3.5-inch hard drive because the 3.5-inch hdd request 12V voltage, so we have no plans to support this demand for the time being. BUT you can you use a latching power switch refer to turn the x708 onX835//offX832, or is it on all the timeand they can solve some of your needs, regardless of the switch?they need external power supply.
Q10'''Q7:Does the X708 support to use without any battery installed?'''* A: Yes, it is ok to use the latching switch?X708 without battery, but please note that do not use low quality power supply.
A'''Q8:No, Why the X708 does not support work normally?'''* A: Please make sure you have install the script before use, please refer to connect latching switch, only support momentary switch.[[X708-Software]]
Q11'''Q10: What is Does the fan type of X708 support to use the latching switch?'''* A:No, the X708?does not support to connect latching switch, only support momentary switch.
Q12'''Q13: Can you Why does the X708 power off automatically?'''* A: Please use 3.7V lithium polymer battery without protection board, or battery with enough discharge capacity, or the X708 will power off automatically when use with a poe hat high load. Refer to provide the power?video test: https://youtu.be/Saco6rJm4ZQ
A: No, not suggest to use like this.
==Installation Video==
Installation Video for Raspberry Pi 4+X825 V1.5+X708/U100/X735+X825-C7 Case: https://youtu.be/kKIPf4AsiYY
{{#ev:youtube|https://youtu.be/kKIPf4AsiYY}}
Installation video for Raspberry Pi 4+X857 V1.2/X862 V1.0/X872 V1.1+X708/U100+X857-C1 Case: https://youtu.be/HGPpfDbfyxM
{{#ev:youtube|https://youtu.be/HGPpfDbfyxM}}
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
X708
,{{GD Template Impl}}
[[File:X708-V2.0.jpg|thumb|X708 V2.0 UPS HAT]][[File:X708-V12-IMG-9489-interface.jpg|thumb|X708 V1.2 UPS HAT(Sold Out)]][[File:X708-IMG-8494-sche.jpg|thumb|X708 V1.0 UPS HAT(Sold Out)]]
[[File:X708-IMG-8492.jpg|thumb|X708 V2.0/V1.2/V1.0 UPS HAT]]
[[File:X708-IMG-8515.jpg|thumb|X708 V2.0/V1.2/V1.0 UPS HAT]]
[[File:X708-IMG-8517-AM-1.jpg|thumb|right|X708 V2.0/V1.2/V1.0 Battery]]
[[File:X708-v2.0-01.jpg|thumb|right|X708+X728-A2]]==Foreword==<span style="color:red;"> NOTE: The X708 UPS DOES NOT support Raspberry Pi 5 hardware ===Why did X708 come out？===
Although we provide a compelete raspberry pi NAS solution with NAS shield([[X825]]/[[X857]]/[[X829]]/[[X835]] etc.),[[X735]] and matching metal case, but we still have received many feedbacks that want to support UPS, so we have to respond to this request.
Our original intention of designing X708 is to match with NAS shell (such as [[X829-C1]], [[X857-C3]] or [[X857-C1]], [[X825-C2 Case |X825-C7]]) to provide a raspberry pi NAS solution with UPS function. In order to save space, '''we must separate the battery''' from the UPS expansion board when designing . This is also the biggest difference between X708 and X728;
===Safety Instructions and Warnings===
You must read these safety instructions and warnings before charging your batteries.
* <span style="color:red;">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
* <span style="color:red;">Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".
* <span style="color:red;">Do not mix and use old batteries and new batteries, or batteries with different brand names.
* <span style="color:red;">Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
* <span style="color:red;">When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X708 on the wood material or carpet and unattended.
* <span style="color:red;">Must keep the X708 away from children.
* Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebattery.com/en/
* Remove the ASD function but you can achieve this function through software programming. Please refer to [[X708-Software]]
* New added GPIO16 to control fan speed, HIGH=>fast fan speed, LOW=>slow fan speed; refer to [[X708-Hardware]]
'''Some key features:'''
# Excellent UPS function such as Power Loss Detection(PLD), Automatic Safe Shutdown(ASD), Auto Power On(AON) etc., '''DC 5V Max. 8A 6A output''';
# With cooling fan, no extra cooling solution.
# HAT size. Separate the battery from the expansion board, which can save a lot of space, which will bring more flexibility.
# Reserved two kind battery port (XH2.54 and PH2.0), supports 3.7V 18650 lithium battery and 3.7V lithium polymer battery, No capacity limit, only request '''3.7V''' lithium battery (No include lithium battery)
==What you may care aboutWorking principle==A: I want The GPIO13 is used to a NAS storage solutioncontrol the power button, Does X708 support? Q: We have received many feedbacks It goes high for 3 seconds that want to support UPS, so we design means the X708 base on [[X728]], we separated the battery holder from the UPS expansion board to save space, thus X857-C1(metal case power switch is pressed and held for mSata NAS solution), X829-C1 (metal case for dual 23 seconds.5" sata NAS solution), X825-C7(metal case for singel 2.5" sata NAS solution) can hold then the all accessories needed for X708 will issue a pulse to inform the complete NAS solution. There metal case can hold 2 cell 18650 battery holder. A: I want system to use a larger capacity or more 18650 batteriesimplement safeshutdown via GPIO5, what should I do? Q: In this case and will monitor the GPIO12, the inside space of metal case once shutdown process is definitely not enoughimplemented, but you can place GPIO 12 will go to low and will be recognized by the battery outside X708, then the metal case. We have reserved a hole at the back of the metal casing X708 will wait for you to connect to the battery cable7-8seconds then fully cut off power.
==Features==
<span style="font-weight:bold">Smart and powerful Uninterruptible Power Supply (UPS)</span>
* Provides continuous operations for up to 10~30hours (depending on battery type and qty used)
* Max 5.1V 8000mA 6000mA Power Backup for even the most demanding RPi set ups
* Supports 2A/3A fast battery charging
* Integrated over current protection and over voltage protection
| SPECIFICATION ||
* <span style="color:red;font-weight:bold">Power supply via Type-C socket: 5Vdc ±5%, ≥3A; Via DC power jack: 5Vdc ±5%, ≥4A</span>
* UPS output : 5.1V ±5% Max 8A. 6A
* UPS charging current: 1.8~2.2A / 2.3~3.2A
* Terminal Battery Voltage : 4.24V
* <span style="color:red;font-weight:bold">Do not use the battery with built-in protection circuit.</span>
|}
==How to Power==
* Power via DC5521 Jack of X708, 5.1Vdc +/-5% , ≥4A (DC5525 Jack is compatible with DC5521, also support 5V PSU with DC5525 Jack)
* Power via USB Type-C port of X708, 5.1Vdc +/-5% , ≥3A (Geekworm Type-C 5V 4A 20W power supply is recommended.）
==X728-C1==
X728-C1 is a metal case for X708 / X735 or X728 V2.2 / V2.1 / V2.0.
Installation Video: https://youtu.be/QOG30LXb6ds
<gallery>
01-IMG-3946-main.jpg|for X735/X708/X728 V2.x/
02-IMG-3892-开关卖点.jpg|with metal switch
03-IMG-3894-散热.jpg|active cool
04-IMG-3907-场景图.jpg|application
06-IMG-3941-size.jpg|dimension
IMG-3916-acce.jpg|x728-c1 Accessories
IMG-3945-GPIO排线.jpg|with GPIO hole
</gallery>
==Packing List==
==User Manual==
===Software & Hardware Guide===* [[X708-script]]: This script is required to install to enable safe shutdown function.* [[X708-Hardware]]: Provides some hardware parameter information* AutoCAD Drawing Interchange Format file: [[File:18650_battery_sizeX708-2PCB-V1.0.jpgzip|400pxnone]]
==FAQ==
'''Q1: What battery is recommended for X708?'''
'''Q2: What type connector to request for lithium battery?'''
* A: X708 provides two type battery connectors: PH2.0-2P and XH2.54-2P, you can connect two battery at the same time, BUT please use the same model batteries, also please pay attention that the polarity of the XH2.54 and PH2.0 connectors is different.
'''Q4: How to restart the pi board when AC Power supply is connected?'''* A:Sorry, this Please enable 'AUTO POWER ON' or 'AUTO ON' function if you want restart when the AC Power supply is not supportedreapplied.
'''Q6: About auto shutdown, found your board will auto shutdown.'''
* A: Please check if enable the ASD function (shorted the ASD header), if you enable the ASD function, please sure your oeration is right: first, place the battery into the battery holder, insert the jumper to ASD header <span style="color:red;">after 3 second</span>,this is very important!!
'''Q9:If "AON" is shorted, can you use a latching power switch to turn the x708 on/off, or is it on all the time, regardless of the switch?'''
* A:Sorry, this is not supported.
'''Q11: What is the fan type of the X708?'''* A: It is szie 3010 cooling fan with PH2.0-2P connector.
'''Q12: Can you use the X708 with a poe hat to provide the power?'''
* A: No, not suggest to use like this.
<!--Add review function! -->
<comments />
[[Category:Product Manual]]
[[Category:Raspberry pi]]