Changes

'''Q1:What battery is recommended for X708?'''A:Please * Pls use big brand and high quality batteries, like from PANPASONIC, Toshiba, etc.* Lithium battery need to meet following 2 conditions: 1. Working voltage: 3.6V-3.7V; 2. Maximum voltage after full: 4.2V* Do not use the battery with built-in protection circuit

'''Q3: How to restart the pi board when AC Power supply is connectedIs there a corresponding UPS NAS solution for 3.5-inch hard drives? A: Please enable 'AUTO POWER ON' or 'AUTO ON' function if you want restart when the AC Power supply is reapplied.  Q4: Which lithium battery can be used:  * A: to meet the following 2 conditions 1. Working voltage: Sorry, There is no UPS NAS solution for 3.6V5-inch hard drive because the 3.7V 2. Maximum 5-inch hdd request 12V voltage after full: 4.2V  Q5: What type connector , so we have no plans to request support this demand for lithium battery? A: X708 provides two type battery connectors: PH2.0-2P and XH2.54-2P, you can connect two battery at the same time, being. BUT please use the same model batteries, also please pay attention that the polarity of the XH2.54 and PH2.0 connectors is different.  Q6: About auto shutdown, found your board will auto shutdown. A: Please check if enable the ASD function (shorted the ASD header), if you enable the ASD function, please sure your oeration is right: first, place the battery into the battery holder, insert the jumper can refer to ASD header <span style="color:red;">after 3 second<X835//span>X832,this is very important!!  Q7: Does the X708 support to use without any battery installed? A: Yesand they can solve some of your needs, it is ok to use the X708 without battery, but please note that do not use low quality they need external power supply. Q8: Why the X708 does not work normally? A: Please make sure you have install the script before use, please refer to [[X708-Software]]  Q9:If "AON" is shorted, can you use a latching power switch to turn the x708 on/off, or is it on all the time, regardless of the switch? A:Sorry, this is not supported.  Q10:Does the X708 support to use the latching switch? A:No, the X708 does not support to connect latching switch, only support momentary switch.

Q11'''Q6: What About auto shutdown, found your board will auto shutdown.'''* A: Please check if enable the ASD function (shorted the ASD header), if you enable the ASD function, please sure your oeration is right: first, place the battery into the fan type of battery holder, insert the X708?jumper to ASD header <span style="color:red;">after 3 second</span>,this is very important!!

'''Q7: Does the X708 support to use without any battery installed?'''* A: It Yes, it is szie 3010 cooling fan with PH2.0-2P connectorok to use the X708 without battery, but please note that do not use low quality power supply.

Q12'''Q9: Can If "AON" is shorted, can you use the X708 with a poe hat latching power switch to provide turn the x708 on/off, or is it on all the time, regardless of the powerswitch?'''* A:Sorry, this is not supported.

'''Q10:Does the X708 support to use the latching switch?'''* A: No, the X708 does not suggest support to use like thisconnect latching switch, only support momentary switch.

Q13'''Q12: Is there Can you use the X708 with a corresponding UPS NAS solution for 3poe hat to provide the power?'''* A: No, not suggest to use like this.5-inch hard drives?