2,869
edits
Changes
Jump to navigation
Jump to search
On|-board push button to control power on /off (Press| SPECIFICATION ||* <span style="color:red;font-weight:bold">Power supply via Type-ONC socket: 5Vdc ±5%, Hold the button pressed at least 2s -OFF)≥3A;</span>* UPS output : 5.1V ±5% Max 3AOn-board pin header allows to select AUTO power-on when power supplied or battery installed* UPS charging current: 1.8~2.2A * Terminal Battery Voltage : 4.2V* Recharge Threshold : 4.1VUltra|-low standby power consumption of μA to maximize battery life| NOTES ||On* <span style="color:red;font-board blue LED shows the status of weight:bold">Do not apply power on/off Powers the to your Raspberry Pi via the 40-pin header Allows power input via Micro USB socket or Type-C socket or XH2.54 connector On* <span style="color:red;font-weight:bold">Do not use 18650 battery with built-board XH2in protection circuit.54 power input connectors allows to integrate with your products</span> DON'T * <span style="color:red;font-weight:bold">NOT supports software safe shutdown.</span>|}
1 x Jumper link Pitch 2.54mm==User Manual==
8x M2.5 *5mm Screws
4x M2.5 *20+6mm Spacers==FAQ==Q: Will the X706 work with X728-A2?
4x M2A: No, X706 does not support to use with X728-A2. There is no battery connector port on X706.5 *20mm Spacers
==User Manual== ==FAQ==Q: How many amps can be drawn from the XH2.54 5V out connection?
X706
,{{GD Template Impl}}
[[File:X706-IMG-0237.jpg|thumb|right|x706]]
[[File:IMG-0224-Interface.jpg|thumb|right|x706]]
[[File:X706-IMG-0221.jpg|thumb|right|x706]]
[[File:X706-IMG-0225-size.jpg|thumb|right|x706]]
==Overview==
The X706 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides an advanced uninterruptible power supply and power . The X706 can be stacked with other Raspberry Pi accessory boards for enhanced applications. The X706 can also be used with the X820/X825 (2.5" HDD/SSD Shield), X850/X855/X857 (MSATA SSD shield), X862（M.2 NGFF SATA SSD Shield）, X872/X873（NVMe M.2 SATA SSD Shield）.
==Safety Instructions and Warnings==
You must read these safety instructions and warnings before charging your batteries.
* <span style="color:red;">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
* <span style="color:red;">Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".
* <span style="color:red;">Do not mix and use old batteries and new batteries, or batteries with different brand names.
* <span style="color:red;">Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
* <span style="color:red;">When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X706 on the wood material or carpet and unattended.
* <span style="color:red;">Must keep the X706 away from children.
* Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebattery.com/en/
==Features==
{| class="wikitable"|-| FOR USE WITH || Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+ / 4 Model B|-| Operating System || * Raspbian Stretch|-| KEY FEATURES ||*Smart Uninterruptible Power Supply (UPS) *Out 5.1V Max. 8000mA enough 3000mA Power Backup for even the most demanding Raspberry Pi set ups *Supports 3A via Type-C socket fast charging *Can work with single or dual 18650 Lithium Ion battery *Integrated battery protection circuit *Integrated over current protection and over voltage protection Integrated 10-A fully-integrated synchronous boost converter *Intelligent automatic charging and discharging *On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100% *On-board red LED show the status of battery charging or fully charged*On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF)*On-board pin header allows to select AUTO power-on when power supplied or battery installed*Powers the Raspberry Pi via the 40-pin header - no additional cabling required*Standard Raspberry Pi extension interface, compatible with other expansion boards*Allows power input via Type-C socket or XH2.54 connector*On-board XH2.54 power input connectors allows to integrate with your products*DON'T supports software safe shutdown.
==Packing List==
* 1 x X706 V1.1 18650 UPS Shield* 1 x Jumper link Pitch 2.54mm* 8 x M2.5 *5mm Screws* 4 x M2.5 *20+6mm Spacers* 4 x M2.5 *20mm Spacers
A:The XH2.54 5V out conntor share 5V with the Raspberry pi motherboard, the maximum amp is 3A.
<!--Add review function! -->