Open main menu
Geekworm Wiki

Changes

X650

7,297 bytes added, 10:38, 15 September 2023
{{GD Template Impl}}
[[File:X650-IMG-5483.jpg|thumb|right|X650 kvm shield]]
[[File:X650-IMG-5611-Interface-Schematic.jpg|thumb|right|X650 kvm hardware diagram]][[File:X650-IMG-5476.jpg|thumb|right|10-Pin Header function]][[File:X650-IMG-5474.jpg|thumb|right|10-Pin Header function]][[File:X650-IMG-5509-half-bracket.jpg|thumb|right|X650 kvm shield]]
[[File:X650-IMG-5514-acce.jpg|thumb|right|X650 Packing List]]
==Overview==
X650 shield is a member of the [[PiKVM]] <ref>PiKVM © belongs to https://pikvm.org</ref> family. It is a Raspberry Pi CM4-based KVM-over-IP remote management PCI Express card that can be easily inserted into 1U and 2U form factors for PC, Sun and Mac platforms. It adds remote, unblocked, BIOS-level access and control to any server. Accessed from any web browser, it provides anytime, anywhere KVM access with security, stability and speed.
This IP KVM PCI card X650 offers KVM control from the BIOS-level onward. Reboot, monitor the entire boot process, and interact with your connected system easily, while the integrated remote ATX power control allows you to switch the machine on/off, reset it, and monitor power & storage LED activity remotely.
==Features==
* Only Compatible with the Raspberry Pi Compute Module 4 and Compatible with all variants， variants, and full Compatible with [https://pikvm.org/ PiKVM OS] (Raspberry Pi-based KVM over IP)* <span style="color:red;">Only compatible with '''PiKVM V3 OS''', NOT support '''V4'''</span>
* PCI style, installs justs like any PCI card into a tower / desktop PC
* Supports video and '''[[Enable_pikvm_hdmi_audio|audio]]'''.
* Low profile and standard profile bracket Inside-both Mini and standard desktop host workable
* HDMI Full HD capture based on the Toshiba TC358743 chip，supports HDMI input resolutions up to 1920x1080@60Hz
* OTG Keyboard & mouse; Mass Storage Drive emulation
* Hardware Real Time Clock (RTC) with CR1220 coin battery socket
* Gigabit Ethernet socket supporting Power over Ethernet (POE) expansion, reserve the 4-PIN POE Pin.(Need extra PoE module)
* Equipped with cooling fan that allows the heat from your CM4 to dissipate
==Packing ListHow to Power==* 1 x Power Input: 5.1Vdc +/-5% , ≥3A (Power via USB Type-C '''PWR''' port of X650 V1.3 Expansion Board)* 1 x X680Use splitter to get POE power supply, refer to [[PD3005G-A1 V13A | PoE splitter]].0 cooling fan Adapter board* 1 x Colorful ATX Control Cable (Cable Length[[File: 47cm / 18IMG-5667-How-to-Power-970x600.50 inch)jpg|800px]] About POE Splitter, refer to [[PD3005G-3A]] ==How to Cool==* 1 x Mini HDMI to HDMI Cable X650 equipped with an active cooling fan board (Length: 50cm/19.69X680-A1)that can cool your Raspberry Pi CM4， and X680-A1 is included in the [[X650#Packing List | Packing List]]; * 1 x USBIn fact, if you don't like fans, you can try [[C235]], which can fully meet the cooling needs of CM4, but [[C235]] is '''NOT''' included in the [[X650#Packing List | Packing List]];<gallery>File:X650-A to USBIMG-C OTG Cable (Length: 50cm/195480.69)jpg|X680-A1* 1 x Standard height PCIe AddFile:C235-in Card I/O Bracket06.jpg | [[C235]]* 1 x Low height PCIe Add-in Card I</O Bracket* 1 x Screws Packgallery>
==User Manual==
First you need to make sure your hardware connections are correct, please refer to the video and diagram below
==FAQ=Installation Video===* First of all, we recommend you to get more FAQ information on the official website: [https://docs.pikvm.org/faq/ official FAQ], or check the following FAQ;* You can post a issue ticket at [https://geekworm.com/community/forum/topic/78220/pikvm-faq Geekworm forum] or email to us (support@geekworm.com) and attached your installation pictures or videos to get some help.* Blog sharing for referenceX650: https://www.andysblogyoutu.debe/kvm-over-ip-pikvm-als-bausatz2nKzQlkTXF8
{{#ev:youtube|https://youtu.be/2nKzQlkTXF8}}
===Connection Diagram===
'''Overall connection diagram：'''
<span style="color[[File:red;fontX650-Connection-weight:bold">Q: Why is the Diagram.jpg|800px|X650 not working?</span>Connection Diagram]]
A: ===OS download and install===1. Firstly, need prepair a micro sd card, a minimum 16 Gb class 10 memory card is recommended.
12. First you need to make sure your physical connection Download an appropriate OS image for the PiKVM, the url link is correct, https://pikvm.org/download/ or you can email us at support@geekwormclick [https://files.pikvm.org/images/v3-hdmi-rpi4-latest.img.com xz this one] to confirm your physical connection;download it. (Please use the V3 HAT OS)
23. Make sure to use the right pikvm Flash OS.image into Micro SD card
[[File:Pi4-V3-HAT.png|800px]]''' 1) How to installing the Operating System''' (CM4 without eMMC)
3:Refer to [https://www. Make sure CM4 is tightly connected with X650raspberrypi. (This is very important, and this error often occurs)com/documentation/computers/getting-started.html#installing-the-operating-system Official installation tutorial]
[[File:X650-IMG-5605-'''2.jpg|800px]]) How to flash OS onto the eMMC of CM4? (CM4 with eMMC)'''
::a. Short nBOOT&GND, refer to the picture below.
'''Q: How to switch to root user?''':[[File:X650-IMG-5474-1.jpg|500px]]
A: run the following command: su rootThen type the password, the default password is 'root' alsob.Connect Type-C OTG to your computer
::c. Power the X650 via PWR Type-C with your 5V Power adaper
Q: Does the x650 support audio?:d. Then rerfer to [https://www.jeffgeerling.com/blog/2020/how-flash-raspberry-pi-os-compute-module-4-emmc-usbboot this tutorial] to flash pikvm OS
A: Yes:e. Refer to [[Enable pikvm hdmi audio]]Remove the jumper of nBOOT&GND after flashing is complete, then restart your device;
4. Power the device, then open explore to login the pikvm web ui.
Q: Does the x650 support OLED display?===Enable RTC ===Due to different RTC chips with official PiKVM hardware, you still need to '''configure RTC''' to make RTC work normally.
A: YesFirstly, insert the '''C1220''' button battery. please contact us at mailrun the following command in web terminal window: support@geekworm.com， But we actually think OLED displays are pointless
1. switch to 'root' user
su root
then type the password, and the default password is 'root' also.
'''Q: How 2. Switch OS to enable RTC?''' A: Firstly, insert the C1220 button battery.run the following command:writable mode
rw
3. Edit the /boot/config.txt file, and change line <code>dtoverlay=i2c-rtc,pcf8563</code> to <code>dtoverlay=i2c-rtc,ds1307</code> (due to use the different RTC chip).
sudo nano /boot/config.txt
#Then change the line: save & '''dtoverlay=i2c-rtc,pcf8563''' to '''dtoverlay=i2c-rtc,ds1307reboot'''the device; #4.Test & setting RTC #Display , write&read the current time of the Raspberry Pito RTC DS1307 date #Write the time of Raspberry Pi to DS1307
sudo hwclock -w
#Read the time of DS1307
sudo hwclock -r
 
5. Swith OS to readonly mode
ro
 
===Enable OLED display===
Run the following command in web terminal window:
rw
systemctl enable --now kvmd-oled
ro
If you are using <code>PiKVM OS V3 Pre-Assembled</code>, the OLED configuration is already pre-installed, you can ignore this step.
 
===Enable pikvm hdmi audio===
Refer to [[Enable pikvm hdmi audio]]
 
==Packing List==
* 1 x X650 V1.3 Expansion Board
* 1 x X680-A1 V1.0 cooling fan Adapter board
* 1 x Colorful ATX Control Cable (Cable Length: 47cm / 18.50 inch)
* 1 x Mini HDMI to HDMI Cable (Length: 50cm/19.69)
* 1 x USB-A to USB-C OTG Cable (Length: 50cm/19.69)
* 1 x Standard height PCIe Add-in Card I/O Bracket
* 1 x Low height PCIe Add-in Card I/O Bracket
* 1 x Screws Pack
 
==FAQ==
* First of all, we recommend you to get more FAQ information on the official website: [https://docs.pikvm.org/faq/ official FAQ], or check the following FAQ;
* You can post a issue ticket at [https://geekworm.com/community/forum/topic/78220/pikvm-faq Geekworm forum] or email to us (support@geekworm.com) and attached your installation pictures or videos to get some help.
* Blog sharing for reference: https://www.andysblog.de/kvm-over-ip-pikvm-als-bausatz
 
<html>
<details>
<summary>Why the device does not show the video only display <b><span class="tb_red">No Signals</span></b>?</summary>
<ul><li>Double-check that the video capture device is connected correctly and tightly. For the CSI bridge, this should be exactly the camera port;</li>
<li>Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard).</li>
<li>Your computer maybe enter sleep mode, please exit sleep mode</li>
<li>If your desktop only has a VGA display port, there may be no video signal when you use <b>VGA to HDMI adapter</b>, and there is no way to solve this; However, you can try to lower the resolution and restart the PC to test, but the probability of success is very low.</li>
</ul>
</details>
 
<details>
<summary>Why is the X650 not working?</summary>
A:
<br />
1. First you need to make sure your physical connection is correct, or you
can email us at support@geekworm.com to confirm your physical connection;
<br />
2. Make sure to use the right pikvm OS.
<br />
<p>
<a href="/File:Pi4-V3-HAT.png" class="image"
><img
alt="Pi4-V3-HAT.png"
src="/images/thumb/b/be/Pi4-V3-HAT.png/800px-Pi4-V3-HAT.png"
decoding="async"
width="800"
height="616"
srcset="
/images/thumb/b/be/Pi4-V3-HAT.png/1200px-Pi4-V3-HAT.png 1.5x,
/images/b/be/Pi4-V3-HAT.png 2x
"
data-file-width="1443"
data-file-height="1112"
/></a>
</p>
3. Make sure CM4 is tightly connected with X650. (This is very important,
and this error often occurs)
<br />
<p>
<a href="/File:X650-IMG-5605-2.jpg" class="image"
><img
alt="X650-IMG-5605-2.jpg"
src="/images/thumb/4/4c/X650-IMG-5605-2.jpg/800px-X650-IMG-5605-2.jpg"
decoding="async"
width="800"
height="519"
srcset="
/images/thumb/4/4c/X650-IMG-5605-2.jpg/1200px-X650-IMG-5605-2.jpg 1.5x,
/images/thumb/4/4c/X650-IMG-5605-2.jpg/1600px-X650-IMG-5605-2.jpg 2x
"
data-file-width="2000"
data-file-height="1298"
/></a>
</p>
</details>
 
<details>
<summary>How to switch to root user?</summary>
<p>A: run the following command:</p>
<pre>su root</pre>
<p>Then type the password, the default password is 'root' also.</p>
</details>
 
<details>
<summary>Does the x650 support audio?</summary>
<p>
A: Yes. Refer to
<a href="/Enable_pikvm_hdmi_audio" title="Enable pikvm hdmi audio"
>Enable pikvm hdmi audio</a
>
</p>
</details>
 
<details>
<summary>Does the x650 support OLED display?</summary>
<p> A: Yes. </p>
<p>Please connect the OLED shield as shown below (But we actually think OLED displays are pointless):</p>
<p><a href="/File:X650-IMG-5611-Interface-Schematic.jpg" class="image"><img alt="X650-IMG-5611-Interface-Schematic.jpg" src="/images/thumb/e/ea/X650-IMG-5611-Interface-Schematic.jpg/800px-X650-IMG-5611-Interface-Schematic.jpg" decoding="async" width="800" height="780" srcset="/images/thumb/e/ea/X650-IMG-5611-Interface-Schematic.jpg/1200px-X650-IMG-5611-Interface-Schematic.jpg 1.5x, /images/thumb/e/ea/X650-IMG-5611-Interface-Schematic.jpg/1600px-X650-IMG-5611-Interface-Schematic.jpg 2x" data-file-width="2000" data-file-height="1951"></a>
</p>
<p>Then run the following command to enable oled display</p>
<pre>
rw
systemctl enable --now kvmd-oled
ro
</pre>
 
<p>About OLED shield, refer to <a href="/0.96_inch_OLED_Shield" title="0.96 inch OLED Shield">OLED</a> </p>
 
</details>
 
 
<details>
<summary>Does the X650 support PoE power? How to enable PoE Power?</summary>
<p>
A: The X650 reserve the POE port, but need to use with customized POE
module to support PoE power, and the customized POE module still not
release now. And the X650 does not support the Raspberry Pi official PoE
module. Recommend to use PiKVM-A8 kit, if you need PoE power.
</p>
</details>
 
<details>
<summary>What's the function of mini HDMI?</summary>
<p> A: The X650 mini hdmi is to output some information from the PiKVM OS server, please refer to the below picture: </p>
<a href="/File:X650-Mini-HDMI-Out.jpg" class="image"><img alt="X650-Mini-HDMI-Out.jpg" src="/images/thumb/c/c4/X650-Mini-HDMI-Out.jpg/800px-X650-Mini-HDMI-Out.jpg" decoding="async" width="800" height="600" srcset="/images/thumb/c/c4/X650-Mini-HDMI-Out.jpg/1200px-X650-Mini-HDMI-Out.jpg 1.5x, /images/thumb/c/c4/X650-Mini-HDMI-Out.jpg/1600px-X650-Mini-HDMI-Out.jpg 2x" data-file-width="1920" data-file-height="1440"></a>
</details>
</html>
 
==References==
<references />
Retrieved from "https://wiki.geekworm.com/Special:MobileDiff/15790...17455"